wipro DG60740

Wipro Garnet 7W Wave Spot Gold COB LED Light User Manual

Modell: DG60740

1. Einleitung

This manual provides essential information for the safe installation, operation, and maintenance of your Wipro Garnet 7W Wave Spot Gold COB LED Light. Please read this manual thoroughly before installation and retain it for future reference.

2. Sicherheitshinweise

WARNUNG: Stromschlaggefahr. Die Installation darf nur von einem qualifizierten Elektriker durchgeführt werden.

  • Ensure power is disconnected at the main circuit breaker before installation, maintenance, or cleaning.
  • Nehmen Sie keine Veränderungen am Produkt vor. Jegliche Modifikationen können zum Erlöschen der Garantie führen und Sicherheitsrisiken bergen.
  • Dieses Produkt ist nur für den Gebrauch in Innenräumen bestimmt. Vor Feuchtigkeit und extremen Temperaturen schützen.
  • Sicherstellung der Versorgungsvoltage entspricht dem für das Produkt angegebenen Volumentage (220-240 V).
  • Verpackungsmaterialien außerhalb der Reichweite von Kindern aufbewahren.

3. Packungsinhalt

Prüfen Sie beim Öffnen der Verpackung, ob alle Komponenten vorhanden und unbeschädigt sind:

  • 1 x Wipro Garnet 7W Wave Spot Gold COB LED Light
  • 1 x LED Reflector (integrated)
Wipro Garnet 7W Wave Spot Gold COB LED Light and its packaging

Image 1: Wipro Garnet 7W Wave Spot Gold COB LED Light and its retail packaging.

4. Einrichtung und Installation

Befolgen Sie diese Schritte für eine ordnungsgemäße Installation. Eine Installation durch einen Fachmann wird empfohlen.

  1. Vorbereitung: Schalten Sie die Hauptstromversorgung des Installationsbereichs am Leitungsschutzschalter ab.
  2. Deckenöffnung: Create a suitable circular opening in the ceiling according to the product dimensions (refer to specifications for exact cutout size).
  3. Verdrahtung: Connect the light fixture's wires to the main electrical supply wires. Ensure correct polarity (Live to Live, Neutral to Neutral). Use appropriate connectors and ensure all connections are secure and insulated.
  4. Montage: Gently push the spring clips on the sides of the light fixture upwards and insert the fixture into the ceiling opening. The clips will spring back down to secure the light in place.
  5. Endkontrolle: Ensure the fixture is flush with the ceiling and securely mounted.
  6. Einschalten: Die Stromversorgung am Hauptleistungsschalter wiederherstellen.
Nahaufnahme view of the Wipro Garnet 7W Wave Spot Gold COB LED Light

Image 2: Close-up of the Wipro Garnet COB LED light, showing its design and mounting clips.

5. Bedienungsanleitung

The Wipro Garnet 7W Wave Spot Gold COB LED Light operates via a standard wall switch connected to its power supply. Once installed and wired correctly:

  • Toggle the connected wall switch to the 'ON' position to illuminate the light.
  • Toggle the connected wall switch to the 'OFF' position to turn off the light.

This light provides a neutral white (4000K) illumination with a sharp 36-degree beam angle, ideal for focused lighting in various indoor settings.

Wipro Garnet 7W Wave Spot Gold COB LED Light installed in a ceiling, showing its focused beam

Image 3: Wipro Garnet COB LED light installed in a ceiling, demonstrating its focused illumination.

6. Wartung

Regelmäßige Wartung gewährleistet optimale Leistung und Langlebigkeit Ihrer LED-Leuchte.

  • Reinigung: Vor der Reinigung sicherstellen, dass das Gerät ausgeschaltet ist. Verwenden Sie ein weiches, trockenes oder leicht angefeuchtetes Tuch.amp Verwenden Sie ein Tuch, um die Oberfläche der Leuchte abzuwischen. Verwenden Sie keine Scheuermittel, Lösungsmittel oder aggressive Chemikalien, da diese die Oberfläche oder die elektrischen Bauteile beschädigen können.
  • Lamp Ersatz: This product uses integrated LED technology. The LED light source is not user-replaceable. If the light source fails, the entire fixture should be replaced by a qualified professional.

7. Fehlerbehebung

If you encounter issues with your Wipro Garnet LED Light, refer to the following common solutions:

ProblemMögliche UrsacheLösung
Licht geht nicht an.Keine Stromversorgung; lose Verkabelung; defekter Schalter.Check circuit breaker; verify wiring connections (ensure power is off); test the switch. Consult a qualified electrician if unsure.
Licht flackert.Instabile Stromversorgung; lose Verbindung.Ensure stable power; check wiring connections (ensure power is off).
Das Licht ist schwach.Falsche Lautstärketage; product defect.Liefervolumen überprüfentage. Sollte das Problem weiterhin bestehen, wenden Sie sich bitte an den Kundendienst.

If troubleshooting steps do not resolve the issue, contact Wipro customer support.

8. Spezifikationen

BesonderheitDetail
MarkeWipro
ModellnummerDG60740
Wastage7 Watt
LichtquellentypLED (COB)
Helle FarbeNeutralweiß (4000K)
Abstrahlwinkel36 Grad
Bandtage220-240 Volt
Hohe Lautstärketage-SchutzBis zu 440V
ÜberspannungsschutzBis zu 4 KV
MaterialAcrylnitril-Butadien-Styrol
Technische Daten5.2L x 8.8B x 8.8H Zentimeter
Artikelgewicht160 Gramm
Verwendung im Innen- und AußenbereichInnenbereich
MontagetypDeckenmontage
UrsprungslandIndien
Diagram illustrating voltage spike protection, surge protection, and energy efficiency features of the Wipro Garnet COB LED light

Image 4: Key protection and efficiency features of the Wipro Garnet COB LED light.

9. Garantie und Support

Wipro products are designed for durability and performance. For warranty information or technical support, please contact Wipro customer care.

  • Hersteller: Wipro Enterprises Pvt Ltd
  • Gebührenfreie Nummer: 1800-425-1969
  • E-Mail: feedback.wcc@wipro.com
  • Adresse: #8, Wipro House, 80 Feet Rd, Koramangala 1A Block, 1st Block Koramangala, Koramangala, Bengaluru, Karnataka 560034, India

Bitte bewahren Sie Ihren Kaufbeleg als Kaufnachweis für Garantieansprüche auf.