SPC Performance 67405 Verstellbarer hinterer Spurstangenarm – Bedienungsanleitung

1. Produktüberschreitungview

The SPC Performance 67405 Adjustable Rear Toe Control Arm is designed to restore and provide full toe adjustment capabilities for the rear suspension of specific Ford Explorer vehicles. Many of these vehicles have been subject to recalls due to corrosion issues, which can lead to the removal of factory toe adjustability. This control arm allows for precise alignment settings, which is crucial for preventing premature tire wear and ensuring proper vehicle handling.

Hauptmerkmale:

• Kompatibilität: Specifically designed for Ford Explorer vehicles affected by corrosion recalls that removed rear toe adjustability.
• Wiederherstellung: Fully adjustable design restores the complete adjustment range for proper alignment settings.
• Tire Protection: Enables correct toe alignment adjustment to help prevent premature tire wear after recall service.
• Vielseitigkeit: Can be used in conjunction with SPC PN# 84130 for additional rear camber adjustment, if required.

2. Packungsinhalt

Bitte überprüfen Sie vor Beginn der Installation, ob alle Teile vorhanden sind:

• 1 x SPC Performance 67405 Adjustable Rear Toe Control Arm
• Installation Hardware (as supplied by manufacturer)

Note: This product is sold individually per control arm. Two units are required for complete vehicle service (one for each side of the vehicle).

3. Wichtige Sicherheitshinweise

Automotive suspension work requires specialized tools and knowledge. Improper installation can lead to vehicle damage, loss of control, and serious injury. It is highly recommended that installation be performed by a qualified automotive technician.

• Tragen Sie stets geeignete persönliche Schutzausrüstung (PSA), einschließlich Schutzbrille und Handschuhe.
• Ensure the vehicle is securely supported on a lift or jack stands on a level surface before beginning any work. Never rely solely on a jack.
• Trennen Sie gegebenenfalls die Fahrzeugbatterie ab, bevor Sie an elektrischen Bauteilen arbeiten.
• Die genauen Drehmomentvorgaben und Vorgehensweisen entnehmen Sie bitte dem Servicehandbuch des Fahrzeugherstellers.
• Halten Sie Kinder und Haustiere vom Arbeitsbereich fern.

4. Installationsanleitung

This guide provides general instructions. Always consult a professional service manual for your specific Ford Explorer model for detailed steps and torque specifications.

4.1. Schritte vor der Installation

1. Parken Sie das Fahrzeug auf einer ebenen Fläche und ziehen Sie die Feststellbremse an.
2. Lösen Sie die Radmuttern an den Hinterrädern.
3. Safely lift the rear of the vehicle using a hydraulic lift or jack and secure it with jack stands.
4. Entfernen Sie die Hinterräder.
5. Locate the existing rear toe control arm.

4.2. Removal of Existing Control Arm

1. Carefully remove the bolts securing the existing rear toe control arm to the vehicle's subframe and the knuckle assembly.
2. Retain all hardware for potential reuse or comparison with new hardware.
3. Remove the old control arm.

4.3. Installation of SPC 67405 Control Arm

1. Compare the new SPC 67405 control arm with the old unit to ensure it is the correct replacement.
2. Install the SPC 67405 control arm into the vehicle's subframe and knuckle assembly using the provided or appropriate hardware. Do not fully tighten bolts at this stage.
3. Adjust the length of the control arm to approximately match the length of the removed factory arm. This will provide a starting point for alignment.
4. Once the vehicle is at ride height (wheels on the ground or suspension loaded), fully tighten all mounting bolts to the vehicle manufacturer's specified torque values. This is critical to prevent premature bushing wear and ensure proper function.

4.4. Nach der Installation

• Reinstall the rear wheels and tighten lug nuts to manufacturer specifications.
• Das Fahrzeug vorsichtig absenken.
• Immediately after installation, a professional wheel alignment is mandatory. The adjustable nature of this control arm requires precise adjustment to achieve correct toe settings and prevent tire wear.

5. Wartung

To ensure the longevity and proper function of your SPC Performance 67405 Adjustable Rear Toe Control Arm, periodic inspection is recommended:

• Sichtprüfung: Regularly inspect the control arm, bushings, and ball joint for any signs of wear, damage, or corrosion.
• Anzugsdrehmoment der Befestigungselemente: Periodically check the torque of all mounting bolts to ensure they remain at the manufacturer's specified values. Loose fasteners can lead to noise, premature wear, and alignment issues.
• Ausrichtungsprüfungen: If you notice uneven tire wear or changes in vehicle handling, have a professional alignment shop check and adjust the rear toe settings.

6. Fehlerbehebung

If you experience issues after installing the SPC Performance 67405 control arm, consider the following:

• Ungleichmäßiger Reifenverschleiß: This is typically a symptom of incorrect wheel alignment. Ensure a professional alignment has been performed after installation.
• Ungewöhnliche Geräusche (Klappern, Quietschen):
  • Prüfen Sie, ob alle Befestigungsschrauben das richtige Drehmoment aufweisen.
  • Inspect bushings and ball joint for damage or improper seating.
  • Ensure no components are contacting other parts of the suspension or chassis.
• Vehicle Pulling/Poor Handling: This indicates an alignment issue. Re-check alignment settings with a qualified technician.

If problems persist, consult a qualified automotive technician or contact SPC Performance customer support.

7. Produktspezifikationen

8. Garantie und Support

For specific warranty information regarding the SPC Performance 67405 Adjustable Rear Toe Control Arm, please refer to the documentation included with your purchase or visit the official SPC Performance webDie Garantiebedingungen können je nach Website variieren.

For technical support, installation assistance, or any product-related inquiries, please contact SPC Performance customer service directly. Contact information can typically be found on their official webStandort oder Produktverpackung.