ECONTROLLY Replacement Remote Control User Manual

Einführung

This manual provides instructions for the ECONTROLLY Replacement Remote Control, designed for use with various smart home theater projectors. Please read this manual carefully before using your remote control to ensure proper operation and to maximize its lifespan.

Kompatible Projektormodelle:

• Yaber V12 / U12
• DBPOWER G01
• VOPLLS ​​M10
• WiMiUS K9
• TOPTRO X9
• Wanbo TT
• MECOOL KP2
• Blitzwolf BW-V6

Aufstellen

1. Einlegen der Batterie

The remote control requires AAA ALKALINE batteries for operation. Rechargeable batteries are not supported.

1. Suchen Sie die Batteriefachabdeckung auf der Rückseite der Fernbedienung.
2. Schieben Sie die Abdeckung in Pfeilrichtung auf.
3. Insert two (2) AAA ALKALINE batteries, ensuring the positive (+) and negative (-) terminals match the markings inside the compartment.
4. Schließen Sie den Batteriefachdeckel fest.

Hinweis: Batterien sind nicht im Lieferumfang der Fernbedienung enthalten.

2. Pairing with Your Projector

This remote control requires pairing with your projector before its first use. Follow these steps to establish a connection:

1. Ensure your projector is powered on and within range of the remote control.
2. Simultaneously press and hold the "OK" Knopf und der "Vol-" (Volume Down) button on the remote control.
3. Continue holding both buttons for approximately 3 to 10 seconds.
4. Release the buttons once the pairing indicator (if available on your projector or remote) confirms a successful connection, or when the remote begins to control the projector.

If pairing fails, ensure batteries are correctly installed and try again. Refer to your projector's manual for specific pairing instructions if issues persist.

Bild: Vorderseite view of the ECONTROLLY Replacement Remote Control, showing all buttons including OK and Volume Down for pairing.

Bedienung der Fernbedienung

The remote control features a standard layout for easy navigation and control of your smart projector. Below is a general overview von gängigen Tastenfunktionen:

Bild: Abgewinkelt view of the remote control, highlighting the button layout for operation.

• Ein-/Ausschalter (rot): Schaltet den Projektor ein oder aus.
• Stummschalttaste: Schaltet die Audioausgabe stumm oder hebt die Stummschaltung auf.
• Navigationsfeld (Hoch, Runter, Links, Rechts): Navigates through menus and selections.
• OK-Taste: Bestätigt die Auswahl oder ruft Menüs auf.
• Zurück-SchaltflächeKehrt zum vorherigen Bildschirm oder Menü zurück.
• Home-Taste: Returns to the projector's main home screen.
• Lautstärke erhöhen (+) / Lautstärke verringern (-): Regelt die Lautstärke.
• F+ / F- Buttons: May control focus or other projector-specific functions. Refer to your projector's manual.
• Nummernblock (0-9): For direct input of channels or other numerical data.
• USB-Taste: Likely switches input to a USB source.
• Dedicated App Buttons (NETF, prim video, YouT b, OPEN BROWSER): Provides quick access to popular streaming services and the web Browser.

Specific button functionalities may vary slightly depending on your projector model. Consult your projector's user manual for detailed information.

Wartung

Um die Langlebigkeit und optimale Leistung Ihrer Fernbedienung zu gewährleisten, beachten Sie bitte folgende Wartungshinweise:

• Reinigung: Use a soft, dry cloth to wipe the surface of the remote control. Do not use liquid cleaners, aerosols, or abrasive materials, as these can damage the remote.
• Batteriewechsel: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA ALKALINE batteries.
• LagerungBewahren Sie die Fernbedienung an einem kühlen, trockenen Ort ohne direkte Sonneneinstrahlung, extreme Temperaturen und hohe Luftfeuchtigkeit auf. Wenn die Fernbedienung längere Zeit nicht benutzt wird, entfernen Sie die Batterien, um ein Auslaufen zu verhindern.
• Vermeiden Sie Stürze: Protect the remote from physical impact. Dropping the remote can damage internal components.

Fehlerbehebung

If you encounter issues with your ECONTROLLY Replacement Remote Control, try the following troubleshooting steps:

• Fernbedienung reagiert nicht:
  • Prüfen Sie, ob die Batterien korrekt mit der richtigen Polarität (+/-) eingelegt sind.
  • Replace old batteries with new AAA ALKALINE batteries.
  • Ensure there are no obstructions between the remote control and the projector's infrared receiver.
  • Confirm the remote is pointed directly at the projector's receiver.
• Koppelungsprobleme:
  • Repeat the pairing process (hold "OK" and "Vol-" for 3-10 seconds).
  • Ensure the projector is powered on and ready for pairing.
  • Move closer to the projector during the pairing process.
  • Consult your specific projector's manual for its unique pairing requirements.
• Eingeschränkte Funktionalität:
  • Some advanced functions or specific buttons might require specific projector firmware or settings. Refer to your projector's manual.
  • Ensure the remote is fully paired and recognized by the projector.

Sollten die Probleme nach Durchführung dieser Schritte weiterhin bestehen, wenden Sie sich bitte an den Kundendienst.

Technische Daten

Bild: Vorderseite view of the remote control displaying its dimensions: 6.7 inches in length and 1.75 inches in width.

Garantie und Support

Garantieinformationen

This ECONTROLLY remote control comes with a 12 Monate Garantie from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or battery leakage.

Kundenservice

For technical assistance, troubleshooting, or warranty claims, please contact your retailer or the manufacturer, Shengxingwang Factory. Please have your product model (B0FPQ2WS3C) and purchase information ready when contacting support.

Manufacturer: Shengxingwang Factory