DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. Sicherheitshinweise

WARNING: Always read and understand all safety warnings and instructions before operating this tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Tragen Sie beim Betrieb dieses Produkts stets eine Schutzbrille oder eine Schutzbrille mit Seitenschutz und, falls erforderlich, einen Vollgesichtsschutz.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. Produktüberschreitungview

Packungsinhalt

• Kabelloser Brad-Nagler
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• 2.0 Ah Li-Ionen-Akku
• 1-Stunden-Schnellladegerät
• Tragetasche
• Bedienungsanleitung

Werkzeugkomponenten

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

Abmessungen und Gewicht

Figure 2: Physical dimensions and weight of the nailer (without battery).

• Länge: 10.83 Zoll (27.5 cm)
• Breite: 9.45 Zoll (24 cm)
• Weight: 6.19 lbs (without battery)

3. Einrichtung

Einlegen der Batterie

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. Richten Sie den Akku an dem Akkufach des Werkzeugs aus.
3. Schieben Sie die Batterie in den Schlitz, bis sie hörbar einrastet.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. Drücken Sie den Entriegelungsknopf und ziehen Sie die Magazinabdeckung heraus.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. Schließen Sie die Magazinabdeckung, bis sie in den Entriegelungsknopf einrastet.

Nagel Viewäh Fenster

Der Nagel viewer window allows you to quickly check the fastener level. When the window shows Rot, it indicates the magazine is without nails. When it shows Schwarz, it indicates the magazine contains nails.

4. Bedienungsanleitung

Feuermodi

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Figure 4: Firing mode selection switch.

Einzelfeuermodus

• Shift the mode switch to the linke Seite (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

Kontaktfeuermodus

• Shift the mode switch to the rechte Seite (contact firing icon).
• Drücken Sie den Auslöser.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

Notiz: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

Tiefeneinstellung

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

LED-Beleuchtung

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

LED-Anzeige

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• Rot an: Schwache Batterie.
• Rotes Blinken: Nails/staples are jammed.
• Grün an: No nails/staples in the magazine.
• Grün blinkend: Überhitzen.
• Licht aus: Normaler Betriebszustand.

Offizielles Produktvideo

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. Wartung

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

Batteriepflege

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• Lagern Sie die Batterie an einem kühlen, trockenen Ort, geschützt vor direkter Sonneneinstrahlung und extremen Temperaturen.

6. Fehlerbehebung

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. Spezifikationen

Kompatible Befestigungselemente

Figure 9: Compatible nail and staple types.

8. Garantie und Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH webBitte halten Sie Ihre Modellnummer (024009) und die Kaufdetails bereit, wenn Sie den Support kontaktieren.