Phanteks Eclipse G400A ATX Mid-Tower Computergehäuse – Benutzerhandbuch

Einführung

The Phanteks Eclipse G400A is a high-performance ATX Mid-Tower computer case designed for optimal airflow and component compatibility. Featuring a tempered glass side panel and pre-installed D-RGB fans, it offers both aesthetic appeal and efficient cooling. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Eclipse G400A case.

Figure 1: Phanteks Eclipse G400A ATX Mid-Tower Computer Case (White)

Installationshandbuch

1. Auspacken und Inspektion

Carefully remove the computer case from its packaging. Inspect the case for any signs of damage during transit. Ensure all accessories, including screws, cable ties, and the user manual, are present.

2. Komponenteninstallation

The Eclipse G400A is designed for easy installation of your PC components. Follow these general steps:

• Motherboard-Installation: Install your ATX motherboard onto the pre-installed standoffs. Ensure proper alignment and secure it with screws. The case supports rear-side connector mainboards for a cleaner build.
• Installation des Netzteils (PSU): Install your PSU into the dedicated compartment at the bottom rear of the case. The case supports PSUs up to 270mm in length.
• Installation des Speicherlaufwerks: The case supports 2x 2.5" SSDs and 2x 3.5" HDDs. Utilize the dedicated storage brackets and cable management tray for a clean setup.

Figure 2: Internal layout with highlighted storage and cable management areas

• Installation der Grafikkarte (GPU): Install your graphics card into the appropriate PCIe slot. The case supports large GPU cards and includes triple mid-plate 120mm fan locations for direct GPU cooling.
• Installation von Kühler und Lüfter: The case comes with 4x M25-140 Gen2 D-RGB fans pre-installed. It offers dedicated 360mm radiator support in the top without restrictions.

Figure 3: Top radiator support and pre-installed 140mm D-RGB fans

Figure 4: Dedicated 120mm fan positions for direct GPU cooling

3. Kabelmanagement

Utilize the dedicated cable management tool and Velcro ties provided to route and secure cables behind the motherboard tray. This ensures optimal airflow and a clean interior.

Bedienungsanleitung

1. Einschalten

After connecting all internal components and external peripherals, connect the power cable to your PSU and a wall outlet. Press the power button located on the top I/O panel of the case to power on your system.

Figure 5: Front I/O Panel Layout

2. RGB-Beleuchtungssteuerung

The pre-installed M25-140 Gen2 D-RGB fans feature addressable RGB lighting. Control the lighting effects through your motherboard's RGB software (if compatible with D-RGB/ARGB) or a dedicated Phanteks RGB controller (sold separately).

Wartung

1. Reinigung

Regular cleaning helps maintain optimal performance and extends the lifespan of your components.

• Staubfilter: The Eclipse G400A features ultra-fine performance mesh panels on the top, left, and right sides, acting as dust filters. Regularly remove and clean these filters using compressed air or a soft brush to prevent dust buildup.
• Exterieur: Wischen Sie die Außenflächen mit einem weichen, damp Mit einem Tuch abwischen. Vermeiden Sie scheuernde Reiniger oder Lösungsmittel.

Figure 6: Removable front mesh panel and dust filter for easy cleaning

Figure 7: Disassembled panels demonstrating airflow and access for cleaning

2. Optimierung des Luftstroms

Ensure cables are neatly managed to avoid obstructing airflow. Periodically check fan operation to ensure they are spinning freely and quietly.

Fehlerbehebung

• System lässt sich nicht einschalten:
  • Überprüfen Sie alle Stromanschlüsse, einschließlich der Verbindung des Netzteils zur Wandsteckdose, der Verbindung des Netzteils zum Motherboard (24-poliger Anschluss und 8-poliger CPU-Anschluss) sowie des Netzschalteranschlusses an der Vorderseite.
  • Stellen Sie sicher, dass sich der Netzteilschalter in der Position „EIN“ befindet.
• Lüfter drehen sich nicht / RGB-Beleuchtung leuchtet nicht:
  • Verify fan and RGB cables are correctly connected to the motherboard headers or a dedicated RGB controller.
  • Check motherboard BIOS/UEFI settings for fan control and RGB settings.
• Poor Airflow / High Temperatures:
  • Reinigen Sie alle Staubfilter und Lüfter.
  • Ensure proper cable management to avoid airflow obstruction.
  • Verify fan orientation (intake/exhaust) for optimal airflow path.

Technische Spezifikationen

Garantie und Support

Phanteks products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official Phanteks webBesuchen Sie die Website oder kontaktieren Sie direkt den Kundenservice. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

Weitere Unterstützung finden Sie auf der offiziellen Phanteks-Supportseite: www.phanteks.com/support.html