1. Einführung und Endeview
The Redodo 2000W Pure Sine Wave Inverter is designed to efficiently convert 12V DC power from your battery into stable 120V AC power, suitable for a wide range of electronic devices and home appliances. With a continuous output of 2000W and a peak surge power of 4000W, this inverter ensures reliable and low-interference power output, with a distortion rate of less than 4%. It is an ideal solution for vehicles, RVs, homes, and outdoor activities.
This inverter features a real-time LCD monitor for easy operational status tracking, multiple protection systems for safe use, and flexible installation options.
2. Produktmerkmale
- Reliable Power Efficiency: Converts 12V DC to 120V AC with 2000W continuous power and 4000W peak surge. Provides stable, low-interference pure sine wave output (≤ 4% distortion).
- Real-Time LCD Monitor: Zeigt die Batteriekapazität antage, remaining capacity, DC input voltage, AC-Ausgangsvoltage, output power, and load ratio. Includes over-voltage, geringe Lautstärketage, high temperature, and overload indications for easy troubleshooting.
- Einfache Installation: Accepts battery voltage from 10.0V to 15.5V DC, compatible with various battery types, especially Redodo 12V LiFePO4 batteries. Can be installed vertically or horizontally.
- Vielseitig einsetzbar: Operates within a temperature range of -20 °C to 40 °C. Suitable for camping, traveling, off-grid setups, RVs, and indoor equipment.
- Multi-Schutzsystem: Beinhaltet niedrige Lautstärketage protection, overheating protection, overvoltage protection, overload protection, and short circuit protection.
- Konnektivität: Equipped with 4 AC power sockets, Type-C/USB interface, and a remote controller port.
3. Einrichtung und Installation
Before installation, ensure the inverter is placed in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials. The inverter can be mounted vertically or horizontally.
3.1 Physische Installation
Use the provided 4 mounting screws and plastic anchors to secure the inverter in your desired location. Ensure sufficient space around the unit for proper airflow and cooling.
Figure 3.1: Inverter dimensions and recommended horizontal installation. Dimensions are 354mm length, 100mm width, and 188mm height.
3.2 Batterieanschluss
Connect the inverter to a 12V DC battery bank. Use the provided 2*(2*8AWG) 1.97FT Battery to Inverter M8 ring terminal cables. Always connect the positive (+) cable (red) first, then the negative (-) cable (black). Ensure all connections are tight to prevent overheating and ensure optimal performance.
Figure 3.2: Diagram showing the connection of the Redodo inverter within a battery system, including solar panels and a charge controller.
3.3 Fernbedienungsanschluss
The remote controller allows for convenient monitoring and control of the inverter from a distance. Connect the remote cable to the designated remote port on the inverter.
Figure 3.3: Close-up of the inverter's LCD screen and the remote controller, showing various status indicators.
4. Bedienungsanleitung
4.1 Ein-/Ausschalten
Once all connections are secure, press the ON/OFF switch on the inverter or the remote controller to power on the unit. The LCD screen will illuminate, displaying operational data. To power off, press the ON/OFF switch again.
4.2 Monitoring Operational Status
Der LCD-Bildschirm liefert Echtzeitinformationen:
- DC-Eingangsvoltage: Aktuelle Lautstärketage von der Batterie.
- Temperatur: Innentemperatur des Wechselrichters.
- Batterieleistung: Remaining capacity of the battery bank.
- Frequenz: Ausgangswechselfrequenz (60 Hz).
- AC-Ausgangsvolumentage: Bandtage supplied to AC appliances (120V).
- Ausgangsleistung: Current power consumption by connected devices.
- Lastverhältnis: Prozenttage of maximum load being used.
- Fehlercode: Displays specific codes for protection events (e.g., low voltage, high temperature, overload).
Figure 4.1: The LCD screen interface showing real-time input voltage and output power status, along with various indicators.
4.3 Anschluss von Wechselstromgeräten
Plug your 120V AC appliances into the 4 AC outlets on the inverter. Ensure the total continuous wattage of your appliances does not exceed 2000W to prevent overloading.
Abbildung 4.2: Bspamples of household appliances that can be powered by the Redodo 2000W inverter, including microwave oven, coffee machine, fridge, hair dryer, and kettle.
5. Wartung
To ensure the longevity and optimal performance of your Redodo 2000W Pure Sine Wave Inverter, regular maintenance is recommended:
- Sauber halten: Periodically clean the exterior of the inverter and ensure the cooling vents are free from dust and debris.
- Verbindungen prüfen: Überprüfen Sie regelmäßig alle Gleich- und Wechselstromanschlüsse, um sicherzustellen, dass sie fest sitzen und frei von Korrosion sind.
- Belüftung: Always ensure the inverter has adequate ventilation to prevent overheating. The efficient cooling system with dual fans helps maintain stable temperatures.
- Lagerung: Wenn Sie den Wechselrichter über einen längeren Zeitraum lagern, trennen Sie ihn von der Batterie und lagern Sie ihn an einem kühlen, trockenen Ort.
Figure 5.1: Illustration of the inverter's efficient cooling system with dual fans, designed to maintain stable temperatures between -20°C and 40°C.
6. Fehlerbehebung
The inverter is equipped with a multi-protection system that will indicate issues via the LCD screen. Refer to the screen for specific error codes.
- Niedrige Lautstärketage Schutz: Wenn die BatterieladungtagSinkt die Spannung zu stark, schaltet sich der Wechselrichter zum Schutz der Batterie ab. Laden Sie die Batterie auf oder tauschen Sie sie aus.
- Überhitzungsschutz: If the internal temperature exceeds safe limits, the inverter will shut down. Ensure proper ventilation and reduce load.
- Übervolumentage Schutz: Wenn die Eingangslautstärketage is too high, the inverter will shut down. Verify battery voltage.
- Überlastschutz: If the connected load exceeds the inverter's capacity, it will shut down. Reduce the connected load.
- Kurzschlussschutz: In case of a short circuit in the output, the inverter will shut down. Disconnect all loads and check for faults.
Figure 6.1: Visual representation of the inverter's multi-protection features, including low voltage, overheating, overvoltage, Überlast- und Kurzschlussschutz.
7. Spezifikationen
| Spezifikation | Wert |
|---|---|
| Technische Daten | 12.68 x 3.93 x 7.42 Zoll |
| Artikelgewicht | 12.07 Pfund |
| Artikelmodellnummer | 2000 Watt |
| Marke | Redodo |
| Hersteller | Redodo |
| Empfohlene Verwendung für das Produkt | Heim |
| Stromquelle | Solar- und batteriebetrieben |
| Wastage | 2000 Watt |
| Batteriekapazität | 100 Amp Std |
8. Garantie und Support
Redodo provides considerate, user-oriented service and technical support. For any issues or inquiries, please contact Redodo customer service. A team of knowledgeable tech staff is ready to help you tackle all problems and provide support within 24 hours.
Schutzpläne können separat erworben werden:
- 2-Jahres-Schutzplan
- 3-Jahres-Schutzplan
- Komplettschutz: Ein Plan deckt alle berechtigten vergangenen und zukünftigen Käufe ab.
