Einführung
Thank you for choosing the Satco S12535 ST19 LED Light Bulb. This manual provides essential information for the safe and efficient use of your new LED bulb. Please read these instructions carefully before installation and retain them for future reference.
Image: The Satco S12535 ST19 LED Light Bulb, clear glass with visible filaments.
Wichtige Sicherheitsinformationen
- Stromschlaggefahr: Vor dem Einsetzen oder Austauschen der Glühbirne muss immer die Stromzufuhr unterbrochen werden.
- Verwendung im Innen-/Außenbereich: This bulb is rated for wet locations (IP65) and suitable for enclosed fixtures. It can be used indoors or in covered outdoor environments.
- Bandtage: Stellen Sie sicher, dass die Leuchte voltage is 120V. Do not use with incompatible voltage.
- Dimmen: This bulb is dimmable. Use only with compatible 120V dimmers. Incompatible dimmers may cause flickering or damage.
- Temperatur: Do not operate outside the specified temperature range of -20°C to +45°C.
- Handhabung: Allow the bulb to cool before handling. Avoid touching the bulb with bare hands immediately after use.
- Entsorgung: Dispose of LED bulbs according to local regulations.
Setup und Installation
- Ausschalten: Before installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
- Alte Glühbirne entfernen: Die vorhandene Glühbirne vorsichtig aus der Fassung schrauben.
- Neue Glühbirne einsetzen: Screw the Satco S12535 LED bulb into the E26 medium base socket. Ensure it is securely tightened but do not overtighten.
- Einschalten: Stellen Sie die Stromversorgung des Geräts wieder her.
- Dimmer Compatibility (if applicable): If using a dimmer, ensure it is compatible with LED bulbs and rated for 120V.
Image: Close-up of the E26 medium base of the Satco LED bulb, indicating its standard screw-in design.
Betrieb
The Satco S12535 LED bulb is designed for immediate illumination upon power activation. It provides 425 lumens of 5000K natural white light, suitable for various applications.
- Helligkeitsregelung: When connected to a compatible 120V dimmer, the brightness can be adjusted from full intensity to a lower, softer glow.
- Lichtqualität: The bulb features a high Color Rendering Index (CRI) of 92, ensuring accurate and natural color representation of objects in its light.
- Strahlaufweitung: A 300-degree beam spread provides wide and even illumination, minimizing shadows.
Image: The Satco ST19 LED bulb installed in a fixture, providing illumination to a modern living room and kitchen area.
Wartung
The Satco S12535 LED bulb requires minimal maintenance due to its long rated life of 15,000 hours.
- Reinigung: To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Ersatz: Replace the bulb when it reaches the end of its operational life. Follow the installation steps in reverse to remove the old bulb.
Fehlerbehebung
If you encounter issues with your Satco S12535 LED bulb, refer to the following common troubleshooting steps:
- Glühbirne leuchtet nicht:
- Stellen Sie sicher, dass die Stromversorgung der Leuchte eingeschaltet ist.
- Prüfen Sie, ob die Glühbirne fest eingeschraubt ist.
- Testen Sie die Glühbirne in einer anderen funktionierenden Fassung, um sicherzustellen, dass sie nicht defekt ist.
- Verify the fixture itself is operational.
- Flackerndes oder ungleichmäßiges Licht:
- If using a dimmer, ensure it is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
- Check for loose connections in the fixture or bulb socket.
- Stellen Sie sicher, dass die Lautstärketage supply is stable at 120V.
- Bulb is Too Dim or Too Bright:
- If using a dimmer, adjust the dimmer setting.
- Confirm the bulb's specifications (425 lumens, 5000K) match your lighting requirements.
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | Staffel 12535 |
| Wastage | 5 Watt (entspricht 40 W Glühlampe) |
| Helligkeit | 425 Lumen |
| Farbtemperatur | 5000 K (Naturweiß) |
| Glühbirnenform | ST19 |
| Basistyp | E26 Mittlere Basis |
| Farbwiedergabeindex (CRI) | 92 |
| Abstrahlwinkel | 300 Grad |
| Bandtage | 120 V |
| Dimmbar | Yes (with compatible 120V dimmers) |
| Nennlebensdauer | 15,000 Stunden |
| Umweltbewertung | Wet Location Rated (IP65), Enclosed Fixture Rated |
| Betriebstemperatur | -20°C bis +45°C |
| Zertifizierungen | cULus, FCC, RoHS |
| Leistungsfaktor | 0.7 |
| Frequenz | 60 Hz |
| Artikelgewicht (6er-Packung) | 1.06 Pfund |
Image: Lighting Facts label detailing brightness, estimated yearly energy cost, life, light appearance (5000K), and energy used (5 watts).
Garantie und Support
The Satco S12535 ST19 LED Light Bulb is backed by a 2 Jahr Herstellergarantie ab Kaufdatum.
For warranty claims, technical assistance, or product support, please contact Satco customer service directly. Refer to the product packaging or the official Satco webWebsite für aktuelle Kontaktinformationen.
WebWebsite: www.satco.com