Andeman 4000A Jump Starter (Model EP-166) User Manual

1. Einleitung

Thank you for choosing the Andeman 4000A Jump Starter, Model EP-166. This device is designed to provide reliable power for jump-starting vehicles and charging electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.

1.1. Lieferumfang

• Epower-166 Jump Starter Unit x1
• Smart Klamps x1
• Typ-C-Ladekabel x1
• Benutzerhandbuch x1
• Aufbewahrungsbox x1

Image: All components included in the Andeman Jump Starter package, laid out for clear visibility.

2. Sicherheitsvorkehrungen

Your safety is paramount. This device incorporates advanced safety features, but proper handling is crucial. The Andeman EP-166 is UL Certified, ensuring it meets stringent safety standards.

2.1. Integrated Safety Protections

The intelligent safety terminals feature 10 advanced protections:

• Überlastschutz
• Funkenschutz
• Reverse-Charge-Schutz
• Verpolschutz
• Überstromschutz
• Schutz vor niedrigen Temperaturen
• Überladeschutz
• Kurzschlussschutz
• Über Voltage-Schutz
• Hochtemperaturschutz

Abbildung: Ein interner view highlighting the 10 advanced safety protections integrated into the Andeman Jump Starter for secure operation.

2.2. Umweltaspekte

• Temperaturbereich: The device is engineered to operate in extreme temperatures, from -20°C (-4°F) to 60°C (140°F).
• Wasserdichtigkeit: With an IP65 waterproof rating, the unit is resistant to rain and splashes. Avoid submerging the device in water.
• Haltbarkeit: The design is drop-proof and sand-proof for enhanced durability in various environments.

3. Einrichtung

3.1. Aufladen des Starthilfekabels

Before initial use, fully charge the jump starter. It features Type-C 3.0A Quick Charging technology, allowing a full charge from 0% to 100% in approximately 1.8 hours. Each complete charge provides up to 80 jump-starts.

• Connect the provided Type-C charging cable to the jump starter's input port.
• Verbinden Sie das andere Ende des Kabels mit einem geeigneten USB-Netzteil (nicht im Lieferumfang enthalten).
• Die LED-Anzeige zeigt den Ladefortschritt an.

Image: The jump starter being fast-charged via its Type-C port inside a vehicle, showing its quick recharge capability.

4. Bedienungsanleitung

4.1. Starthilfe für Ihr Fahrzeug

1. Stellen Sie sicher, dass der Starthilfe-Booster ausreichend geladen ist.
2. Setzen Sie den Smart-Cl einamps cable into the jump starter's dedicated port.
3. Verbinden Sie die rote (+) Klamp an den Pluspol der Fahrzeugbatterie.
4. Schließen Sie die schwarze (-) Klamp an den Minuspol der Fahrzeugbatterie.
5. Überprüfen Sie die Kontrollleuchte am Smart Client.amps. A solid green light indicates it's safe to proceed. If it flashes red or beeps, refer to the troubleshooting section.
6. Starten Sie den Motor des Fahrzeugs.
7. Once the vehicle starts, remove the smart clamps from the vehicle battery within 30 seconds.
8. Trennen Sie die Smart-Client-Verbindung.amps Kabel vom Starthilfegerät.

Image: The Andeman Jump Starter connected to a car battery, illustrating the ease of use for jump-starting a vehicle.

4.2. Verwendung als Powerbank

The 20000mAh capacity allows the jump starter to function as a power bank for various electronic devices.

• Connect your device's charging cable to one of the available USB output ports (USB-A: 2.1A; 5V/9V/12V or USB-B: 3A; 5V/2.1A).
• The dedicated Type-C port can also charge laptops at speeds comparable to their original adapters.
• Das LED-Display zeigt den verbleibenden Akkustand in Prozent an.tage.

Image: The 20000mAh power bank feature in action, charging a laptop, smartphone, tablet, headphones, and smartwatch.

4.3. Verwenden der LED-Taschenlampe

The built-in ultra-bright LED flashlight offers three lighting modes:

• Taschenlampe: For general illumination (e.g., inspecting an engine, changing a tire).
• SOSSE: A life-saving signal light for emergencies.
• Strobe: A traffic warning light to alert oncoming traffic.

Zum Aktivieren und Durchschalten der Modi drücken Sie die entsprechende Taschenlampentaste am Gerät.

Image: Illustration of the three versatile LED lighting modes: standard flashlight, SOS signal, and strobe, useful for various emergencies.

5. Wartung

5.1. Laden und Speichern

• Recharge the jump starter every 3-6 months if it is not in regular use to maintain battery health.
• Store the device in its protective storage box in a cool, dry place, away from direct sunlight and extreme temperatures.

6. Fehlerbehebung

Der smarte Klamps provide visual and audible feedback to help diagnose common issues:

7. Spezifikationen

8. Offizielle Produktvideos

9. Garantie und Support

For detailed warranty information and customer support, please refer to the user manual included in your product package. You may also contact Andeman customer service directly via email: andeman@andeman.com.