1. Einleitung
Thank you for choosing the ALUSSO Motion Sensor Outdoor Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new security light. Please read these instructions thoroughly before installation and retain them for future reference.
Image: ALUSSO 30W LED Security Light installed on a house, illuminating the front yard.
2. Sicherheitshinweise
WARNUNG: STROMSCHLAGGEFAHR. Vor Installation oder Wartung die Stromzufuhr an der Sicherung oder dem Leitungsschutzschalter unterbrechen.
- Dieses Produkt muss gemäß den geltenden Installationsvorschriften von einer Person installiert werden, die mit der Konstruktion und Bedienung des Produkts und den damit verbundenen Gefahren vertraut ist.
- Use only supplied accessories for installation.
- Ensure the balancing mechanism is secure after installation.
- Modifizieren oder verändern Sie das Produkt nicht.
- Nicht in der Nähe von brennbaren Materialien installieren.
- This fixture is Class II safety-rated and does not require a ground wire.
3. Packungsinhalt
Vor der Installation prüfen Sie bitte, ob alle Komponenten vorhanden und unbeschädigt sind.
Image: Diagram showing the ALUSSO flood light components and included accessories for installation.
- ALUSSO Motion Sensor Outdoor Flood Light Unit (1)
- Montagehalterung (1)
- Screws and Wall Anchors (Set)
- Wire Connectors (Yellow Quick-Connects) (Set)
- Waterproof Gasket (1)
- Bedienungsanleitung (1)
- Garantiekarte (1)
4. Produktüberschreitungview
The ALUSSO WL-YDR-230P is a versatile and durable outdoor security light designed to provide powerful illumination and enhanced safety for your property.
Bild: Überview of ALUSSO 30W LED Security Light features.
- Leistung und Helligkeit: 30W, 3500 Lumens, covering up to 2000 sq. ft.
- Farbtemperatur (3CCT): Adjustable between 3000K (Warm White), 4000K (Natural White), and 6500K (Daylight).
- Operating Modes (3 Modes): Dusk to Dawn (D2D), Auto (Motion Mode), and On Time (Always On).
- Bewegungssensor: 150° wide-angle detection with an adjustable range of 1-40 ft.
- Verstellbare Köpfe: Dual adjustable light heads provide a 100° beam angle, allowing precise light direction.
- Haltbarkeit: IP65 waterproof rating, UV resistant, and cold resistant for all-weather performance.
- Sicherheit: Class II safety-rated, requiring no ground wire.
5. Einrichtung und Installation
This flood light is designed for hardwired installation. Ensure power is disconnected before proceeding.
- Strom ausschalten: Locate the circuit breaker controlling the light fixture and turn off the power.
- Verkabelung vorbereiten: If replacing an existing fixture, carefully remove it. Ensure the existing wires (Live and Neutral) are accessible.
- Montagehalterung installieren: Attach the provided mounting bracket to your standard 3" or 3.5" round junction box. Use the appropriate screws and anchors for your mounting surface (wall or soffit).
- Kabel anschließen: Use the yellow quick-connect terminals to securely connect the light's wires to your household wiring. Connect the white wire from the fixture to the neutral wire, and the black wire from the fixture to the live wire. This is a Class II fixture, so no ground wire connection is needed.
- Vorrichtung anbringen: Carefully align the flood light unit with the mounting bracket. Ensure the waterproof gasket is properly seated between the fixture and the mounting surface to prevent moisture ingress. Secure the fixture with the provided screws.
- Lichtköpfe einstellen: Loosen the wing nuts on the light heads to adjust their angle and direction as needed. Tighten the wing nuts to secure the position.
- Empfohlene Installationshöhe: For optimal sensor performance, install the light at a height of 6.56-9.84 feet (2-3 meters).
Image: Installation steps for the ALUSSO flood light.
Image: Soffit Mounted and Wall Mounted configurations.
6. Bedienungsanleitung
Your ALUSSO flood light offers adjustable settings for optimal performance.
6.1. Color Temperature (CCT) Adjustment
A dip switch located on the back of the light fixture allows you to select the desired color temperature:
Image: 3 CCT options: Warm White (3000K), Natural White (4000K), and Daylight (6500K).
- WW (Warmweiß): 3000
- NW (Natural White): 4000
- CW (Daylight): 6500
Note: Adjust the CCT switch before mounting the fixture for easier access.
6.2. Auswahl des Betriebsmodus
A dip switch on the back of the motion sensor unit allows you to select one of three operating modes:
Image: Three work modes of the ALUSSO flood light.
- D2D Mode (Dusk to Dawn): The light automatically turns on at sunset and turns off at sunrise. The motion sensor is inactive in this mode.
- AUTO-Modus (Bewegungsmodus): The light activates when motion is detected within its range. It turns off after a set duration if no further motion is detected.
- ON TIME Mode (Always On): The light is manually controlled via the wall switch. The motion sensor is disabled, and the light remains on until manually switched off.
6.3. Auto Mode Adjustments
When in AUTO Mode, three knobs on the bottom of the motion sensor allow for fine-tuning:
Image: Motion sensor with LUX, SENS, and TIME adjustment knobs.
- LUX (Helligkeitsempfindlichkeit): Adjusts the ambient light level at which the motion sensor becomes active. Turn towards the sun icon for day and night operation, or towards the moon icon for night-only operation (5-2000 LUX).
- SENS (Detection Range): Controls the sensitivity and detection distance of the motion sensor (1-40 ft).
- ZEIT (Dauer): Sets how long the light remains on after motion is detected and no further motion is sensed (10 seconds to 10 minutes).
Video: Official ALUSSO product video demonstrating features and modes.
7. Wartung
To ensure the longevity and optimal performance of your ALUSSO flood light, follow these maintenance guidelines:
- Reinigung: Reinigen Sie die Armatur regelmäßig mit einem weichen, fusselfreien Tuch.amp Mit einem Tuch abwischen. Verwenden Sie keine Scheuermittel oder Lösungsmittel, da diese die Oberfläche oder elektrische Bauteile beschädigen können.
- Inspektion: Überprüfen Sie die Leuchte regelmäßig auf Beschädigungen, lose Verbindungen oder Verschleiß. Beheben Sie etwaige Probleme umgehend.
- Sensorreinigung: Halten Sie die Linse des Bewegungssensors sauber und frei von Verunreinigungen (z. B. Schmutz, Spinnweben).webs) um eine genaue Erkennung zu gewährleisten.
Image: ALUSSO flood light is durable in all weather conditions.
8. Fehlerbehebung
Sollten Sie Probleme mit Ihrem Flutlicht haben, beachten Sie bitte die folgenden häufigen Probleme und Lösungen:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. | No power, incorrect wiring, mode setting. | Check circuit breaker. Verify wiring connections. Ensure correct operating mode is selected. |
| Bewegungssensor erkennt nicht. | Incorrect SENS/LUX settings, obstructions. | Adjust SENS to maximum. Adjust LUX towards sun icon. Clear any obstructions from sensor's view. |
| Licht bleibt dauerhaft an. | TIME setting too long, continuous motion, D2D mode selected. | Adjust TIME to a shorter duration. Ensure no constant motion in detection zone. Switch to AUTO mode if D2D is not desired. |
| Licht flackert. | Loose wiring, unstable power. | Check all wire connections for tightness. Consult an electrician if power supply is unstable. |
9. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Modellname | 30W Flood Lights Outdoor Motion Sensor |
| Teilenummer | WL-YDR-230P |
| Wastage | 30 Watt |
| Helligkeit | 3500 Lumen |
| Farbtemperatur | 3000K/4000K/6500K (einstellbar) |
| Bandtage | 120 Volt (Wechselstrom) |
| Bewegungserkennungswinkel | 150° |
| Bewegungserkennungsbereich | 1-40 ft (Adjustable) |
| Lichtdauer (Auto-Modus) | 10 seconds - 10 minutes (Adjustable) |
| Wasserbeständigkeit | IP65 Wasserdicht |
| Verwendung im Innen- und Außenbereich | Im Freien |
| Installationstyp | Hardwired, Wall Mount/Soffit Mount |
| Technische Daten | 9.45 Zoll L x 6.9 Zoll B x 5.12 Zoll H |
| Artikelgewicht | 1.52 Pfund (0.69 Kilogramm) |
| Durchschnittliches Leben | 30000 Stunden |
| Sicherheitsbewertung | ETL Listed, Class II (no ground wire required) |
10. Garantie und Support
ALUSSO provides a 3 Jahr Garantie for this product, as indicated on the packaging. Additionally, a 5-year manufacturer's coverage is offered, ensuring repair or replacement for any defects in materials or workmanship under normal use.
For any inquiries, technical support, or warranty claims, please contact ALUSSO customer service:
- E-Mail: service-support@alussolighting.com
- WebWebsite: www.alussolighting.com