Redodo Bluetooth 24V 50Ah LiFePO4 Battery and 29.2V 20A Charger Instruction Manual

1. Produktüberschreitungview

The Redodo Bluetooth 24V 50Ah LiFePO4 Battery is a smart lithium iron phosphate battery designed for various deep cycle applications, including trolling motors, marine use, RVs, fishing finders, solar systems, and off-grid power. It features integrated Bluetooth monitoring and an upgraded Battery Management System (BMS) for enhanced safety and performance. This package also includes a dedicated 29.2V 20A LiFePO4 battery charger.

Hauptmerkmale:

• Bluetooth Monitoring & Control: Track charge status, cycles, temperature, and battery health via a mobile application. Manage discharge and power-off functions remotely.
• Kompakt und leicht: Weighing approximately 21.14 lbs, this battery offers a lightweight solution for various applications.
• Optimized for 24V Trolling Motors: Designed to power trolling motors with up to 100 lbs of thrust, providing continuous power with a 60A discharge current.
• Schnelles Laden: The included 29.2V 20A charger can fully charge a 24V 100Ah LiFePO4 battery in approximately 5 hours.
• Erweiterter BMS-Schutz: Equipped with safeguards against overcharge, over-discharge, short circuits, over-current, over-temperature, and low-temperature cut-off.
• Lange Lebensdauer: Built with Grade A cells, offering over 4,000 cycles at full depth of discharge.
• Erweiterbare Kapazität: Can be scaled up to 10.24kWh (max 4P2S) for increased power needs.

Image: Redodo 24V 50Ah LiFePO4 Battery powering a trolling motor on a boat, highlighting its application.

2. Sicherheitshinweise

Read all safety instructions before operating the battery and charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

Allgemeine Sicherheitsvorkehrungen:

• Die Batterie darf nicht auseinandergenommen, verändert oder durchstochen werden.
• Halten Sie die Batterie von Feuer, Wärmequellen und direkter Sonneneinstrahlung fern.
• Tauchen Sie die Batterie nicht in Wasser oder andere Flüssigkeiten.
• Use only the specified Redodo 29.2V 20A charger or a compatible LiFePO4 charger with a lithium activation function.
• Sorgen Sie während des Ladevorgangs und des Betriebs für ausreichende Belüftung.
• Tragen Sie beim Umgang mit der Batterie geeignete persönliche Schutzausrüstung (PSA), wie z. B. Handschuhe und Augenschutz.
• Vermeiden Sie einen Kurzschluss der Batteriepole.
• Außerhalb der Reichweite von Kindern aufbewahren.

Charger Safety Functions:

• Kurzschlussschutz am Ausgang
• Übertemperaturschutz
• Ausgang Over-Voltage-Schutz
• Schutz vor Verpolung

Image: Diagram illustrating the safety protection functions integrated into the 29.2V 20A charger.

3. Lieferumfang

Upon unpacking your Redodo battery and charger, please verify that all items listed below are present and in good condition:

• Redodo Bluetooth 25.6V 50Ah LiFePO4-Akku mit Untertemperaturabschaltung
• Insulating Caps for Terminal Bolts
• M8- 5/8"-Anschlussschrauben
• Redodo 29.2V 20A LiFePO4 Battery Charger

Image: The Redodo 24V 50Ah LiFePO4 battery and its accompanying 29.2V 20A charger.

4. Einrichtung und Installation

Erstaktivierung:

Redodo Bluetooth batteries are shipped in a powered-off state to ensure safety during transit. To activate the battery, connect it to a compatible LiFePO4 charger (such as the included 29.2V 20A charger) or an MPPT solar charge controller that has a lithium activation function. The battery will activate automatically upon receiving a charge.

Anschließen des Akkus:

1. Ensure all loads are disconnected from the battery before making connections.
2. Connect the positive (+) terminal of the battery to the positive (+) terminal of your application (e.g., trolling motor, inverter).
3. Verbinden Sie den Minuspol (-) der Batterie mit dem Minuspol (-) Ihrer Anwendung.
4. Secure all connections tightly using the provided M8- 5/8" terminal bolts and insulating caps. Loose connections can cause overheating and damage.
5. If connecting multiple batteries in series or parallel, refer to the 'Expandable Capacity' section for specific wiring diagrams and safety guidelines.

Bluetooth-Pairing:

Download the official Redodo app from your smartphone's app store. Ensure your battery is activated and within Bluetooth range. Open the app and follow the on-screen instructions to pair with your battery. This will enable real-time monitoring and control features.

Image: The Redodo battery with a smartphone showing the Bluetooth monitoring interface for capacity, voltage, and state of charge.

5. Bedienungsanleitung

Laden des Akkus:

Use the provided Redodo 29.2V 20A LiFePO4 battery charger. Connect the charger to a suitable power outlet, then connect the charger's output to the battery terminals. The charger features an indicator light:

• Rot orange: Laden
• Grün: Fully Charged / Standby

The charger will automatically stop charging when the battery is full. Charging time for a 24V 100Ah battery is approximately 5 hours with the 20A charger.

Image: The Redodo 29.2V 20A LiFePO4 battery charger, detailing its connection and indicator light.

Discharging and Application:

The battery is designed for deep cycle applications. It can deliver a continuous discharge current of 60A, suitable for high-power devices like trolling motors up to 100 lbs of thrust. Monitor battery status via the Bluetooth app to ensure optimal performance and avoid over-discharge.

Image: The Redodo battery in a marine application, demonstrating its capability for 24V trolling motors with up to 100 lbs of thrust.

Niedertemperaturschutz:

The battery features a low-temperature cut-off protection. This ensures the battery's longevity and safety by preventing charging or discharging outside safe temperature ranges:

• Below -4°F (-20°C): Discharging stops.
• Below 32°F (0°C): Das Laden ist deaktiviert.
• Above 41°F (5°C): Charging resumes.

Image: Visual representation of the battery's low-temperature cutoff protection, indicating temperature thresholds for discharging and charging.

6. Wartung

Durch sachgemäße Wartung werden die Langlebigkeit und Leistungsfähigkeit Ihrer Redodo LiFePO4-Batterie sichergestellt.

• Regelmäßige Inspektion: Periodically check battery terminals for corrosion or loose connections. Clean terminals with a wire brush if necessary and ensure they are securely fastened.
• Reinigung: Keep the battery clean and dry. Wipe down the battery case with a damp Tuch. Verwenden Sie keine aggressiven Chemikalien oder Lösungsmittel.
• Lagerung: If storing the battery for an extended period, ensure it is charged to approximately 50-70% State of Charge (SOC). Store in a cool, dry place, away from direct sunlight and extreme temperatures. Disconnect all loads.
• Tiefentladung vermeiden: While the BMS protects against over-discharge, it is best practice to recharge the battery before it reaches critically low levels to maximize cycle life.

7. Fehlerbehebung

Sollten Sie Probleme mit Ihrem Redodo-Akku oder -Ladegerät haben, beachten Sie bitte die folgenden gängigen Schritte zur Fehlerbehebung:

Batterie wird nicht aktiviert:

• Ensure the battery is connected to a compatible LiFePO4 charger or MPPT with a lithium activation function. The battery is shipped in a powered-off state and requires an initial charge to activate.
• Check all connections for proper polarity and tightness.

Akku lädt nicht:

• Verify the charger is properly plugged into a working power outlet and the battery.
• Check the charger's indicator light. If it's green, the battery might be fully charged or in standby. If it's off, check the power supply.
• Ensure the ambient temperature is above 32°F (0°C), as the battery has a low-temperature charging cut-off.
• Inspect the charger and battery cables for any damage.

Battery Not Discharging / Low Power Output:

• Check the battery's State of Charge (SOC) via the Bluetooth app. Recharge if the SOC is low.
• Ensure the ambient temperature is above -4°F (-20°C), as the battery has a low-temperature discharging cut-off.
• Verify that the load (e.g., trolling motor) is not exceeding the battery's maximum continuous discharge current (60A).
• Check for loose or corroded connections at the battery terminals and the load.

Probleme mit der Bluetooth-Konnektivität:

• Ensure the battery is activated and powered on.
• Make sure your smartphone's Bluetooth is enabled and you are within close proximity to the battery.
• Restart the Redodo app and try pairing again.
• Sollten die Probleme weiterhin bestehen, versuchen Sie, Ihr Smartphone neu zu starten.

For persistent issues not covered here, please contact Redodo customer support.

8. Spezifikationen

Image: Dimensions of the Redodo 24V 50Ah LiFePO4 battery, indicating its compact size.

Bild: Detailliert view of the upgraded BMS, highlighting its multi-protection features for peak performance and safety.

9. Garantie und Support

Garantieinformationen:

The Redodo Bluetooth 24V 50Ah LiFePO4 Battery comes with a 5 Jahr Garantie Diese Garantie gilt ab Kaufdatum und deckt Material- und Verarbeitungsfehler bei normalem Gebrauch ab. Bitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

The warranty does not cover damage caused by misuse, neglect, improper installation, unauthorized modifications, or natural disasters.

Kundendienst:

For technical assistance, warranty claims, or any questions regarding your Redodo product, please contact our customer support team. We aim to provide a 24-hour response to inquiries.

• WebWebsite: Visit the official Redodo webWebsite mit Supportressourcen und Kontaktinformationen.
• E-Mail: Beachten Sie die Angaben auf Ihrer Produktverpackung oder die offizielle Kennzeichnung. webWebsite für die Support-E-Mail-Adresse.

Please have your model number (Bluetooth 24V 50Ah LiFePO4 Battery) and purchase date ready when contacting support.