Jonsbo N10 Mini-ITX PC Case User Manual

1. Einleitung

The Jonsbo N10 Mini-ITX PC Case is designed for users seeking a compact, functional, and elegantly designed enclosure for minimalist PC systems. It is suitable for space-saving office PCs, quiet HTPCs (Home Theater Personal Computers), or compact NAS (Network Attached Storage) systems. This manual provides essential information for the proper assembly, operation, and maintenance of your Jonsbo N10 case.

Figure 1: Jonsbo N10 Mini-ITX PC Case in a typical desktop setup.

2. Sicherheitshinweise

• Vor dem Einbau oder Ausbau von Bauteilen muss immer die Stromversorgung von der Steckdose getrennt werden.
• Behandeln Sie alle Komponenten vorsichtig, um Schäden durch statische Elektrizität zu vermeiden. Erwägen Sie die Verwendung eines antistatischen Armbands.
• Kleinteile und Schrauben von Kindern fernhalten.
• Sorgen Sie für ausreichende Belüftung rund um das Gehäuse, um eine Überhitzung zu vermeiden.
• Versuchen Sie nicht, das Gehäuse oder seine Komponenten zu verändern, da dies zum Verlust der Garantie und zu Sicherheitsrisiken führen kann.

3. Packungsinhalt

Bitte überprüfen Sie, ob alle folgenden Artikel in Ihrem Paket enthalten sind:

• Jonsbo N10 Mini-ITX PC Case
• 2 x Pre-installed Cooling Fans
• Accessory box with screws and mounting hardware

Abbildung 2: Explosionsdarstellung view showing the main components of the Jonsbo N10 case.

4. Einrichtung und Installation

4.1 Komponentenüberschreitungview

The Jonsbo N10 case is designed for Mini-ITX motherboards and compact components. Familiarize yourself with the internal layout before beginning assembly.

Abbildung 3: Intern view of the Jonsbo N10 case, illustrating component placement.

4.2 Motherboard-Installation

1. Remove the side panels of the case.
2. Install your Mini-ITX motherboard into the designated area. Ensure the I/O shield is properly seated.
3. Befestigen Sie das Motherboard mit den mitgelieferten Schrauben.
4. Install your CPU and CPU cooler. Note that the maximum CPU cooler height supported is 38 mm. This case is optimized for CPUs with integrated graphics (iGPU) and does not support dedicated graphics cards.

4.3 Speicherinstallation

The Jonsbo N10 supports up to four 2.5-inch SSDs or HDDs.

1. Locate the 2.5-inch drive bays. These are typically found on a removable bracket or directly on the chassis.
2. Mount your 2.5-inch SSDs or HDDs onto the bracket using the provided screws.
3. Secure the bracket back into the case.

Figure 4: Installation process for 2.5-inch storage drives.

4.4 Installation der Stromversorgung

The case supports 1U-Flex power supplies up to 150 mm in length.

1. Identify the power supply mounting area, typically at the bottom of the case.
2. Slide the 1U-Flex power supply into its designated slot.
3. Befestigen Sie das Netzteil mit Schrauben von der Rückseite des Gehäuses.
4. Connect the necessary power cables to your motherboard and storage devices.

Figure 5: Power supply unit installation guide.

4.5 Lüfteranschlüsse

The Jonsbo N10 comes with two pre-installed cooling fans. Connect their power cables to the appropriate fan headers on your motherboard.

4.6 Kabelmanagement

Due to the compact nature of the case, careful cable management is crucial for optimal airflow and aesthetics. Route cables neatly using zip ties or Velcro straps where possible.

5. Bedienungsanleitung

Once all components are installed and secured, and all cables are connected:

1. Replace the side panels and secure them.
2. Schließen Sie Ihren Monitor, Ihre Tastatur, Ihre Maus und weitere Peripheriegeräte an.
3. Connect the power cable to the power supply and then to a wall outlet.
4. Press the power button on the front of the case to start your system.

Abbildung 6: Oben view of the Jonsbo N10, highlighting the power button and front panel.

6. Wartung

• Reinigung: Regularly clean the exterior of the case with a soft, dry cloth. For dust accumulation inside, use compressed air to gently clear vents and components. Ensure the system is powered off and unplugged before cleaning.
• Lüftercheck: Periodically check the pre-installed fans for dust buildup or unusual noises. Clean them as needed to maintain optimal airflow.
• Belüftung: Ensure that the case's ventilation holes are not obstructed to allow for proper heat dissipation.

7. Fehlerbehebung

• System schaltet sich nicht ein: Double-check all power connections, including the power supply to the wall, the motherboard 24-pin connector, and the CPU power connector. Ensure the power button cable is correctly connected to the motherboard.
• Übermäßiges Lüftergeräusch: While the case includes pre-installed fans, some users may find them audible. If fan noise is a concern, consider replacing the pre-installed fans with quieter aftermarket alternatives (e.g., Noctua fans). Ensure fans are free of dust and properly secured.
• Überhitzung: Verify that all fans are spinning correctly and that the case's ventilation is unobstructed. Ensure your CPU cooler is properly seated and making good contact with the CPU.
• USB-Anschlüsse funktionieren nicht: Check the internal USB 3.0 header connection from the front panel to the motherboard.

8. Spezifikationen

9. Garantie und Support

The Jonsbo N10 PC Case comes with a 2 Jahre Produktgarantie. For technical support, warranty claims, or further assistance, please contact your retailer or visit the official Jonsbo webBitte bewahren Sie Ihren Kaufbeleg für Garantiezwecke auf.