Bedienungsanleitung

Einführung

This manual provides essential instructions for the installation, operation, and maintenance of the Fricpart-105171 Washer Water Drain Pump. This component is designed as a replacement part compatible with Kenmore washing machine model 796.40311900. Please read this manual thoroughly before attempting any installation or repair to ensure safe and correct usage.

Sicherheitshinweise

• Always disconnect the washing machine from the power supply before attempting any service or installation.
• Vor Beginn der Arbeiten muss die Wasserzufuhr zur Waschmaschine abgestellt werden.
• Tragen Sie während der Installation geeignete persönliche Schutzausrüstung, wie z. B. Handschuhe und Augenschutz.
• Ensure all connections are secure and leak-free after installation to prevent water damage.
• Wenn Sie sich bei einem der Schritte unsicher sind, wenden Sie sich an einen qualifizierten Haushaltsgerätetechniker.

Packungsinhalt

Ihr Paket sollte folgende Artikel enthalten:

• One (1) Fricpart-105171 Washer Water Drain Pump

This image displays the Fricpart-105171 washer water drain pump. It features a black housing with a visible white three-bladed impeller inside a grey circular chamber. Mounting holes are visible on the black flange.

Setup und Installation

1. Vorbereitung: Before beginning, ensure the washing machine is completely disconnected from its power source and the water supply is turned off.
2. Zugang zur Pumpe: Refer to your specific Kenmore 796.40311900 washing machine's service manual for instructions on how to safely access and remove the existing drain pump. This typically involves removing panels or tilting the machine.
3. Kompatibilität überprüfen: Carefully compare the new Fricpart-105171 drain pump with the original part to confirm it is the correct replacement for your Kenmore 796.40311900 model. Appliance parts can appear similar, so verification is crucial.
4. Alte Pumpe ausbauen: Disconnect any electrical wiring and hoses attached to the old drain pump. Be prepared for residual water to drain out. Remove the mounting screws or clips securing the old pump.
5. Neue Pumpe einbauen: Position the new Fricpart-105171 drain pump in place and secure it with the appropriate mounting hardware.
6. Schläuche und Kabel anschließen: Reattach all hoses, ensuring they are clamped securely to prevent leaks. Reconnect the electrical wiring to the new pump. Double-check all connections.
7. Auf Dichtheit prüfen: Before fully reassembling the washer, slowly turn on the water supply and check for any leaks around the newly installed pump and hose connections. Address any leaks immediately.
8. Strom wiederherstellen: Once satisfied that there are no leaks, restore power to the washing machine.
9. Testbetrieb: Run a short drain cycle or a complete wash cycle to confirm the new drain pump is functioning correctly.

Bedienungsanleitung

The Fricpart-105171 Washer Water Drain Pump operates automatically as an integral part of your washing machine's cycle. It is designed to remove water from the wash tub during the drain and spin phases. No manual operation or intervention is required for the pump itself once correctly installed.

Wartung

Um die Langlebigkeit und den effizienten Betrieb Ihrer Ablaufpumpe zu gewährleisten, beachten Sie bitte die folgenden Wartungstipps:

• Regelmäßige Inspektion: Periodically inspect the drain pump and its connecting hoses for any signs of wear, cracks, blockages, or leaks.
• Schutt beseitigen: If your washing machine model includes a pump filter or coin trap, regularly clean it to prevent debris from obstructing the pump's impeller. Refer to your washer's user manual for filter location and cleaning instructions.
• Überladung vermeiden: Overloading the washing machine can put undue stress on the drain system, including the pump.

Fehlerbehebung

If you encounter issues with your washing machine's draining function, consider these common troubleshooting steps:

• Waschmaschine pumpt nicht ab:
  • Prüfen Sie den Abflussschlauch auf Knicke oder Verstopfungen.
  • Inspect the pump filter (if applicable) for debris.
  • Ensure the pump is receiving electrical power.
  • Verify the pump impeller is not obstructed by foreign objects.
• Ungewöhnliche Geräusche während des Abpumpvorgangs:
  • Foreign objects may be caught in the pump. Disconnect power and inspect the pump chamber.
  • Stellen Sie sicher, dass die Pumpe fest montiert ist und nicht gegen andere Bauteile vibriert.
• Leaks Around the Pump:
  • Prüfen Sie alle Schlauchverbindungen auf festen Sitz und ordnungsgemäße Abdichtung.
  • Inspect the pump housing for any cracks or damage.

If these steps do not resolve the issue, it may indicate a more complex problem requiring professional service.

Technische Daten

Garantie und Support

Warranty information for this replacement part may be available from the seller or manufacturer. Please refer to your purchase documentation or contact the point of sale for specific details regarding warranty coverage.

For technical assistance, installation guidance, or further inquiries, please contact the seller or manufacturer directly using the contact information provided with your purchase.