VANNECT UKX390AS

VANNECT 4-in-1 Walking Pad Treadmill

Model: UKX390AS

1. Wichtige Sicherheitshinweise

Before using the VANNECT Walking Pad Treadmill, please read and understand all instructions. Keep this manual for future reference.

2. Aufbau und Montage

The VANNECT Walking Pad Treadmill is designed for minimal setup, arriving 100% assembled and ready for use.

  1. Auspacken der Box: Nehmen Sie die Laufunterlage vorsichtig aus der Verpackung.
  2. Positionieren Sie das Laufband: Place the treadmill on a flat, stable surface in your desired exercise area, ensuring adequate clearance around it.
  3. Strom anschließen: Stecken Sie das Netzkabel in eine geerdete Steckdose.
  4. Einschalten: Locate the main power switch, usually at the front or rear of the unit, and turn it on. The LED display should illuminate.
Image showing the three steps for setting up the VANNECT Walking Pad: Unpack the box, get the treadmill ready, and hop on the treadmill and go.

Figure 2.1: Simple 3-step setup process for the walking pad.

3. Bedienungsanleitung

3.1. Ein- und Ausschalten

3.2. Remote Control and LED Display

The walking pad is controlled via a portable magnetic remote control. The integrated LED display shows key workout metrics.

Image of the walking pad's LED display showing distance, speed, time, and calories, along with the wireless remote control.

Figure 3.1: Remote control and LED display showing workout metrics.

3.3. Exercise Modes and Incline

The walking pad offers various modes and an adjustable incline to customize your workout.

Image illustrating different exercise modes: Climbing Mode (3-6 km/h), Exercise at Work (1-3 km/h), Walking Mode (4-6 km/h), and Running Mode (7-10 km/h).

Figure 3.2: Various exercise modes for different activities.

4. Wartung

Regelmäßige Wartung gewährleistet die Langlebigkeit und optimale Leistung Ihrer Laufunterlage.

Image showing the compact storage options for the walking pad: under a sofa, under a bed, and highlighting the pulley design for easy movement.

Figure 4.1: Portable design with wheels for easy storage under furniture.

5. Fehlerbehebung

If you encounter issues with your VANNECT Walking Pad, refer to the following common problems and solutions:

ProblemMögliche UrsacheLösung
Das Laufband lässt sich nicht einschalten.Netzkabel nicht angeschlossen; Hauptschalter ausgeschaltet; Sicherungsautomat ausgelöstEnsure cord is securely plugged in; Turn on main power switch; Reset circuit breaker
Das Laufband rutscht durch oder stopptBelt tension too loose; Motor overloadAdjust belt tension (refer to full manual); Reduce user weight or speed
Ungewöhnliche Geräusche während des BetriebsLoose components; Lack of lubrication; Belt rubbingCheck and tighten all visible screws; Lubricate running belt; Adjust belt alignment
Fernbedienung reagiert nichtLeere Batterien; StörungenReplace remote control batteries; Ensure no obstructions between remote and treadmill

If the problem persists, please contact VANNECT customer support.

6. Spezifikationen

ModellnummerUKX390AS
Motorleistung2.75 PS
Geschwindigkeitsbereich1 - 10 km/h
Maximales Benutzergewicht150 kg
Neigung9 % (Manuelle Anpassung)
Abmessungen der Lauffläche100 cm x 40 cm
Gesamtabmessungen (L x B x H)116 x 50.5 x 12.5 cm
Geräuschpegel< 30 dB
MaterialKohlenstoffstahl
Besondere MerkmaleLED Display, Wireless Remote Control, 5-Layer Anti-slip Belt, 8 Silicone Shock Absorbers, 2 Shock-absorbing Pads, 12 HIIT Programs
Image comparing VANNECT's specifications (2.75PS Motor, 330LBS Capacity, 10 Km/h Speed, Quiet Noise) against 'OTHER' brands.

Figure 6.1: Key performance specifications of the walking pad.

Image illustrating the 5-layer anti-slip band and 10 integrated shock absorption points, with a person's legs on the treadmill.

Figure 6.2: Detail of the 5-layer anti-slip belt and shock absorption system.

7. Garantie und Support

VANNECT is committed to providing quality products and customer satisfaction.