Einführung
The Strymon PCH is an advanced stereo active direct interface designed for musicians and audio professionals. It provides a transparent signal path for instruments like guitars, keyboards, and synthesizers, allowing direct connection to mixing consoles or recording interfaces. The PCH also features a studio-grade headphone amplifier for personal monitoring and silent practice.
This manual provides detailed instructions for setting up, operating, and maintaining your Strymon PCH to ensure optimal performance and longevity.
Hauptmerkmale
- Advanced Direct Interface: Offers a transparent stereo active direct interface for various instruments.
- Console-Quality Headphone AmpReiniger: Eingebauter Kopfhörer amp for detailed stereo monitoring or silent practice, capable of driving high-impedance headphones.
- Virtually Unclippable Design: Internal power circuit boosts standard 9V DC to 24V for massive headroom.
- Flexible Pro Outputs: Supports stereo or dual mono operation with stereo XLR outputs, switchable mic/line level, and ground lift. Stereo Thru outputs include a mono sum ability.
- Robuste Bauweise: Housed in a durable extruded aluminum chassis for silent operation and flat frequency response.
Aufstellen
Follow these steps to set up your Strymon PCH:
- Stromanschluss: Connect a standard 9V DC power supply (center-negative) to the 9VDC input jack on the PCH. The unit will internally boost this to 24V for optimal performance.
- Instrumenteneingang: Connect your instrument (guitar, synth, keyboard, etc.) to the IN (Left/Right) 1/4" input jacks. For mono instruments, use the Left IN jack.
- Thru Outputs: Use the THRU (Left/Right) 1/4" jacks to send the input signal to other devices, such as an amplifier or pedalboard. The THRU outputs can be summed to mono using the 'sum stereo' switch if desired.
- XLR-Ausgänge: Connect the LEFT OUT and RIGHT OUT XLR jacks to your mixing console, audio interface, or PA system.
- Kopfhöreranschluss: Plug your headphones into the PHONES 1/4" stereo jack for personal monitoring.

Bild: Überview of the Strymon PCH showing input, thru, headphone, and output connections.

Image: Close-up of the PCH rear panel, highlighting the IN, THRU, PHONES, and 9VDC power connections.
Betrieb
Understanding the controls of your PCH is essential for optimal sound routing and monitoring.
- PHONES Volume Knob: Adjusts the output level for the connected headphones. Rotate clockwise to increase volume, counter-clockwise to decrease.
- SUM (THRU) Switch: This switch affects the THRU outputs.
- Bei Einstellung auf 'sum', the Left and Right input signals are summed to mono and sent to both THRU outputs.
- Bei Einstellung auf 'stereo', the Left input goes to the Left THRU, and the Right input goes to the Right THRU.
- LEVEL (XLR Outputs) Switch: Located near the XLR outputs, this switch selects the output level for the XLR connections.
- Eingestellt auf 'mic' for connecting to microphone preamps or inputs expecting a mic-level signal.
- Eingestellt auf 'line' for connecting to line-level inputs on mixers or audio interfaces.
- GROUND (XLR Outputs) Lift Switch: This switch helps eliminate hum and noise caused by ground loops.
- Eingestellt auf 'lift' to disconnect the ground connection between the PCH and the connected device via XLR.
- Eingestellt auf 'gnd' (ground) for a standard ground connection. If you experience hum, try switching to 'lift'.

Image: Close-up of the PCH XLR outputs, showing the LEVEL (mic/line) and GROUND (lift/gnd) switches.

Bild: Oben view of the Strymon PCH, illustrating the overall layout of controls and connections.
Wartung
The Strymon PCH is designed for durability and requires minimal maintenance.
- Reinigung: Reinigen Sie die Außenseite des Geräts mit einem weichen, trockenen Tuch. Vermeiden Sie scheuernde Reiniger oder Lösungsmittel.
- Lagerung: Store the PCH in a dry environment, away from extreme temperatures and direct sunlight.
- Verbindungen: Überprüfen Sie regelmäßig alle Kabelverbindungen auf festen Sitz und Anzeichen von Verschleiß.
- Stromversorgung: Always use a compatible 9V DC (center-negative) power supply. Using an incorrect power supply can damage the unit.
Fehlerbehebung
If you encounter issues with your Strymon PCH, refer to the following common troubleshooting steps:
| Problem | Mögliche Ursache/Lösung |
|---|---|
| Keine Tonausgabe |
|
| Brumm- oder Summengeräusch |
|
| Low Headphone Volume |
|
| Verzerrter Klang |
|
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | PCH |
| Artikelgewicht | 1.2 Pfund (0.54 kg) |
| Technische Daten | 4.88" x 2.97" x 1.94" (12.4 x 7.5 x 4.9 cm) |
| Konnektivitätstechnologie | XLR, 6,35-mm-TRS |
| Anzahl der Kanäle | 4 (Stereo In, Stereo Thru, Stereo Out) |
| Kompatible Geräte | Guitar, Keyboard, Synthesizer, Pedalboards, Personal Computer, Portable Media Player, Speaker |
| Materialtyp | Extrudiertes Aluminium |
| Strombedarf | 9V DC (center-negative) |
| Internes Betriebsvolumentage | 24V (internally boosted) |
Garantie und Support
Informationen zur Garantie und zum technischen Support finden Sie auf der offiziellen Strymon-Website. webBesuchen Sie die Website oder kontaktieren Sie direkt den Kundenservice. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
Strymon Official WebWebsite: www.strymon.net