Einführung
This manual provides detailed instructions for the proper use, setup, and maintenance of your SmallRig x Potato Jet Tribex Hydraulic Carbon Fiber Tripod Leg, Model 4858. Please read this manual thoroughly before operating the product to ensure optimal performance and safety.
Sicherheitshinweise
- Ensure all locking mechanisms are securely fastened before mounting equipment.
- Do not exceed the maximum load capacity of 25kg (55lbs) when the center column is not raised, or 8kg (16.6lbs) when the center column is raised.
- Vermeiden Sie es, das Stativ extremen Temperaturen oder korrosiven Umgebungen auszusetzen.
- Keep hands and fingers clear of moving parts during adjustment to prevent injury.
- Always check the stability of the tripod on uneven terrain before use.
Packungsinhalt
Bitte überprüfen Sie, ob alle unten aufgeführten Artikel in Ihrem Paket enthalten sind:
- Tripod Leg Kit x 1
- Inbusschlüssel x 1
- Aufbewahrungstasche x 1
- Smartphone-Halterung x 1
Produkt überview
The SmallRig x Potato Jet Tribex Hydraulic Carbon Fiber Tripod Leg (Model 4858) is designed for rapid deployment and stable camera support. It features patented X-CLUTCH hydraulic technology for quick leg adjustments and a lightweight carbon fiber construction.
Hauptmerkmale:
- X-CLUTCH Hydraulic Technology: Allows for rapid unfolding, angle adjustment, and automatic locking of legs with a single clutch.
- Lightweight Carbon Fiber Construction: Weighs 2.6kg (5.7lbs) for enhanced portability.
- Hohe Tragfähigkeit: Supports up to 25kg (55lbs) without the center column raised, and 8kg (16.6lbs) with the center column raised.
- Einstellbarer Höhenbereich: Operates from 15cm (5.9in) to 155cm (61.0in).
- Vielseitige Montage: Features a 3/8"-16 screw for various flat base heads and three 1/4"-20 threaded holes for accessories.
- Adaptable Feet: Quick-release rubber feet with integrated spikes for different terrains.
Aufstellen
- Das Stativ auspacken: Carefully remove the tripod and all accessories from the storage bag.
- Attach Tripod Head (if applicable): The tripod features a 3/8"-16 screw. If using a separate tripod head, securely screw it onto the top plate. Ensure it is tightened firmly.
Image: Illustration of attaching a tripod head to the 3/8"-16 screw on the tripod's top plate. - Initial Leg Deployment: Hold the tripod firmly and squeeze the X-CLUTCH lever. The legs will rapidly unfold. Adjust the leg angles as needed. Release the lever to lock the legs in position.
- Stabilität prüfen: Before mounting any equipment, gently press down on the tripod to ensure it is stable and all leg locks are engaged.
Bedienungsanleitung
1. Adjusting Leg Angles and Height (X-CLUTCH Hydraulic Technology)
The Tribex tripod utilizes an X-CLUTCH hydraulic system for quick and precise leg adjustments.
- So passen Sie an: Squeeze the X-CLUTCH lever located on the tripod's central column. This will unlock all three legs simultaneously.
- Positionierung: While holding the lever, move the tripod legs to the desired angle and height. The clutch can be adjusted to 45° and 90° positions for various shooting scenarios.
- Verriegelung: Release the X-CLUTCH lever. The legs will automatically lock into their new position. Ensure a firm lock before use.
2. Center Column Adjustment
The center column features a quick-lock design for easy height adjustments.
- Zum Anheben/Absenken: Loosen the center column lock, adjust to the desired height, and then tighten the lock securely.
- Aufnahmen aus niedrigem Winkel: The tripod supports low-angle shooting down to a minimum height of 15cm (5.9in) by fully splaying the legs and lowering the center column.
3. Adapting to Various Terrains (Quick-Release Feet)
The tripod is equipped with quick-release rubber feet that have integrated spikes.
- Zum Umschalten: Press the button on each foot to release the rubber cover, exposing the metal spikes.
- Verwendung: Use rubber feet for smooth, indoor surfaces. Deploy spikes for outdoor, uneven, or soft terrains like grass, dirt, or rocky ground to enhance stability.
4. Anbringen von Zubehör
The tripod includes three 1/4"-20 threaded holes for attaching various accessories.
- Zubehörmontage: Use these threads to attach magic arms, monitors, microphones, or other compatible accessories.
- Inbusschlüssel: A detachable Allen wrench is built into the hook on the tripod for convenient assembly and disassembly of camera equipment.
Wartung
- Reinigung: Wischen Sie das Stativ nach jedem Gebrauch mit einem weichen, trockenen Tuch ab. Bei hartnäckigem Schmutz verwenden Sie ein leicht dämpfendes Tuch.amp Tuch und milder Seife reinigen und anschließend gründlich trocknen.
- Schmierung: Periodically check leg mechanisms for smooth operation. If any part feels stiff, a small amount of silicone-based lubricant can be applied to moving joints, avoiding the X-CLUTCH mechanism.
- Lagerung: Bewahren Sie das Stativ in der mitgelieferten Aufbewahrungstasche an einem kühlen, trockenen Ort, fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
- Inspektion: Regularly inspect all screws, bolts, and locking mechanisms for tightness. Tighten any loose components using the provided Allen wrench.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Legs do not extend or retract smoothly. | Dirt or debris in leg sections; insufficient lubrication. | Clean leg sections thoroughly. Apply a small amount of silicone lubricant if necessary, avoiding the X-CLUTCH mechanism. |
| Tripod feels unstable after setup. | Legs not fully locked; uneven terrain; overloaded. | Ensure X-CLUTCH lever is fully released and legs are locked. Adjust leg angles for stability on uneven ground. Verify equipment weight does not exceed load capacity. |
| X-CLUTCH lever is stiff or difficult to operate. | Accumulated dirt; mechanism requires cleaning. | Clean the X-CLUTCH mechanism area. Avoid applying lubricant directly to the clutch. |
| Accessories do not attach securely to 1/4"-20 threads. | Incorrect screw size; threads are dirty or damaged. | Ensure accessories use 1/4"-20 screws. Clean threads. If threads are damaged, contact support. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | 4858 |
| Material | Kohlefaser, Aluminiumlegierung, POM, Edelstahl, Silikon |
| Produktabmessungen (gefaltet) | 66.0 x 14.0 x 12.0 cm (26.0 x 5.5 x 4.7 Zoll) |
| Artikelgewicht | 2.6 kg |
| Maximum Payload (Center Column Not Raised) | 25 kg |
| Maximum Payload (Center Column Raised) | 8 kg |
| Betriebshöhenbereich | 15 cm (5.9 Zoll) bis 155 cm (61.0 Zoll) |
| Speicherdauer | 66 cm (26.0 Zoll) |
| Beindurchmesser | 29.5 mm - 25.5 mm - 22 mm (1.16 in - 1.0 in - 0.86 in) |
| Head Base Diameter | 60.0 mm (2.36 Zoll) |
| Tripod Head Type Compatibility | Flat Base Head (3/8"-16 screw) |
| Accessory Threads | 3 x 1/4"-20 |
Garantie und Support
SmallRig provides a 4-year warranty for the Tribex tripod. For warranty claims, technical support, or service inquiries, please contact SmallRig customer service through their official webWebsite oder den Händler, bei dem das Produkt gekauft wurde.
For additional resources and product information, visit the official SmallRig webWebsite: www.smallrig.com
