Ortis 7-Day Programmable In-Wall Timer Switch

1. Wichtige Sicherheitshinweise

WARNUNG: Risk of electric shock. Improper installation can lead to serious injury or death. Always turn off power at the circuit breaker before installing or servicing this device. Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.

• Dieses Gerät benötigt ein Neutralleiter for operation. Verify the presence of a neutral wire (typically white) in your electrical box before installation.
• Do not exceed the maximum load rating of 1800W or 3/4 HP at 120V.
• Stellen Sie sicher, dass alle Kabelverbindungen sicher und ordnungsgemäß isoliert sind.
• Nur für den Innenbereich.

2. Packungsinhalt

Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:

• Ortis 7-Day Programmable In-Wall Timer Switch (Model KJ-077)
• Drahtmuttern
• Befestigungsschrauben
• Bedienungsanleitung

3. Spezifikationen

4. Installation

Bevor Sie beginnen: Turn off power at the circuit breaker for the switch location. Confirm power is off using a voltage Tester.

Schaltplan

Image: Wiring diagram for the Ortis timer switch. The diagram illustrates connecting the BLACK wire to the LINE, the BLUE wire to the LOAD, and the WHITE wire to the NEUTRAL. Wire nuts are used for secure connections.

Schritt-für-Schritt-Installation:

1. Strom ausschalten: Locate the circuit breaker controlling the switch you are replacing and turn it OFF.
2. Alten Schalter entfernen: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
3. Drähte identifizieren: Identify the Line (incoming power), Load (to light/appliance), and Neutral wires in your electrical box. A neutral wire (usually white) is required for this timer switch. If you do not have a neutral wire, this switch is not compatible.
4. Kabel anschließen: Using the provided wire nuts, connect the wires from the Ortis timer switch to your household wiring as follows:
   • Verbinden Sie SCHWARZ wire from the timer to the LINIE (hot) wire from your electrical box.
   • Verbinden Sie BLAU wire from the timer to the LADEN wire (to the light/appliance).
   • Verbinden Sie WEISS wire from the timer to the NEUTRAL wire from your electrical box.
5. Montageschalter: Carefully fold the wires into the electrical box and secure the timer switch with the provided mounting screws.
6. Wandplatte installieren: Attach your standard wall plate (not included) over the timer switch.
7. Strom wiederherstellen: Schalten Sie den Strom am Sicherungsautomaten wieder ein.

5. Kontrollen überview

Bild: Detailliert view of the Ortis timer switch interface. The blue backlit LCD screen displays time, day, and program status. Buttons for increasing/Dekrementasing values, changing modes, and manual on/off control are clearly indicated. An LED illuminates when the load is active.

The Ortis timer switch features an intuitive three-button interface and a blue backlit LCD screen for easy operation and visibility in low light conditions.

• LCD Bildschirm: Displays current time, day, operating mode, load state, and program information.
• Schlüssel erhöhen: Used to adjust time, program values, or navigate menus upwards.
• Verringertaste: Used to adjust time, program values, or navigate menus downwards.
• Modus-Taste: Cycles through different operating modes and settings menus.
• Ein/Aus-Taste: Manually turns the connected load ON or OFF, or confirms selections.
• LED-Anzeige: Illuminates when the connected load (e.g., light, fan) is ON.

6. Ersteinrichtung

After installation and restoring power, the device will require initial setup.

Aktuelle Uhrzeit und Datum einstellen:

1. Drücken Sie die Modus key until the time setting appears.
2. Verwenden Sie die Zunahme Und Verringern keys to set the current hour, then press Ein / Aus zur Bestätigung.
3. Wiederholen Sie dies für Minuten und Wochentage.

Setting Latitude and Longitude (for Sunrise/Sunset):

This feature allows the timer to automatically adjust ON/OFF times based on local sunrise and sunset.

1. Drücken Sie die Modus key until the latitude/longitude setting appears.
2. Verwenden Sie die Zunahme Und Verringern keys to input your local latitude and longitude values. A chart of major cities may be provided in the full manual for reference, or you can look up your specific coordinates online.
3. Drücken Ein / Aus to confirm. The display will show the calculated sunrise/sunset times for verification.

Sommerzeitumstellung (DST):

The timer can be configured to automatically adjust for Daylight Saving Time. Refer to the full manual for specific steps to enable or disable this feature.

7. Betriebsarten

The Ortis timer switch offers three primary operating modes:

7.1 Automatic Mode (Sunrise/Sunset & Fixed Schedules)

Image: Illustration of the timer switch's automatic control, showing lights turning off at sunrise and on at sunset. The blue backlit LCD screen is visible, indicating clear readability in the dark.

In Automatic Mode, the timer operates based on programmed schedules, including sunrise/sunset times or custom ON/OFF times.

• Sunrise/Sunset Control: Once latitude and longitude are set, the timer automatically calculates and adjusts ON/OFF times daily based on local sunrise and sunset. An offset can be applied to turn lights on/off before or after these times.
• Fixed Schedules: Up to 7 custom ON/OFF programs can be set for specific times and days of the week.

7.2 Zufallsmodus

Image: A visual representation of the timer's random mode, designed to enhance home security by simulating occupancy. Lights turn on and off at varied times, creating a 'lived-in' appearance.

Random Mode varies the ON/OFF times of your lights or appliances slightly to simulate occupancy, enhancing home security when you are away.

• To activate Random Mode, press the Modus key until "Random" is displayed.
• The timer will then randomly adjust your programmed ON/OFF times within a certain window.

7.3 Manueller Modus

Manual Mode allows you to override any programmed schedules and turn the connected load ON or OFF instantly.

• Drücken Sie die Ein / Aus key to toggle the connected load between ON and OFF.
• The timer will remain in the manually set state until the next programmed event or until Manual Mode is exited.

8. Programmierzeitpläne

The Ortis timer switch allows you to set up to 7 distinct ON/OFF programs. Programs can be set for specific days, weekdays, weekends, or all 7 days.

Steps to Program a Schedule:

1. Drücken Sie die Modus key repeatedly until "P01" (Program 1) appears on the screen.
2. Verwenden Sie die Zunahme Und Verringern keys to select the desired ON time (hour and minute), then press Ein / Aus zur Bestätigung.
3. Next, select the days of the week for this ON event. You can choose individual days, groups (e.g., Mon-Fri, Sat-Sun), or all 7 days. Press Ein / Aus zur Bestätigung.
4. Repeat the process to set the corresponding OFF time and days for Program 1.
5. To set additional programs (P02-P07), press the Modus key to advance to the next program number and repeat steps 2-4.
6. Sobald alle Programme eingestellt sind, drücken Sie die Taste Modus key until the current time display returns, indicating the timer is ready to operate.

Notiz: All settings are saved permanently and will resume operation even after a power outage due to the internal battery backup.

9. Breite Kompatibilität

Image: A collage demonstrating the wide range of devices compatible with the Ortis timer switch. Examples include LED, CFL, incandescent, and halogen lights, as well as ceiling fans, fountain pumps, pool pumps, and sprinklers.

The Ortis timer switch is compatible with various lighting types and appliances:

• LED, CFL, Incandescent, Halogen, and Fluorescent Lights
• Deckenventilatoren
• Abluftventilatoren für Badezimmer
• Brunnenpumpen
• Poolpumpen
• Sprinkler

10. Wartung

The Ortis timer switch requires minimal maintenance.

• Reinigung: Wischen Sie die Oberfläche mit einem weichen, damp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
• Keine vom Benutzer zu wartenden Teile: Do not attempt to open or repair the device. Refer to qualified personnel for any issues beyond basic troubleshooting.

11. Fehlerbehebung

12. Garantie und Support

The Ortis 7-Day Programmable In-Wall Timer Switch (Model KJ-077) comes with a 2 Jahr Herstellergarantie.

For technical support, warranty claims, or further assistance, please refer to the contact information provided with your purchase or visit the official Ortis webWebsite.