Sharp Digital Alarm Clock (Model SPC5148AMZ) Instruction Manual

Einführung

Vielen Dank für Ihren Einkauf.asing the Sharp Digital Alarm Clock, Model SPC5148AMZ. This alarm clock features a large, easy-to-read red LED display, dual alarms, adjustable alarm volume, and a convenient snooze function. It is designed for simple operation and includes a battery backup feature to maintain time and alarm settings during power outages.

Bild: Vorderseite view of the Sharp Digital Alarm Clock, Model SPC5148AMZ, showcasing its large red LED time display.

Produktkomponenten und Kontrollen

Machen Sie sich mit den verschiedenen Teilen und Bedienelementen Ihres Weckers vertraut.

Bild: Rückseite view of the alarm clock, highlighting the Hour Set, Time Set, Alarm Volume, Minute Set buttons, Battery Compartment, and DC 5V Power Port.

• SNOOZE / DIMMER Button: Located on top. Press to snooze alarm or adjust display brightness.
• ALARM 1 Taste: Located on top. Activates/deactivates Alarm 1.
• ALARM 2 Taste: Located on top. Activates/deactivates Alarm 2.
• HOUR SET Button: Located on the back. Used to set the hour for time or alarm.
• ZEIT EINSTELLEN-Taste: Located on the back. Used to enter time setting mode.
• ALARM VOLUME Button: Located on the back. Adjusts the alarm loudness.
• MINUTE SET Button: Located on the back. Used to set the minute for time or alarm.
• DC-5V-Anschluss: Power input for the clock.
• Batteriefach: Holds 2 x AAA batteries (not included) for backup.

Aufstellen

Stromanschluss

1. Schließen Sie das mitgelieferte Netzteil an den 5V-Gleichstromanschluss auf der Rückseite des Weckers an.
2. Plug the adapter into a standard 110V/120V AC power outlet. The display will illuminate.

Batterie-Backup-Installation

For battery backup, which retains time and alarm settings during a power outage (display will be blank), install batteries:

1. Öffnen Sie die Batteriefachabdeckung auf der Rückseite des Geräts.
2. Insert 2 new AAA batteries (not included), observing the correct polarity (+ and -).
3. Schließen Sie den Batteriefachdeckel fest.

Wichtig: Batteries are for backup only. The clock requires AC power for the display to function and for the alarm to sound at full volume.

Bedienungsanleitung

Einstellen der Uhrzeit

1. Halten Sie die ZEITEINSTELLUNG Drücken Sie den Knopf auf der Rückseite der Uhr, bis die Stundenziffern zu blinken beginnen.
2. Drücken Sie die STUNDE EINGESTELLT button repeatedly to adjust the hour. Pay attention to the PM indicator light.
3. Drücken Sie die MINUTEN EINST Durch wiederholtes Drücken der Taste können die Minuten eingestellt werden.
4. Sobald die gewünschte Zeit eingestellt ist, drücken Sie die Taste ZEITEINSTELLUNG Zum Bestätigen und Verlassen des Zeiteinstellungsmodus erneut drücken.

Alarm einstellen (Alarm 1 und Alarm 2)

This clock features dual alarms. The procedure is the same for both Alarm 1 and Alarm 2.

1. Halten Sie die ALARM 1 or ALARM 2 button on the top of the clock until the alarm hour digits begin to flash.
2. Drücken Sie die STUNDE EINGESTELLT button repeatedly to adjust the alarm hour. Ensure the correct AM/PM is selected.
3. Drücken Sie die MINUTEN EINST Durch wiederholtes Drücken der Taste kann die Alarmminuteneinstellung angepasst werden.
4. Drücken Sie die ALARM 1 or ALARM 2 button again to confirm the alarm time. The corresponding alarm indicator light (AL.1 or AL.2) will illuminate on the display, indicating the alarm is active.

Activating/Deactivating Alarms

• To activate an alarm: Press the ALARM 1 or ALARM 2 button once. The corresponding indicator light will turn on.
• To deactivate an alarm: Press the ALARM 1 or ALARM 2 button again. The corresponding indicator light will turn off.

Schlummerfunktion

Wenn der Alarm ertönt, drücken Sie die große Taste. SCHLUMMER / DIMMER button on top of the clock. The alarm will pause for 9 minutes and then sound again. You can repeat this process until the alarm is manually turned off.

Adjusting Display Brightness (Dimmer)

Drücken Sie die SCHLUMMER / DIMMER button (when the alarm is not sounding) to cycle through the display brightness levels: High, Medium, Low, or OFF.

Einstellen der Alarmlautstärke

Drücken Sie die ALARMLAUTSTÄRKE button on the back of the clock to cycle through the alarm loudness levels: High, Medium, Low.

Wartung

• Reinigung: Reinigen Sie die Uhr mit einem weichen, trockenen Tuch. Verwenden Sie keine Scheuermittel oder Lösungsmittel.
• Batteriewechsel: Replace backup batteries annually or when the clock experiences frequent power outages to ensure settings are retained.
• Platzierung: Place the clock on a stable, flat surface. Avoid direct sunlight, extreme temperatures, and high humidity.

Fehlerbehebung

Technische Daten

• Modell: SPC5148AMZ
• Marke: Scharf
• Anzeigetyp: Digitale LED (Rot)
• Anzeigegröße: 3 inches (Jumbo Numbers)
• Energiequelle: Corded Electric (110V/120V AC)
• Batterie-Backup: 2 x AAA-Batterien (nicht im Lieferumfang enthalten)
• Abmessungen (B x H): 8.27" x 4.13"
• Gewicht: 0.41 Kilogramm
• Besondere Merkmale: Dual Alarms, Adjustable Brightness (High, Medium, Low, OFF), Adjustable Alarm Volume (High, Medium, Low), 9-minute Snooze.

Garantieinformationen

Sharp products are manufactured and sold by M.Z. Berger & Co. Inc. This product comes with a limited warranty against defects in materials and workmanship. For specific warranty details, including duration and terms, please refer to the warranty card included in your product packaging or contact customer support.

Kundenservice

For assistance with your Sharp Digital Alarm Clock, please contact the manufacturer's customer support. Contact information can typically be found on the product packaging or the manufacturer's official webWebsite.

Manufacturer: Sharp (M.Z. Berger & Co. Inc.)

Produkt überview Video