1. Einleitung
The Uwell Typhos Pod System Kit is a compact and high-performance vaping device designed for both RDL (Restricted Direct Lung) and MTL (Mouth-to-Lung) vaping styles. It integrates a powerful 2000mAh battery with a maximum output of 45W, a 6ml side-fill pod, and a clear 1.05-inch OLED screen for real-time information. This manual provides essential instructions for safe and effective use of your Typhos device.

Image 1.1: The Uwell Typhos Pod System Kit in Polar Black.
2. Produktüberschreitungview
2.1 Packungsinhalt
- Typhos Main Unit x1
- 0.3Ω Dual Mesh Coil 6ml Pod x1
- 0.6Ω Single Mesh Coil 6ml Pod x1
- USB-C-Ladekabel x1
- Benutzerhandbuch x1
- meihen Vape Band x1
2.2 Hauptmerkmale
- Batterie: Built-in 2000mAh for extended use.
- Ausgangsleistung: Einstellbar von 5 W bis 45 W.
- Pod-Kapazität: Large 6ml capacity reduces refill frequency.
- Filling Method: Convenient side-fill design.
- Laden: Fast USB-C charging, approximately 40 minutes for a full charge.
- Anzeige: 1.05-inch OLED screen for real-time information (battery, wattage, puff count).
- Leckprävention: CoreShield leak-proof technology.
- Luftstrom: Stepless adjustable airflow for precise draw control.
- Ausgabemodi: Two modes available: WAVE (energy-saving, stable output) and STORM (powerful burst).
- Spulenkompatibilität: Supports 0.3Ω Dual Mesh (25-45W), 0.6Ω Single Mesh (13-25W), and 0.8Ω Single Mesh (10-18W) coils.

Image 2.1: Illustration of the 6ml pod and 2000mAh battery capacity.

Image 2.2: Close-up of the Real Dual Mesh Coil, highlighting its structure and power output.

Image 2.3: Diagram illustrating the CoreShield leak prevention technology within the pod.

Image 2.4: The 1.05-inch OLED screen displaying device information.

Image 2.5: The stepless airflow control mechanism on the Typhos device.
3. Einrichtung
3.1 Aufladen des Geräts
Before first use, fully charge the Typhos device. Connect the provided USB-C charging cable to the charging port on the device and to a suitable power source. The OLED screen will indicate the charging status. A full charge takes approximately 40 minutes.
3.2 Installing the Pod
- Stellen Sie sicher, dass das Gerät ausgeschaltet ist.
- Insert the desired pod (0.3Ω or 0.6Ω) firmly into the device. It will magnetically snap into place.
3.3 Befüllen der Kapsel
- Nehmen Sie die Kapsel aus dem Gerät.
- Locate the side-fill port on the pod.
- Open the silicone plug and carefully fill the pod with your e-liquid.
- Close the silicone plug securely to prevent leaks.
- After filling a new pod or coil, wait at least 5-10 minutes before vaping to allow the coil to saturate with e-liquid. This prevents dry hits and extends coil life.

Image 3.1: Illustration of the side-fill mechanism and various compatible coil options for RDL and MTL vaping.
4. Bedienungsanleitung
4.1 Ein-/Ausschalten
Press the fire button 5 times rapidly to power the device on or off.
4.2 Einstellen von Wassertage
Use the adjustment buttons (usually located below the screen) to increase or decrease the wattage. The current wattage setting will be displayed on the 1.05-inch OLED screen. The device supports a wattagDer Bereich von 5 W bis 45 W.
4.3 Mode Selection (WAVE/STORM)
The Typhos offers two distinct output modes:
- WAVE Mode: Provides an energy-saving and stable output for consistent flavor.
- STORM Mode: Delivers a powerful burst for a more intense vaping experience.
Refer to the on-screen menu or user interface to switch between these modes.
4.4 Luftstromeinstellung
The device features stepless adjustable airflow. Locate the airflow control slider or ring on the device and adjust it to your preferred draw tightness, ranging from a tight MTL draw to a more open RDL draw.
4.5 Dampfen
Inhale through the mouthpiece to activate the auto-draw feature, or press and hold the fire button while inhaling. Release the button when you finish inhaling.
Video 4.1: Official Uwell TYPHOS POD System overview, wobei die wichtigsten Funktionen und die Bedienung demonstriert werden.
5. Wartung
5.1 Reinigung
- Regularly clean the pod and the device's contact points with a dry cloth or cotton swab to prevent e-liquid buildup.
- Ensure no e-liquid enters the charging port or airflow channels.
5.2 Zündspulenwechsel
Replace the coil when you notice a burnt taste, reduced vapor production, or diminished flavor. To replace:
- Nehmen Sie die Kapsel aus dem Gerät.
- Pull out the old coil from the bottom of the pod.
- Insert a new coil firmly into the pod.
- Refill the pod with e-liquid and allow it to sit for 5-10 minutes before use.
5.3 Bewährte Verfahren beim Laden
- Verwenden Sie ausschließlich das mitgelieferte USB-C-Kabel.
- Vermeiden Sie ein Überladen oder vollständiges Entladen des Akkus, um seine Lebensdauer zu verlängern.
5.4 Speicherung
Lagern Sie das Gerät an einem kühlen, trockenen Ort, geschützt vor direkter Sonneneinstrahlung und extremen Temperaturen. Außerhalb der Reichweite von Kindern und Haustieren aufbewahren.
6. Fehlerbehebung
6.1 No Vapor / Weak Vapor
- Batterie prüfen: Stellen Sie sicher, dass das Gerät aufgeladen ist.
- Check Pod Connection: Re-seat the pod firmly.
- Check E-liquid Level: Refill if low.
- Spule prüfen: Replace the coil if it's old or burnt.
- Überprüfen Sie Wattage: Wasser einstellentage to the recommended range for your coil.
6.2 Leaking
- Check Silicone Plug: Ensure the side-fill plug is securely closed.
- Check Coil Installation: Make sure the coil is properly seated.
- Überfüllung vermeiden: Do not overfill the pod.
- Proper Priming: Ensure the coil is adequately primed before first use.
6.3 Device Not Turning On / Charging
- Ladekabel prüfen: Use the original USB-C cable and ensure it's properly connected.
- Ladeanschluss reinigen: Remove any debris from the charging port.
- Aus- und Wiedereinschalten: Try turning the device off and on again (5 clicks).
7. Spezifikationen
| Batteriekapazität | 2000 mAh (eingebaut) |
| Ausgangsleistung | 5W - 45W (Adjustable) |
| Pod-Kapazität | 6 ml |
| Ladeanschluss | Typ C |
| Anzeige | 1.05-Zoll-OLED-Bildschirm |
| Maße | 11.02 x 3.16 x 2.05 cm |
| Gewicht | 200g |
| Kompatible Spulen | 0.3Ω Dual Mesh (25-45W), 0.6Ω Single Mesh (13-25W), 0.8Ω Single Mesh (10-18W) |
8. Garantie und Support
This product includes a meihen vape band and a security code to verify its authenticity. For warranty claims or technical support, please refer to the contact information provided by your retailer or the official Uwell webBewahren Sie Ihren Kaufbeleg für eventuelle Garantieanfragen auf.
Note: This product does not contain nicotine or e-liquid.