YOSUDA YBM-2

YOSUDA YBM-2 Magnetic Under Desk Cycling Bike User Manual

Model: YBM-2

Einführung

Thank you for choosing the YOSUDA YBM-2 Magnetic Under Desk Cycling Bike. This manual provides essential information for the safe assembly, operation, and maintenance of your new exercise equipment. Please read this manual thoroughly before using the product and retain it for future reference.

Wichtige Sicherheitsinformationen

  • Konsultieren Sie Ihren Arzt, bevor Sie mit einem Trainingsprogramm beginnen.
  • Halten Sie Kinder und Haustiere während des Gebrauchs vom Gerät fern.
  • Place the bike on a flat, stable surface. Do not use on uneven ground.
  • Vor jedem Gebrauch sicherstellen, dass alle Schrauben und Muttern fest angezogen sind.
  • Tragen Sie angemessene Sportkleidung und -schuhe.
  • Brechen Sie das Training sofort ab, wenn Ihnen schwindelig wird oder Sie Schmerzen verspüren.
  • Dieses Produkt ist nur für die Verwendung in Innenräumen bestimmt.
  • Maximum user weight capacity: Please refer to specifications.

Packungsinhalt

Bitte kreuzen Sie die Kästchen für die folgenden Komponenten an:

  • Hauptrahmen (1)
  • Front Stabilizer (1)
  • Rear Stabilizer (1)
  • Pedals (Left & Right) (2)
  • Widerstandsbänder (2)
  • Tool Kit (Wrenches, Screws, Washers) (1 set)
  • Benutzerhandbuch (1)
Image showing all components included in the YOSUDA YBM-2 package.

Figure 1: All components included in the YOSUDA YBM-2 package. Ensure all parts are present before assembly.

Montageanleitung

Follow these steps to assemble your YOSUDA YBM-2 cycling bike. It is recommended to have two people for easier assembly.

  1. Stabilisatoren anbringen:

    Befestigen Sie die vorderen und hinteren Stabilisatoren mit den mitgelieferten Schrauben und Unterlegscheiben am Hauptrahmen. Achten Sie auf einen festen Sitz.

    Image showing how to attach the front and rear stabilizers to the main frame.

    Figure 2: Securely attach the front and rear stabilizers to the main unit.

  2. Pedale installieren:

    Identify the left (L) and right (R) pedals. The left pedal screws counter-clockwise, and the right pedal screws clockwise. Thread them carefully into the crank arms and tighten with the wrench.

    Image showing the correct orientation and installation of left and right pedals.

    Figure 3: Correctly install the left (L) and right (R) pedals. Note the threading direction.

  3. Widerstandsbänder anbringen:

    Hook the resistance bands to the designated attachment points on the main frame. Ensure they are firmly secured.

    Image showing where to attach the resistance bands on the cycling bike.

    Figure 4: Attach the resistance bands to the designated points for full body engagement.

Bedienungsanleitung

Using Under a Desk

  • Place the YBM-2 on a non-slip surface under your desk.
  • Ensure there is enough clearance for your knees to pedal comfortably without hitting the underside of the desk.
  • Adjust your chair height for optimal pedaling posture.

Einstellen des magnetischen Widerstands

The YBM-2 features adjustable magnetic resistance. Locate the resistance knob on the front of the unit.

  • Durch Drehen des Knopfes im Uhrzeigersinn wird der Widerstand erhöht und das Training anspruchsvoller.
  • Durch Drehen des Knopfes gegen den Uhrzeigersinn wird der Widerstand verringert und das Training erleichtert.
Image showing the resistance adjustment knob on the YOSUDA YBM-2.

Abbildung 5: Mit dem Widerstandsknopf lässt sich die Trainingsintensität einfach einstellen.

Verwendung von Widerstandsbändern

The included resistance bands can be used for upper body exercises while cycling or separately.

  • Hold the handles of the bands and perform various arm and shoulder exercises (e.g., bicep curls, shoulder presses) while seated.
  • Ensure the bands are securely attached before use.

Wartung

  • Reinigung: Wischen Sie das Fahrrad mit Werbung abamp Nach jedem Gebrauch mit einem Tuch abwischen, um Schweiß und Staub zu entfernen. Keine Scheuermittel verwenden.
  • Inspektion: Überprüfen Sie regelmäßig alle Schrauben und Muttern auf festen Sitz. Ziehen Sie sie gegebenenfalls nach.
  • Lagerung: Store the bike in a cool, dry place away from direct sunlight and moisture.

Fehlerbehebung

Problem Mögliche Ursache Lösung
Die Pedale fühlen sich locker oder wackelig an. Die Pedale sind nicht vollständig festgezogen. Tighten pedals securely with the provided wrench. Remember left pedal is reverse threaded.
Ungewöhnliche Geräusche während des Betriebs. Lose Schrauben oder Bauteile. Check all assembly bolts and nuts and tighten them. Ensure the bike is on a flat surface.
Der Widerstand ändert sich nicht. Resistance knob not functioning correctly. Vergewissern Sie sich, dass sich der Widerstandsknopf frei drehen lässt. Sollte das Problem weiterhin bestehen, wenden Sie sich bitte an den Kundendienst.

Technische Daten

  • Modell: YBM-2
  • Marke: YOSUDA
  • Energiequelle: Pedalbetrieben (nicht elektrisch)
  • Material: Metall, Kunststoff
  • Empfohlene Verwendung: Innenbereich
  • Widerstandstyp: Magnetisch
  • UPC: 788362672225
  • (Note: Specific dimensions and weight capacity may vary slightly. Refer to product packaging for precise details.)

Garantie und Kundendienst

YOSUDA products are designed for durability and performance. For warranty information, please refer to the warranty card included with your purchase or visit the official YOSUDA website. If you encounter any issues or have questions regarding your YBM-2 cycling bike, please contact our customer support team:

Please have your model number (YBM-2) and purchase date ready when contacting support.

© 2023 YOSUDA. Alle Rechte vorbehalten.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.