1. Einleitung
The LILYGO T-Display S3 Pro LR1121 is an advanced development board built upon the T-Display S3 Pro External Expansion Module. It integrates the LR1121 chip, offering dual LoRa band capabilities (Sub-G band and 2.4G band). This board features a 2.33-inch touch IPS TFT SPI LCD for interactive applications.
Key integrated functions include motor vibration, Real-Time Clock (RTC), speaker, and microphone. It is powered by a built-in high-capacity 2000mAh Li-ion battery. The robust ABS+PC material shell is designed with two external LoRa antenna ports, ensuring optimal wireless performance without internal interference. A 1/4-inch screw mount at the bottom allows for attachment to outdoor fixtures like tripods.
Figure 1.1: LILYGO T-Display S3 Pro LR1121 front view with antennas extended.
Abbildung 1.2: Detailansichtview of LILYGO T-Display S3 Pro LR1121 features.
2. Einrichtung
2.1 Ersteinrichtung der Hardware
- Antenneninstallation: Carefully connect the two LoRa external antennas to the designated ports on the side of the device. Ensure they are securely fastened. The LR1121 antenna can be rotated 180 degrees in the direction of the screen; avoid rotating it backward.
- Stromanschluss: Connect the LILYGO T-Display S3 Pro LR1121 to a power source using a standard USB-C cable. The device has a built-in 2000mAh Li-ion battery.
Abbildung 2.1: Zurück view with pinout diagram.
Figure 2.2: Detailed Pinmap Diagram.
2.2 Einrichtung der Softwareumgebung
For programming and development, refer to the official GitHub repository for detailed instructions on setting up your development environment, including Arduino-IDE or VS Code.
- GitHub-Repository: github.com/Xinyuan-LilyGO/T-Display-S3-Pro-MVSRLora
3. Bedienungsanleitung
3.1 Grundlegende Bedienung
- Ein-/Ausschalten: Use the designated power button (if available) or connect/disconnect USB power to turn the device on or off.
- Display-Interaktion: The 2.33-inch touch IPS TFT SPI LCD supports touch input. Interact with on-screen elements as programmed.
Figure 3.1: Display showing touch information.
3.2 Drahtlose Kommunikation
The board supports multiple wireless communication protocols:
- Lora: Utilizes the LR1121 chip for Sub-G band and 2.4G band LoRa communication. Ensure antennas are properly connected for optimal range.
- W-lan: Supports Wi-Fi 802.11 for network connectivity.
- Bluetooth: Features BLE 5 and Bluetooth mesh for short-range communication.
3.3 Integrierte Funktionen
The T-Display S3 Pro LR1121 includes several integrated peripherals:
- Motor Vibration: Bietet haptisches Feedback.
- RTC (Echtzeituhr): Maintains accurate timekeeping.
- Lautsprecher: Für Audioausgabe.
- Mikrofon: Für Audioeingang.
Video 3.1: Official video demonstrating the LILYGO T-Display S3 Pro LR1121 development board's features and functionality.
4. Wartung
4.1 Allgemeine Pflege
- Reinigung: Verwenden Sie ein weiches, trockenes Tuch, um das Gerät zu reinigen. Vermeiden Sie die Verwendung von flüssigen Reinigern oder Lösungsmitteln.
- Lagerung: Bewahren Sie das Gerät an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
- Physischer Schutz: The ABS+PC shell provides good protection, but avoid dropping the device or subjecting it to strong impacts.
4.2 Batteriepflege
- Laden: Charge the built-in 2000mAh Li-ion battery using a compatible USB-C power adapter (5V, 500mA recommended).
- Langzeitlagerung: If storing the device for an extended period, charge the battery to approximately 50% to prolong its lifespan. Avoid fully discharging or fully charging the battery for long-term storage.
5. Fehlerbehebung
If you encounter issues with your LILYGO T-Display S3 Pro LR1121, consider the following steps:
- Gerät lässt sich nicht einschalten: Ensure the battery is charged or the device is connected to a stable USB power source. Check the USB-C cable and port for damage.
- Anzeigeprobleme: If the display is blank or unresponsive, try restarting the device. Verify that the software is correctly loaded and initialized the display.
- Connectivity Problems (LoRa, Wi-Fi, Bluetooth): Check antenna connections for LoRa. For Wi-Fi and Bluetooth, ensure your software configuration is correct and that the device is within range of the network/peer.
- Softwarebezogene Probleme: Refer to the official GitHub repository for common issues, firmware updates, and community support. Many problems can be resolved by ensuring you are running the latest stable firmware or by consulting the project's documentation.
- Nicht reagierendes Gerät: If the device becomes unresponsive, perform a hard reset by disconnecting and reconnecting the power source.
6. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Marke | LILYGO |
| Modellname | LILYGO T-Display S3 Pro LR1121 |
| Konnektivitätstechnologie | Bluetooth, Wi-Fi, LoRa (Sub-G, 2.4G) |
| Im Lieferumfang enthaltene Komponenten | Bedienungsanleitung |
| Betriebssystem | FreeRTOS |
| Prozessormarke | Espressif (ESP32-S3R8 Dual-core LX7 microprocessor) |
| RAM-Speichertechnologie | LPDDR4 |
| Anzahl der Prozessoren | 1 |
| Anzahl USB-Anschlüsse | 1 (USB-C) |
| Anzeige | 2.33 inch Touch IPS TFT SPI LCD (Resolution: 222(H) RGB x 480(V), Drive Chip: ST7796) |
| LoRa Transceiver | LR1121 (LoRa/(G)FSK half-duplex, 150-960MHz, 2.4GHz, 2GHz S-band, 1.55GHz L-band) |
| Voice Communication Kit | Microphone (MP34DT05-A), Speaker (MAX98357A) |
| Other Integrated Features | Vibration Motor (PWM Motor), RTC (BM8563) |
| Batterie | Eingebauter 2000mAh Lithium-Ionen-Akku |
| Abmessungen (L x B x H) | 111 x 36 x 52 mm |
| UPC | 717382831206 |
7. Garantie und Support
7.1 Garantieinformationen
This product is covered by the manufacturer's standard warranty. Please refer to the LILYGO official webDie genauen Garantiebedingungen erfahren Sie auf der Website oder wenden Sie sich an den Kundendienst.
7.2 Technischer Support
For technical assistance, documentation, and community support, please visit the official LILYGO GitHub repository:
If you have any questions or suggestions regarding the product, you may also contact LILYGO directly through their official channels.