INNOKIN Arcfire
INNOKIN Arcfire Vape Kit Benutzerhandbuch
Effortless Vaping, Superior Experience
1. Introduction to the INNOKIN Arcfire Vape Kit
The INNOKIN Arcfire Vape Kit is designed for effortless and satisfying vaping. Featuring a sleek, precision-machined design with magnetic snap-in pods and a user-friendly one-button operation, it is suitable for both beginners and experienced users. The Arcfire delivers smooth, flavourful Mouth-to-Lung (MTL) hits, powered by fast-heating mesh coils. Its 650mAh battery with an intuitive LED indicator ensures reliable performance throughout your day. The device is refillable and rechargeable, offering a convenient and stylish vaping solution.

Image 1.1: The INNOKIN Arcfire Vape Kit, showcasing its sleek design in Ocean Horizon.
2. Packungsinhalt
Please verify that all items are present in your INNOKIN Arcfire Vape Kit package:
- 1 x INNOKIN Arcfire Device
- 1 x INNOKIN Arcfire 1.2 Ohm Refillable Pod (pre-installed or included separately)
- 1 x USB-C Ladekabel
- 1 x Benutzerhandbuch (dieses Dokument)

Bild 2.1: Überview of Arcfire features, highlighting the 650mAh battery and Arc-Coil Mesh.
3. Installationsanleitung
3.1. Erstes Aufladen
Before first use, fully charge your Arcfire device. Connect the provided USB-C charging cable to the charging port located at the bottom of the device and plug the other end into a suitable USB power source (e.g., computer USB port, wall adapter). The LED indicator will show charging status.
- Ladeanzeige: The LED indicator lights will illuminate progressively as the device charges.
- Volle Ladung: All LED lights will remain solid when charging is complete.
- The Arcfire supports quick charging, reaching approximately 75% battery capacity in just 30 minutes.

Image 3.1: Visual representation of the Arcfire's three-stage battery indicator system.
3.2. Befüllen der Kapsel
The Arcfire uses refillable pods with a convenient side-fill port. Ensure the pod is detached from the device before filling.
- Remove the pod from the Arcfire device by gently pulling it upwards.
- Locate the silicone stopper on the side of the pod.
- Heben Sie den Silikonstopfen vorsichtig an, um die Einfüllöffnung freizulegen.
- Führen Sie die Düse Ihrer E-Liquid-Flasche in die Einfüllöffnung ein und befüllen Sie den Pod langsam. Vermeiden Sie ein Überfüllen.
- Securely close the silicone stopper to prevent leaks.
- For first-time filling or with a new coil, allow the e-liquid to saturate the coil for at least 5 minutes before vaping to prevent dry hits.
The Arcfire is compatible with 50% PG or higher e-liquids, including nic salts and freebase e-liquids.

Abbildung 3.2: Detailansicht view of the Arcfire pod and its internal coil structure, emphasizing the Arc-Coil technology.
3.3. Inserting the Pod
Once filled, insert the pod back into the Arcfire device. The magnetic connection will securely hold the pod in place.
- Align the filled pod with the pod slot on the device.
- Gently push the pod down until you feel the magnetic connection snap into place.
4. Bedienungsanleitung
4.1. Ein-/Ausschalten
The Arcfire features a simple one-button operation:
- So schalten Sie das Gerät ein: Press the fire button 5 times rapidly. The LED indicator will flash to confirm activation.
- So schalten Sie das Gerät aus: Press the fire button 5 times rapidly. The LED indicator will flash to confirm deactivation.
4.2. Dampfen
The Arcfire supports both inhale (auto-draw) and button activation for vaping.
- Inhale Activation: Simply draw on the mouthpiece to activate the device and produce vapor.
- Tastenaktivierung: Press and hold the fire button while drawing on the mouthpiece to produce vapor.
Release the button or stop inhaling when you have finished your puff.
4.3. Batteriestandsanzeige
The LED indicator lights on the device provide a clear indication of the remaining battery life:
- Drei Lichter: 100 % – 65 % verbleibender Akku
- Zwei Lichter: 65 % – 15 % verbleibender Akku
- Ein Licht: Weniger als 15 % Akku übrig (bald aufladen)
When the battery is critically low, the single light may flash, indicating that charging is required immediately.
5. Wartung
5.1. Reinigen Ihres Geräts
Regular cleaning helps maintain optimal performance and extends the lifespan of your Arcfire kit.
- Gerätekörper: Wipe the device body with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Pod Connection: Periodically clean the magnetic connection points on both the device and the bottom of the pod with a cotton swab lightly dampened with isopropyl alcohol to remove any e-liquid residue or dust. Ensure the area is completely dry before reattaching the pod.
- Ladeanschluss: Keep the USB-C charging port free of debris. Use a dry, soft brush or compressed air if necessary.
5.2. Pod-Austausch
The Arcfire pods contain integrated coils that will eventually need replacement. You will notice a decrease in flavor, vapor production, or a burnt taste when the coil is nearing the end of its life.
- To replace a pod, simply pull the old pod out of the device.
- Entsorgen Sie die alte Kapsel verantwortungsvoll.
- Insert a new, filled pod into the device as described in Section 3.3.

Image 5.1: Illustration of the various Arcfire pod options, including different resistances and capacities.
5.3. Bewährte Verfahren zur Gebührenberechnung
- Always use the provided USB-C cable or a high-quality, compatible cable.
- Avoid charging the device overnight or leaving it unattended for extended periods.
- Charge the device on a clean, non-flammable surface.
6. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Keine Dampfproduktion |
|
|
| Verbrannter Geschmack |
|
|
| Aus der Kapsel tritt Flüssigkeit aus |
|
|
| Gerät lädt nicht |
|
|
7. Spezifikationen
| Produktname | INNOKIN Arcfire Vape Kit |
| Batteriekapazität | 650 mAh (intern) |
| Pod-Kapazität | 2 ml |
| Spulentyp | Integrated Mesh Coil (e.g., 1.2 Ohm) |
| Aktivierungsmethode | Inhale & Button Activated |
| Ladeanschluss | USB Typ C |
| Maße | Ca. 7 x 4 x 2 cm (Verpackungsabmessungen) |
| Gewicht | Approx. 100 g (Package Weight) |
| E-liquid Compatibility | 50% PG or higher (including Nic Salts) |

Image 7.1: The Arcfire device showcasing its sleek design and range of available colors.
8. Garantie und Support
For warranty information and customer support, please refer to the warranty card included in your product packaging or visit the official INNOKIN webBewahren Sie Ihren Kaufbeleg für eventuelle Garantieansprüche auf.
If you encounter any issues not covered in this manual, please contact INNOKIN customer support through their official channels. Do not attempt to repair the device yourself, as this may void your warranty.
Wichtiger Sicherheitshinweis: This product is intended for adult smokers and vapers. Keep out of reach of children and pets. If the product is used with nicotine-containing e-liquid, please be aware that nicotine is a highly addictive substance.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.