NEXPOW NP17 G17

NEXPOW NP17 Portable Tire Inflator and G17 Car Jump Starter User Manual

Model: NP17, G17

1. Produktüberschreitungview

The NEXPOW NP17 Portable Tire Inflator and G17 Car Jump Starter is a versatile emergency tool designed for vehicle owners. This compact device integrates a powerful jump starter for 12V vehicle batteries and a fast-acting tire inflator with precise pressure control. It is equipped with multiple safety features to ensure reliable operation during unexpected roadside situations.

2. Sicherheitshinweise

Lesen Sie vor der Verwendung dieses Produkts alle Sicherheitshinweise und Anweisungen sorgfältig durch. Die Nichtbeachtung dieser Anweisungen kann zu Stromschlag, Brand und/oder schweren Verletzungen führen.

  • Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf.
  • Setzen Sie das Gerät weder Regen noch Nässe aus.
  • Das Gerät darf nicht bedient werden, wenn es beschädigt oder verändert wurde.
  • Sorgen Sie während der Verwendung und des Ladevorgangs für ausreichende Belüftung.
  • Vermeiden Sie einen Kurzschluss des Starthilfekabels.amps.
  • Do not jump start hybrid or electric vehicles with this device.
  • Schließen Sie immer den Starthilfe-Stecker an.amps to the correct battery terminals (positive to positive, negative to negative).
  • Trennen Sie die Starthilfekabel.amps within 30 seconds after the vehicle starts.
  • Do not over-inflate tires. Always refer to the vehicle's recommended tire pressure.
  • The device includes built-in protections against overload, short-circuits, over-discharge, and overcharge.

3. Produktkomponenten und -merkmale

Familiarize yourself with the key components and features of your NEXPOW device.

NEXPOW NP17 G17 device with digital display showing tire pressure and mode selection

Abbildung 3.1: Digitalanzeige und Bedienfeld

The device features an intuitive digital interface with an LED display. This display shows real-time battery levels and tire pressure readings. Users can select from 4 pressure units (PSI, Bar, Kpa, Kg/cm²) and 5 inflation modes (Car, Bicycle, Motorcycle, Spherical, Custom) for precise monitoring and adjustment.

NEXPOW NP17 G17 device with 9000mAh battery capacity and examples of tire inflation counts for different vehicles

Abbildung 3.2: Langlebige Batterie

The device is equipped with a 9000 mAh long-lasting battery, providing sufficient power for multiple inflation tasks. Examples show it can inflate approximately 70 bike tires, 62 motorcycle tires, or 22 car tires on a single charge (experimental data).

NEXPOW G17 Jump Starter with 2000A peak current rating and battery clamps

Figure 3.3: G17 Jump Starter Unit

The G17 jump starter component provides a powerful 2000A peak current, capable of reviving 12V batteries in various vehicles including Diesel, Gas, Motorcycles, Lawn Mowers, and Yachts. It is important to note that this unit is not suitable for hybrid or electric vehicles.

NEXPOW device charging multiple USB devices, showing USB, USB 3.0, USB-C 3.0, and DC outputs

Abbildung 3.4: USB-Ladeanschlüsse

The device includes multiple output ports for charging USB devices, including standard USB, USB 3.0, USB-C 3.0, and a DC output. This allows for quick charging of various electronic gadgets. Note that it may not support charging low-power devices with current less than 150mAh.

NEXPOW NP17 G17 highlighting efficient cooling system and safety protections like over-discharge and overcharge

Figure 3.5: Safety and Cooling System

The NEXPOW NP17 features an efficient cooling system, enhancing safety and promoting longer service life. It also incorporates essential safety protections such as over-discharge and overcharge prevention.

4. Einrichten und Laden

4.1 Erstaufladung

Before first use, fully charge the NEXPOW device. Use the provided charging cable and a suitable power adapter (not always included, check packaging) to charge the unit. The LED display will indicate the charging status and battery level.

4.2 Attaching the Inflator Hose

Connect the 19.69-inch inflatable hose to the designated port on the device. Ensure it is securely fastened to prevent air leakage during inflation.

5. Bedienungsanleitung

5.1 Verwendung des Reifenfüllers

The tire inflator features an auto shut-off function for safe and reliable inflation.

  1. Schließen Sie den Füllschlauch an die Ventilspindel des Reifens an.
  2. Power on the device. The LED display will show the current tire pressure.
  3. Use the control buttons to select the desired pressure unit (PSI, Bar, Kpa, Kg/cm²) and inflation mode (Car, Bicycle, Motorcycle, Spherical, Custom).
  4. Set the target pressure using the '+' and '-' buttons.
  5. Press the start button to begin inflation. The device will automatically stop once the preset pressure is reached.
  6. Disconnect the hose from the tire valve.
NEXPOW NP17 G17 tire inflator connected to a car tire, showing auto shut-off feature

Abbildung 5.1: Reifenaufpumpen im Gange

This image illustrates the NEXPOW NP17 tire inflator connected to a car tire, highlighting its auto shut-off capability and the convenience of its 19.69-inch hose, allowing for hands-free operation.

NEXPOW NP17 G17 showing dual-mode inflation: cordless and corded 12V DC adapter

Figure 5.2: Dual-Mode Inflation Capability

The device supports dual-mode inflation, offering both cordless operation for portability and a corded option via a 12V DC adapter. The corded mode allows the inflator to function even if the internal battery is depleted, providing continuous utility.

5.2 Using the Car Jump Starter

Befolgen Sie diese Schritte, um Ihr Fahrzeug sicher zu überbrücken:

  1. Schritt 1: Insert the jumper cable into the jump starter port. Ensure a secure connection.
  2. Schritt 2: Verbinden Sie die roteamp an den Pluspol (+) Ihrer Autobatterie und den schwarzen Steckeramp an den Minuspol (-).
  3. Schritt 3: Start your car engine. If the engine does not start immediately, wait 30 seconds before attempting again. Do not crank for more than 3 seconds per attempt.
  4. Schritt 4: Once the car starts, remove the clamps from the car battery within 30 seconds to complete the operation. Disconnect the black clamp zuerst, dann das rote clamp, and finally remove the jumper cable from the jump starter.
Four-step visual guide on how to jump start a car using the NEXPOW G17 jump starter

Abbildung 5.3: Starthilfeverfahren

This visual guide demonstrates the four essential steps for safely jump starting a vehicle: connecting the jumper cable to the device, attaching clamps to the car battery, starting the engine, and finally, removing the clamps.

5.3 Aufladen von USB-Geräten

So laden Sie Ihre elektronischen Geräte auf:

  1. Connect your device's charging cable to one of the available USB (USB, USB 3.0, USB-C 3.0) or DC output ports on the NEXPOW unit.
  2. The NEXPOW unit will automatically begin charging your device.
  3. Überwachen Sie den Ladestatus Ihres Geräts.

6. Wartung

  • Lagerung: Bewahren Sie das Gerät an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
  • Laden: Für eine optimale Akkulaufzeit laden Sie das Gerät mindestens einmal alle drei Monate auf, auch wenn es nicht benutzt wird.
  • Reinigung: Reinigen Sie die Außenseite des Geräts mit einem weichen, trockenen Tuch. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
  • Schlauch und Clamps: Inspect the inflator hose and jump starter clamps for any signs of wear or damage before each use. Replace if necessary.

7. Fehlerbehebung

ProblemMögliche UrsacheLösung
Gerät lässt sich nicht einschalten.Batterie ist leer.Laden Sie das Gerät vollständig auf.
Tire inflator not working or inflating slowly.Hose not securely connected; target pressure not set; battery low.Ensure hose is tight; set target pressure; charge device or use 12V DC adapter.
Car does not jump start.Falsche Klamp connection; battery too deeply discharged; vehicle issue.Verify correct polarity (+ to +, - to -); ensure device is fully charged; consult a mechanic if vehicle issues persist.
USB-Geräte werden nicht geladen.Device battery low; low-power device (under 150mAh).Charge the NEXPOW unit; confirm device requires more than 150mAh.

8. Spezifikationen

  • Modell: NP17 (Tire Inflator), G17 (Jump Starter)
  • Marke: NEXPOW
  • Jump Starter Peak Current: 2000 A
  • Batteriekapazität: 9000 mAh (intern)
  • Länge des Inflatorschlauchs: 19.69 Zoll
  • Druckeinheiten: PSI, Bar, Kpa, Kg/cm²
  • Inflationsmodi: Car, Bicycle, Motorcycle, Spherical, Custom
  • Ausgangsanschlüsse: USB, USB 3.0, USB-C 3.0, DC
  • Vehicle Compatibility (Jump Start): 12V Diesel, Gas, Motorcycle, Lawn Mower, Yacht. Not for hybrid or electric vehicles.
  • Sicherheitsmerkmale: Auto Shut-Off (Inflator), Overload Protection, Short-circuit Protection, Over-discharge Protection, Overcharge Protection, Efficient Cooling System.

9. Garantie und Support

Specific warranty information is not provided in the product details. For warranty claims or technical support, please refer to the contact information provided with your product packaging or visit the official NEXPOW webWebsite.

© 2026 NEXPOW. Alle Rechte vorbehalten.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.