1. Einleitung
This manual provides instructions for the Keychron K10 Version 2 QMK Wireless Mechanical Gaming Keyboard. The K10 Version 2 is a full-size, hot-swappable mechanical keyboard designed for both Mac and Windows users, offering wireless Bluetooth and wired USB-C connectivity, RGB backlighting, and QMK firmware for extensive customization.
Figure 1.1: Keychron K10 Version 2 Mechanical Keyboard.
2. Einrichtung
2.1 Auspacken und Packungsinhalt
Carefully remove the keyboard and all accessories from the packaging. The package should include the Keychron K10 Version 2 keyboard, a USB-C to USB-A cable, a keycap puller, a switch puller, and a user manual.
2.2 Kabelverbindung
- Verbinden Sie das USB-C-Ende des mitgelieferten Kabels mit dem USB-C-Anschluss der Tastatur.
- Verbinden Sie das USB-A-Ende des Kabels mit einem freien USB-Anschluss an Ihrem Computer.
- Ensure the keyboard's mode switch (located on the back or side) is set to 'Cable' or 'Wired' mode.
- Die Tastatur wird von Ihrem Betriebssystem automatisch erkannt.
2.3 Drahtlose Bluetooth-Verbindung
- Ensure the keyboard's mode switch is set to 'Bluetooth' or 'Wireless' mode.
- To enter pairing mode, press and hold the 'Fn' + '1' (or 'Fn' + '2' or 'Fn' + '3') key combination for 4 seconds until the '1' (or '2' or '3') key backlight flashes rapidly. This indicates the keyboard is ready to pair.
- Öffnen Sie auf Ihrem Computer oder Gerät die Bluetooth-Einstellungen und suchen Sie nach neuen Geräten.
- Select 'Keychron K10 V2' from the list of available devices.
- If prompted, enter the pairing code displayed on your screen using the keyboard and press 'Enter'.
- The '1' (or '2' or '3') key backlight will stop flashing and remain solid, indicating successful pairing.
- The keyboard supports connecting up to 3 devices. Use 'Fn' + '1', 'Fn' + '2', or 'Fn' + '3' to switch between paired devices.
Figure 2.1: Multi-device Bluetooth connectivity.
2.4 Betriebssystemumschaltung
The K10 Version 2 keyboard has a switch to select between Mac and Windows layouts. Locate the OS switch on the back or side of the keyboard and set it to your desired operating system. This ensures correct key mapping for function keys and modifier keys.
Figure 2.2: Mac and Windows layout indicators.
2.5 verstellbare Füße
The keyboard features two levels of adjustable feet, allowing you to set the typing angle to 7.7° or 11° for ergonomic comfort. Adjust the feet to your preferred typing position.
Figure 2.3: Adjustable keyboard feet for ergonomic support.
3. Bedienung der Tastatur
3.1 Key Functions and Customization (QMK)
The Keychron K10 Version 2 supports QMK firmware, enabling extensive key remapping, macro creation, and custom shortcuts. You can customize each key using the Keychron Launcher web Anwendung.
- Funktionstasten: Use the 'Fn' key in combination with F1-F12 for multimedia controls and other system functions.
- QMK Customization: Access the Keychron Launcher web app (refer to Keychron's official website for the link) to remap keys, create macros, and configure layers.
Figure 3.1: Keychron Launcher web app for QMK customization.
3.2 Backlight Control (RGB)
The keyboard features RGB backlighting. Use the dedicated backlight key (usually located above the number pad or near the F-keys) to cycle through different lighting effects. Use 'Fn' + arrow keys or other designated key combinations to adjust brightness and color.
Figure 3.2: RGB Backlighting in operation.
3.3 Hot-Swap-fähige Schalter
The K10 Version 2 is hot-swappable, allowing you to change mechanical switches without soldering. This feature supports most 3-pin and 5-pin MX mechanical switches.
- Schalter entfernen: Verwenden Sie den mitgelieferten Schalterabzieher, um die oberen und unteren Halteklammern des Schalters vorsichtig zu greifen und ihn gerade nach oben zu ziehen.
- Installation von Schaltern: Richten Sie die Pins des neuen Schalters an den Löchern auf der Platine aus. Drücken Sie den Schalter vorsichtig nach unten, bis er einrastet. Achten Sie darauf, dass die Pins nicht verbogen sind.
Abbildung 3.3: Hot-Swap-fähiger Schaltermechanismus.
4. Wartung
4.1 Reinigung der Tastatur
Regular cleaning helps maintain keyboard performance and appearance.
- Allgemeine Reinigung: Mit einem weichen, fusselfreien Tuch leichtampened with water or a mild cleaning solution to wipe the keycaps and case. Avoid excessive moisture.
- Gründliche Reinigung: For thorough cleaning, remove keycaps using the keycap puller. Use compressed air to remove dust and debris from between the switches. Clean individual keycaps with a mild soap solution, rinse, and dry completely before reattaching.
4.2 Batteriepflege
The K10 Version 2 features a 4000mAh battery. To prolong battery life:
- Vermeiden Sie häufiges vollständiges Entladen des Akkus.
- Bewahren Sie die Tastatur an einem kühlen, trockenen Ort auf, wenn sie längere Zeit nicht benutzt wird.
- Laden Sie die Tastatur mit dem mitgelieferten USB-C-Kabel an einer Standard-USB-Stromquelle auf.
5. Fehlerbehebung
5.1 Verbindungsprobleme
- Bluetooth stellt keine Verbindung her: Ensure the keyboard is in Bluetooth mode and in pairing mode (Fn + 1/2/3 for 4 seconds). Check your device's Bluetooth settings. Try forgetting the device and re-pairing.
- Kabelverbindung funktioniert nicht: Ensure the cable is securely connected to both the keyboard and the computer. Verify the keyboard is in wired mode. Try a different USB port or cable.
5.2 Tasten reagieren nicht
- Einzelschlüssel: If a single key is not responding, carefully remove the keycap and then the switch using the switch puller. Inspect the switch pins for bends or damage. Reinsert the switch firmly, ensuring proper alignment.
- Multiple keys: Ensure the keyboard is properly connected (wired or wireless). Check the OS switch setting. If the issue persists, a firmware reset or update may be necessary.
5.3 Probleme mit der Hintergrundbeleuchtung
- Hintergrundbeleuchtung aus: Press the backlight key to cycle through effects. Adjust brightness using 'Fn' + arrow keys. Ensure the battery has sufficient charge if in wireless mode.
- Uneinheitliche Beleuchtung: This could indicate a software issue or a faulty LED. Try resetting the keyboard or updating firmware.
5.4 Firmware-Updates
Keychron periodically releases firmware updates to improve performance and add features. Visit the official Keychron website for the latest firmware and instructions on how to update your K10 Version 2 keyboard.
6. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Marke | Schlüsselchron |
| Modellname | K10X-H1 |
| Konnektivitätstechnologie | USB-C, Bluetooth 5.1 |
| Tastaturbeschreibung | Ergonomic, Full Size |
| Empfohlene Verwendung | Gaming, Büro |
| Besondere Merkmale | Backlit (RGB), Hot-Swappable, Hotkeys and Media Keys, Programmable Keys (QMK) |
| Farbe | Red Switch (variant) |
| Material | Plastik |
| Im Lieferumfang enthaltene Komponenten | Keyboard, Mouse (Note: Mouse is typically not included with keyboard, check package contents) |
| Stromquelle | Wired and Wireless (4000mAh battery) |
| Schaltertyp | Linear (Super Red Mechanical Switches) |
| Tastaturlayout | QWERTY (104 Tasten) |
| Kompatibles Betriebssystem | Mac, Windows |
| Hersteller | Schlüsselchron |
7. Garantie und Support
7.1 Garantieinformationen
Keychron products typically come with a limited manufacturer's warranty. The duration and terms of the warranty may vary by region and retailer. Please refer to the warranty card included with your product or visit the official Keychron webWebsite für detaillierte Garantieinformationen.
7.2 Kundendienst
For technical assistance, troubleshooting, or general inquiries, please contact Keychron customer support through their official website. You can usually find contact information, FAQs, and support resources on the 'Support' or 'Contact Us' section of the Keychron webWebsite.
Offiziell WebWebsite: www.keychron.com