RADIOMASTER Boxer Crush Radio Controller Transmitter User Manual

1. Einleitung

The RADIOMASTER Boxer Crush Radio Controller Transmitter is a high-performance remote control system designed for RC enthusiasts. It features the EdgeTX Operating System and an ExpressLRS RF System, providing reliable and precise control for various remote-controlled vehicles. This manual provides essential information for setting up, operating, and maintaining your Boxer Crush transmitter.

2. Produktmerkmale

• Available in seven vibrant colors: Iron Grey, Frost White, Mint Mist, Hot Pink, Cherry Red, Iceberg Blue, and Lemon Twist Yellow.
• Equipped with CNC Aluminum AG01 Hall-effect Gimbals for precise control.
• Features a powerful STM32F407VGT6 microcontroller with 1MB Flash and 192KB RAM.
• Built-in ExpressLRS Backpack for enhanced connectivity.
• Redesigned SD card slot with a new and improved 512MB pre-loaded SD card included.

Image: The RADIOMASTER Boxer Crush Radio Controller in Iron Grey, highlighting its sleek design.

Image: A display of the RADIOMASTER Boxer Crush Radio Controller available in multiple vibrant colors.

3. Packungsinhalt

Upon unboxing your RADIOMASTER Boxer Crush, ensure all the following items are present:

• 1 x Boxer Crush Radio Transmitter
• 1 x Signature Carry Case
• 1 x T Antenna
• 1 x USB-C-Kabel
• 1 x Gimbal-Schutz

Image: The complete package contents of the RADIOMASTER Boxer Crush, including the transmitter, carry case, antenna, USB-C cable, and gimbal protector.

4. Einrichtung

4.1. Einlegen der Batterie

The Boxer Crush requires a 2S 6200mAh Li-Po battery (not included) or AA batteries using the provided battery pack. To install:

1. Suchen Sie das Batteriefach auf der Rückseite des Senders.
2. Schieben Sie den Riegel der Batterieabdeckung, um das Batteriefach zu öffnen.
3. Connect the Li-Po battery to the internal connector, ensuring correct polarity. If using AA batteries, insert them into the battery pack and connect the pack.
4. Carefully place the battery into the compartment and close the cover, ensuring it latches securely.

4.2. Antenneninstallation

Attach the T Antenna to the designated port on the top of the transmitter. Ensure it is securely fastened but do not overtighten.

4.3. Entfernen des Gimbal-Schutzes

Remove the gimbal protector before operating the transmitter to allow full range of motion for the gimbals.

5. Bedienungsanleitung

5.1. Ein-/Ausschalten

To power on the transmitter, press and hold the power button located centrally above the screen until the EdgeTX logo appears. To power off, press and hold the power button until the power-down sequence completes.

5.2. Grundlegende Steuerelemente

The Boxer Crush features two main gimbals for control inputs, along with various switches and buttons for auxiliary functions. Familiarize yourself with the layout:

• Kardanringe: Steuern Sie die primären Flugflächen (Gas, Querruder, Höhenruder, Seitenruder).
• Schalter: Used for flight modes, arming, and other programmable functions.
• Buttons (RTN, PAGE, TELE, SYS): Navigieren Sie durch das EdgeTX-Menüsystem.
• Scrollrad: Wird zur Menünavigation und Parametereinstellung verwendet.

Bild: Vorderseite view of the RADIOMASTER Boxer Crush, showing gimbals, screen, and control buttons.

5.3. Menu Navigation (EdgeTX)

The EdgeTX operating system provides extensive customization. Use the SYS button to enter the system menu, the PAGE buttons to navigate between pages, and the scroll wheel to select options and adjust values. The RTN button returns to the previous screen.

5.4. Joystick-Kalibrierung

Regular joystick calibration ensures optimal performance. Refer to the transmitter's internal menu for the calibration procedure. Generally, this involves moving both gimbals through their full range of motion.

5.5. Binding/Pairing

To bind your Boxer Crush transmitter to a receiver, follow the specific binding procedure outlined in your receiver's manual. Typically, this involves putting the receiver into bind mode and then initiating the binding process from the transmitter's EdgeTX menu.

6. Wartung

• Halten Sie den Sender sauber und frei von Staub und Schmutz. Verwenden Sie zum Reinigen ein weiches, trockenes Tuch.
• Store the transmitter in its carry case when not in use to protect it from damage.
• Ensure batteries are charged using appropriate chargers and follow battery safety guidelines.
• Überprüfen Sie regelmäßig alle Schalter und Kardanaufhängungen auf einwandfreie Funktion.

7. Fehlerbehebung

• Sender schaltet sich nicht ein: Prüfen Sie den Ladezustand der Batterie und stellen Sie sicher, dass sie korrekt eingesetzt ist.
• Keine Kontrollreaktion: Verify the transmitter is bound to the receiver and that the model is correctly selected in EdgeTX. Check antenna connection.
• Unregelmäßige Kontrolle: Perform joystick calibration. Check for any physical obstructions to the gimbals.
• SD-Kartenfehler: Ensure the SD card is properly seated. If issues persist, try reformatting the card (backing up data first) or using a different SD card.

8. Spezifikationen

Image: Diagram illustrating the dimensions of the RADIOMASTER Boxer Crush Radio Controller.

9. Garantie und Support

Informationen zur Garantie und zum technischen Support finden Sie auf der offiziellen RADIOMASTER-Website. webWebsite oder wenden Sie sich an Ihren autorisierten Händler. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

Official RADIOMASTER WebWebsite: www.radiomasterrc.com