AirheadStorm CLB084-4D 12V Remote Control and Receiver Kit Instruction Manual

Einführung

This manual provides detailed instructions for the installation, operation, and maintenance of your AirheadStorm CLB084-4D 12V Remote Control and Receiver Kit. This kit is designed as a replacement part for specific children's electric ride-on cars, offering a 2.4G remote control system with a slow start function for enhanced safety.

Bitte lesen Sie diese Bedienungsanleitung vor der Installation und Inbetriebnahme sorgfältig durch, um eine einwandfreie Funktion und Sicherheit zu gewährleisten.

Sicherheitshinweise

• Ensure the electric vehicle's power is OFF before installing or replacing any components.
• Always verify that the replacement parts match the original specifications (e.g., model number, voltage) um Schäden zu vermeiden.
• Regularly inspect the vehicle's motor, battery, and wiring for any signs of wear or damage. Replace faulty components immediately.
• Keep electronic components away from water and excessive moisture.
• Adult supervision is required during installation and when children operate the ride-on car.

Packungsinhalt

The AirheadStorm CLB084-4D kit includes the following components:

• 1 x Receiver (CLB084-4D 12V Control Box)
• 1 x Remote Control (2.4G White Remote Control)

Image: The CLB084-4D receiver and its corresponding 2.4G remote control. The receiver is a black box with wiring, and the remote is white with black buttons.

Setup und Installation

1. Kompatibilitätsprüfung

Before installation, ensure that the CLB084-4D 12V control box is compatible with your children's ride-on toy. This model is compatible with CLB084-4C 12V systems. Visually compare the appearance and model number of the new parts with your original components.

Image: A comparison showing the CLB084-4A/4C/4D remote (white light indicator) and receiver on the left, and the CLB084-4F remote (red light indicator) and receiver on the right. This helps identify the correct model for replacement.

2. Prüfungen vor der Installation

Verify that other essential functions of the ride-on car, such as the motor and battery, are in normal working condition before installing the new controller and remote.

3. Installationsschritte

1. Turn off the power to the children's electric vehicle.
2. Carefully remove the old receiver (control box) from the vehicle. Note the wiring connections.
3. Connect the new CLB084-4D receiver to the vehicle's wiring harness, ensuring all connections are secure and match the original configuration.
4. Secure the receiver in its designated location within the vehicle.

Bedienungsanleitung

1. Fernbedienungsbetrieb

Image: Diagram illustrating the buttons on the 2.4G remote control, including Forward/Backward, Left/Right movement, Emergency Stop, and Speed Adjustment buttons, along with gear indicator lights.

1. Netzschalter: Drücken Sie , um die Fernbedienung einzuschalten.
2. Signal Matching: To match the remote control with the receiver:
   • Ensure the vehicle's power is OFF.
   • Drücken und halten Sie die "Taste zur Geschwindigkeitseinstellung" Und "Not-Aus-Taster" simultaneously for 5 seconds.
   • While holding, turn on the vehicle's power.
   • When the gear indicator light on the remote control illuminates steadily (does not flash), the signal is successfully matched. The front wheels of the vehicle will turn left and right for one second to confirm.
   • The matching process is available for approximately 2 minutes after the vehicle is powered on.

2. Fernbedienungsfunktionen

• Forward/Backward Button: Steuert die Bewegungsrichtung des Fahrzeugs.
• Left/Right Movement Button: Controls the vehicle's steering.
• Not-Aus-Taster: Immediately stops the vehicle.
• Taste zur Geschwindigkeitsanpassung: Cycles through different speed settings (1st, 2nd, 3rd gear, indicated by lights).

3. Schlafmodus

The remote control will enter sleep mode if there is no operation for approximately 1 minute. To reactivate, press any button.

Wartung

• Keep the remote control and receiver clean and dry. Wipe with a soft, dry cloth.
• Avoid dropping or subjecting the components to strong impacts.
• Bewahren Sie das Set an einem kühlen, trockenen Ort auf, wenn es nicht in Gebrauch ist.
• Check battery compartment of the remote control periodically for corrosion and replace batteries as needed.

Fehlerbehebung

Technische Daten