EROK EK-AMT-600

EROK Digital Metronome & Tuner (Model EK-AMT-600) Instruction Manual

Your all-in-one rechargeable device for precise tuning and rhythm practice.

Einführung

The EROK Digital Metronome & Tuner (Model EK-AMT-600) is a versatile 3-in-1 device combining a digital metronome, chromatic tuner, and tone generator. This compact, rechargeable unit features a clear, full-color display and supports various instruments including guitar, bass, violin, ukulele, viola, cello, and wind instruments. It offers voice counting for metronome beats and comes with a contact clip-on microphone for accurate tuning.

EROK Digital Metronome and Tuner, white model, showing its display and compact size.

Image: The EROK Digital Metronome and Tuner (Model EK-AMT-600) in white, showcasing sein Display und seine kompakte Bauweise.

Lieferumfang

  • 1x EROK Digital Metronome & Tuner (Model EK-AMT-600)
  • 1x Benutzerhandbuch
  • 1x USB Typ-C Ladekabel
  • 1x Pickup Clip

Produkteigenschaften

  • 3-in-1-Funktionalität: Combines a metronome, tuner, and tone generator in one portable device.
  • Wiederaufladbarer Akku: Built-in 600mAh Lithium Polymer battery provides over 5 hours of continuous use after a 2-hour charge.
  • Klare Anzeige: Large, full-color LCD screen for easy readability.
  • Versatile Metronome: Wide tempo range (30-260 BPM), 10 beat subdivisions (0-9), 8 rhythm patterns, voice beat counting, and tap tempo function.
  • Multi-Function Chromatic Tuner: Supports various instruments (Guitar, Bass, Violin, Ukulele, Chromatic, Wind Instruments) with a detection range of A0-C8 and pitch calibration (410-450Hz).
  • Multiple Tuning Input Methods: Built-in microphone, included pickup clip, or 1/4-inch input jack (cable not included).
  • Tongenerator: Produces precise reference tones for tuning by ear.
  • Benutzerfreundliches Design: Features adjustable volume, built-in speaker, headphone output, and a foldable stand.
EROK Digital Metronome and Tuner highlighting Chromatic Tuner, Tap Tempo Metronome, Tone Generator, and Intuitive User Interface features.

Image: Key features of the EROK Digital Metronome and Tuner, including its chromatic tuner, tap tempo metronome, tone generator, and intuitive user interface.

Controls and Functions Overview

Diagram of EROK Digital Metronome and Tuner controls, labeling Headphone Jack, Metronome Tuner Switch, Voice Beat Button, Rhythm Button, TAP Button, LED Indicator, Volume Wheel, USB Type-C Jack, Microphone, On/Off/Play Button, and Tempo/Beat Select buttons.

Image: Labeled diagram of the EROK Digital Metronome and Tuner, showing the location and function of each button, jack, and indicator.

  • LED-Anzeige: Displays status (e.g., charging, tuning accuracy).
  • Kopfhöreranschluss (3.5 mm): Für das private Üben mit Kopfhörern.
  • Metronom-/Stimmgerät-Schalter (M/T): Long press to toggle between metronome and tuner modes.
  • Voice Beat Button (VOICE): Activates or deactivates voice counting in metronome mode.
  • Rhythm Button (Music Note Icon): Cycles through different rhythm patterns in metronome mode.
  • TAP-Taste: Allows manual setting of tempo by tapping.
  • Lautstärkerad: Passt die Ausgabelautstärke an.
  • USB Type-C Jack: Zum Aufladen des Gerätes.
  • Mikrofon: Built-in microphone for tuning and sound detection.
  • On/Off/Play Button (START): Long press to power on/off; short press to start/stop metronome.
  • Tempo/Beat Select Buttons (Up/Down Arrows): Adjust tempo, beat, or tuning parameters.
  • Tonabnehmerbuchse (6.35 mm): Input for external pickup clip or instrument cable.

Aufstellen

Aufladen des Geräts

The EK-AMT-600 features a built-in rechargeable Lithium Polymer battery. To charge:

  1. Connect the provided USB Type-C cable to the USB Type-C Jack on the side of the device.
  2. Verbinden Sie das andere Ende des Kabels mit einem Standard-USB-Netzteil (nicht im Lieferumfang enthalten) oder einem USB-Anschluss Ihres Computers.
  3. The LED indicator will show charging status. A full charge typically takes approximately 2 hours and provides over 5 hours of continuous use.
EROK Digital Metronome and Tuner showing its Type-C charging port and battery life indicators.

Image: The EROK Digital Metronome and Tuner highlighting its long-lasting rechargeable battery, Type-C charging port, and estimated usage time.

Ein-/Ausschalten

Zum Einschalten des Geräts lange drücken Die START button. To power off, lange drücken Die START erneut die Taste.

Operating the Metronome

The metronome function helps musicians maintain a steady tempo. Ensure the device is powered on.

  1. Switch to Metronome Mode: If not already in metronome mode, long press the M / T button to switch from tuner to metronome.
  2. Metronom starten/stoppen: Drücken Sie kurz die START button to begin the metronome beat. Short press again to stop.
  3. Tempo anpassen (BPM): Verwenden Sie die Pfeil nach oben / unten buttons to increase or decrease the tempo (beats per minute) from 30 to 260 BPM.
  4. Tippen Sie auf Tempo: Drücken Sie die KLOPFEN button repeatedly at your desired tempo. The device will calculate and set the BPM.
  5. Change Beat Subdivisions: Verwenden Sie die Pfeil nach oben / unten buttons to change the beat subdivision (0-9).
  6. Change Rhythm Pattern: Drücken Sie die Symbol für Musiknotiz button to cycle through 8 different rhythm patterns.
  7. Enable Voice Counting: Drücken Sie die STIMME button to activate or deactivate human voice counting for the beats.
  8. Lautstärke anpassen: Verwenden Sie die Volumenrad an der Seite des Geräts.
  9. Verwendung von Kopfhörern: Schließen Sie 3.5-mm-Kopfhörer an den Kopfhöreranschluss für die Privatpraxis.

Video: Demonstrates powering on the device, enabling voice counting, changing beat patterns, and manually setting tempo in metronome mode.

Detailed display of EROK Digital Metronome and Tuner, showing metronome settings like voice beat, battery status, beats, rhythm pattern, tempo, and metronome meters.

Bild: Detailliert view of the metronome display, indicating voice beat, battery status, beat count, rhythm pattern, tempo, and metronome meters.

Operating the Tuner

The tuner function allows for accurate instrument tuning. Ensure the device is powered on.

  1. Switch to Tuner Mode: Drücken Sie lange die M / T button to switch from metronome to tuner mode.
  2. Select Tuning Input Method:
    • Eingebautes Mikrofon: For acoustic instruments, simply play a note near the device's microphone.
    • Pickup Clip: Connect the included pickup clip to the Pickup Jack (6.35mm) and attach the clip to your instrument's headstock or soundboard. This is ideal for noisy environments.
    • 1/4-Inch Input Jack: Connect an instrument cable (not included) from your instrument to the Pickup Jack (6.35mm).
  3. Abstimmungsmodus auswählen: Verwenden Sie die Pfeil nach oben / unten buttons to cycle through tuning modes: Chromatic (C), Guitar (G), Bass (B), Violin (V), Ukulele (U), and Wind Instruments.
  4. Stimmen Sie Ihr Instrument: Play a single note on your instrument. The display will show the note name, string number, and a tuning meter.
    • If the needle is to the left, the note is flat. Tighten the string.
    • If the needle is to the right, the note is sharp. Loosen the string.
    • When the needle is centered and the display turns green, the note is in tune.
  5. Adjust Pitch Calibration (A4): In tuner mode, you can adjust the A4 reference frequency (typically 440Hz) using specific button combinations (refer to on-screen prompts or detailed manual for exact steps if not intuitive). The device supports 410-450Hz.

Video: Demonstrates switching to tuner mode, using the pickup clip for guitar tuning, and interpreting the tuning display.

EROK Digital Metronome and Tuner illustrating three ways to pick up sound for tuning: built-in pickup, included pickup clip, and guitar cable 6.35mm input.

Image: The EROK Digital Metronome and Tuner showing its three sound input methods for tuning: built-in microphone, pickup clip, and 6.35mm instrument cable input.

EROK Digital Metronome and Tuner connected to a guitar headstock via its pickup clip for tuning.

Image: The EROK Digital Metronome and Tuner connected to a guitar headstock using the included pickup clip for accurate tuning.

Tongenerator

The tone generator function allows the device to produce precise reference tones, similar to a pitch pipe. This is useful for tuning instruments by ear or for practicing pitch recognition.

  1. Activate Tone Generator: While in Tuner mode, press a specific button (often the STIMME or Rhythmus button, depending on the model's specific interface) to activate the tone generator. The display will typically show the note being generated.
  2. Select Note/Mode: Verwenden Sie die Pfeil nach oben / unten buttons to select the desired note or tuning mode (Chromatic, Guitar, Bass, Violin, Ukulele) for the reference tone.
  3. Lautstärke anpassen: Verwenden Sie die Volumenrad to control the output level of the generated tone.

Wartung

  • Reinigung: Reinigen Sie das Gerät mit einem weichen, trockenen Tuch. Verwenden Sie keine Scheuermittel oder Lösungsmittel.
  • Lagerung: Bewahren Sie das Gerät an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
  • Batteriepflege: Um die Akkulaufzeit zu verlängern, vermeiden Sie häufiges vollständiges Entladen des Akkus. Laden Sie das Gerät regelmäßig auf, auch wenn es längere Zeit nicht benutzt wird.
  • Feuchtigkeit vermeiden: Um Schäden an den internen Bauteilen zu vermeiden, halten Sie das Gerät von Wasser und hoher Luftfeuchtigkeit fern.

Fehlerbehebung

  • Das Gerät lässt sich nicht einschalten: Ensure the battery is charged. Connect the device to a power source using the USB Type-C cable and try again after a few minutes.
  • Tuner not detecting notes accurately:
    • Check the input method: Ensure the built-in microphone is unobstructed, the pickup clip is securely attached, or the instrument cable is fully inserted.
    • Verify the tuning mode: Make sure the correct instrument mode (e.g., Guitar, Bass) or Chromatic mode is selected.
    • Minimize background noise: For microphone tuning, ensure a quiet environment. The pickup clip is recommended for noisy settings.
    • Check instrument intonation: If individual strings consistently tune incorrectly despite proper technique, your instrument's intonation may need adjustment by a professional.
  • Metronome sound is too low or absent: Check the volume wheel on the side of the device. Ensure headphones are not plugged in if you expect sound from the built-in speaker.
  • Die Akkulaufzeit ist kürzer als erwartet: Ensure the device is fully charged (approx. 2 hours). Extreme temperatures can affect battery performance.
  • Tasten reagieren nicht: Try powering the device off and on again. If the issue persists, ensure no debris is obstructing the buttons.

Technische Daten

ModellnummerEK-AMT-600
Maße4.17 x 2.91 x 0.79 Zoll (10.6 x 7.4 x 2.0 cm)
Artikelgewicht6.4 Unzen (181 Gramm)
Akku-Typ1 Lithium-Polymer-Akku (im Lieferumfang enthalten)
LadezeitCa. 2 Stunden
DauergebrauchszeitOver 5 hours (after full charge)
Metronom-Tempobereich30-260 BPM
Metronome Beat Subdivisions0-9
Tuning Detection RangeA0 (27.5 Hz) - C8 (4186 Hz)
Pitch Calibration (A4)410-450 Hz
Tuning-ModiChromatic, Guitar, Bass, Violin, Ukulele, Wind Instruments
EROK Digital Metronome and Tuner with dimensions labeled: 10.8cm (4.25in) height, 7.2cm (2.83in) width, 2cm (0.787in) thickness.

Image: Dimensions of the EROK Digital Metronome and Tuner, showing its compact size.

Garantie und Support

EROK products are designed for reliability and performance. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official EROK webWebsite.

Bitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.