Wichtige Sicherheitshinweise
- Lesen Sie vor der Verwendung alle Anweisungen sorgfältig durch.
- This appliance is for indoor aquarium use only.
- Stellen Sie sicher, dass die Stromversorgungslautstärketage matches the rating label on the filter.
- Vor Wartungs- und Reinigungsarbeiten sowie bei Nichtgebrauch muss der Filter immer vom Stromnetz getrennt werden.
- Der Filter darf nicht in Betrieb genommen werden, wenn das Kabel oder der Stecker beschädigt ist, wenn er Fehlfunktionen aufweist oder auf irgendeine Weise beschädigt wurde.
- To avoid electric shock, do not immerse the power plug or cord in water or other liquids.
- Bewahren Sie den Filter außerhalb der Reichweite von Kindern auf.
- Ensure the filter is securely attached to the aquarium before operation.
- Not suitable for framed aquariums. Please check your aquarium type before installation.
Packungsinhalt
Bitte überprüfen Sie beim Öffnen der Verpackung, ob alle Komponenten vorhanden und unbeschädigt sind.
- Filter Unit (Main body with motor)
- Einlassrohrbaugruppe
- Auslassdüse
- Aktivkohlefilter Baumwolle
- Overflow Prevention Cotton
- Sponge Protection Cover for Inlet
- Adjustable Hanging Hook (5-15mm)
Installationshandbuch
- Assemble the Inlet Pipe: Connect the various sections of the inlet pipe and attach the sponge protection cover to the bottom.
Figure 2: Illustration of assembling the inlet pipe components. - Filtermedien installieren: Place the activated carbon filter cotton and overflow prevention cotton into the filter compartment. Ensure they are correctly seated.
Figure 3: Diagram showing the placement of filter media within the unit. - Am Aquarium befestigen: Securely hang the filter unit onto the edge of your aquarium using the adjustable hanging hook. The hook is designed for tank glass thickness between 5-15mm. Note: This filter is not compatible with aquariums that have a frame around the edge.
Figure 4: The filter unit securely attached to the aquarium rim, showing the adjustable hook. - Prime the Filter: Before plugging in, add water to the filter compartment until it is full. This will initiate the self-priming process.
Figure 5: Adding water to the filter compartment to prime it before starting. - Strom anschließen: Plug the filter into a suitable power outlet. The filter should start operating automatically.
Video 1: Demonstrates the setup and initial operation of a hygger aquarium filter, including connecting the power. This video shows the filter starting and circulating water.
Bedienungsanleitung
Einstellung des Wasserdurchflusses
The filter features an adjustable knob on the top, allowing you to control the water flow rate up to a maximum of 400L/H. This is beneficial for aquariums with fish that prefer gentler currents, such as Medaka, Betta, or Ryukin goldfish.
Oil Film Removal Function
The filter is equipped with an oil film removal function to maintain a clear water surface, enhancing the viewing experience of your aquarium inhabitants.
Oxygen Supply (Aeration)
The design of the filter, where water is drawn up and then falls back into the tank, also provides aeration, effectively circulating oxygen throughout the aquarium. This creates an ideal environment for fish and shrimp.
Wartung
Regular maintenance is crucial for optimal filter performance and water quality. Always unplug the filter before performing any maintenance.
Cleaning Filter Media
- The filter utilizes multiple media types, including activated carbon filter cotton and overflow prevention cotton.
- These media can be replaced individually as needed.
- Rinse the filter media with old aquarium water during water changes to preserve beneficial bacteria. Avoid using tap water directly, as chlorine can harm bacteria.
Cleaning the Filter Unit
- Periodically disassemble the filter unit to clean the impeller and internal components.
- Use a soft brush to remove any accumulated debris or algae.
- Ensure all parts are reassembled correctly before restarting the filter.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Filter not starting/no water flow |
|
|
| Reduzierter Wasserdurchfluss |
|
|
| Übermäßiger Lärm |
|
|
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | HG238-JP |
| Größe | M |
| Maximaler Durchfluss | 400 Liter/Stunde |
| Applicable Tank Volume | Ca. 20-38 L |
| Applicable Tank Length | Bis zu 50 cm |
| Applicable Tank Edge Thickness | 5-15 mm (unframed tanks only) |
| Geräuschpegel | Unter 25 dB |
| Wassertyp | Freshwater and Saltwater |
| Merkmale | Adjustable Water Flow, Oil Film Removal, Multi-stage Filtration, Oxygen Supply, Anti-suction Sponge Cover |
Garantie und Support
For warranty information and customer support, please refer to the contact details provided with your purchase or visit the official hygger webWebsite.
Bewahren Sie Ihren Kaufbeleg als Kaufnachweis für Garantieansprüche auf.