1. Sicherheitshinweise
Please read all instructions carefully before assembly and use. Keep this manual for future reference. Failure to follow these instructions may result in injury or damage to the product.
- Vor Beginn der Montage sicherstellen, dass alle Teile vorhanden und unbeschädigt sind.
- Bauen Sie das Bett auf einer weichen, sauberen Oberfläche auf, um Kratzer zu vermeiden.
- Die Schrauben dürfen beim Zusammenbau nicht zu fest angezogen werden.
- Halten Sie Kinder und Haustiere vom Versammlungsbereich fern.
- Always use two people for assembly and when operating the hydraulic lift mechanism.
- Do not place hands or fingers near moving parts of the hydraulic system.
- Ensure the mattress is properly seated before operating the hydraulic lift.
2. Packungsinhalt
The Polibi King Size Upholstered Platform Bed is delivered in multiple packages. Verify that all components listed below are present.
- Headboard (Vertical Stripe Design)
- Bettgestell-Seitenteile
- Bettgestell-Endleisten
- Hydraulic Lift Mechanisms (2 sets for King size)
- Bed Slats (12+12 for King size)
- Mittlerer Stützbalken und Beine
- Hardware-Set (Schrauben, Bolzen, Unterlegscheiben, Inbusschlüssel)
- Montageanleitung
3. Montageanleitung
Assembly requires two adults. Follow the steps carefully. A detailed manual with diagrams is included in your package.
3.1 Auspacken und Vorbereitung
- Schaffen Sie ausreichend Platz für die Versammlung.
- Unpack all boxes and lay out components on a soft surface to prevent damage.
- Prüfen Sie anhand der Packungsinhaltsliste, ob alle Teile vorhanden sind.
3.2 Rahmenmontage
- Attach the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure but do not fully tighten yet.
- Install the center support beam and its legs. Adjust the leg height to ensure even support.
- For King size beds, two twin-sized platform bases are combined. Assemble each twin base frame separately following the instructions.
Abbildung 1: Explosionsdarstellung view showing the main components of the King Size Upholstered Platform Bed, including the vertical stripe headboard, hydraulic lift mechanism, and bed slats.
3.3 Hydraulic Lift Mechanism and Slat Installation
- Carefully attach the hydraulic lift mechanisms to the bed frame according to the detailed manual. Pay close attention to the orientation.
- Install the bed slats onto the frame. Ensure they are evenly spaced and securely fastened.
- Sobald alle Komponenten an ihrem Platz sind, ziehen Sie alle Schrauben und Bolzen fest an.
Figure 2: The King Size bed is formed by combining two Twin Size platform bed frames, each with its own headboard and storage system.
4. Operating the Hydraulic Storage System
The bed features a hydraulic lift mechanism for easy access to under-bed storage. Always operate with care.
4.1 Lifting the Bed Frame
- Remove any heavy items from the mattress surface.
- Stand at the foot or side of the bed.
- Firmly grasp the lifting handle or edge of the bed frame.
- With a steady motion, lift the bed frame upwards. The hydraulic pistons will assist in raising and holding the frame in the open position.
- Ensure the frame is fully extended and stable before accessing the storage area.
Figure 3: The innovative hydraulic lift system provides easy access to generous under-bed storage, ideal for stowing bedding, clothes, or seasonal items.
4.2 Lowering the Bed Frame
- Ensure no obstructions are in the storage area that could prevent the frame from closing completely.
- Grasp the lifting handle or edge of the bed frame.
- Gently pull the frame downwards. You may need to apply some downward pressure to overcome the hydraulic resistance.
- Lower the frame slowly and evenly until it rests securely on the bed base.
Figure 4: The hydraulic storage system underneath the mattress is ideal for maximizing room storage potential.
5. Wartung
Regular maintenance helps prolong the life of your bed.
5.1 Reinigung
- Polster: For general cleaning, vacuum the fabric regularly using an upholstery attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, consult a professional upholstery cleaner or use a mild fabric cleaner suitable for linen, testing on an inconspicuous area first.
- Rahmen: Wischen Sie das Bettgestell mit einem weichen, fusselfreien Tuch ab.amp Tuch. Vermeiden Sie aggressive Chemikalien oder Scheuermittel.
5.2 Hardware Check
- Überprüfen Sie regelmäßig alle Schrauben und Bolzen, um sicherzustellen, dass sie fest sitzen. Ziehen Sie sie gegebenenfalls nach, um die Stabilität zu gewährleisten.
5.3 Hydrauliksystem
- Inspect the hydraulic pistons for any signs of leakage or damage. If any issues are observed, contact customer support.
- Do not attempt to lubricate or disassemble the hydraulic pistons yourself.
6. Fehlerbehebung
In diesem Abschnitt finden Sie häufig auftretende Probleme und deren Lösungen.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Das Bettgestell wackelt oder quietscht. | Lose Beschläge. Unebener Boden. | Prüfen und ziehen Sie alle Schrauben und Muttern fest. Stellen Sie sicher, dass das Bett auf einer ebenen Fläche steht. |
| Hydraulic lift is difficult to raise or lower. | Too much weight on the mattress. Obstruction in storage. Hydraulic pistons not fully engaged. | Remove excess weight from the mattress. Clear any items obstructing the mechanism. Ensure the mattress is correctly positioned. If issues persist, contact customer support. |
| Bed frame does not close completely. | Items in storage are too tall. | Rearrange or remove items from the storage compartment to allow the frame to close fully. |
7. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Größe | König |
| Material | Holzwerkstoff, Leinen |
| Produktabmessungen (L x B x H) | 76" x 78" x 43.3" |
| Stil | Modern |
| Besonderheit | Hydraulic Lift Mechanism, Under-Bed Storage |
| Kompatible Matratzengröße | König |
| Erforderliche Montage | Ja |
| Farbe | Grau |
Figure 5: Overall product dimensions for the King Size bed.
Figure 6: Weight capacity information for Twin (330 lbs) and King (660 lbs) bed sizes.
8. Garantieinformationen
For specific warranty details regarding your Polibi King Size Upholstered Platform Bed, please refer to the warranty card included in your package or contact Polibi customer service directly. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
9. Kundendienst
If you have any questions, require assistance with assembly, or encounter any issues not covered in this manual, please contact Polibi customer support. Have your product model and purchase date ready when contacting support.
Polibi Customer Service: Please refer to the contact information provided in your product packaging or visit the official Polibi webSite für Supportoptionen.