AirheadStorm GPS Digital Speedometer Instruction Manual

1. Einleitung

This manual provides comprehensive instructions for the AirheadStorm GPS Digital Speedometer. This heads-up display (HUD) is designed to enhance driving safety by presenting essential vehicle information directly in the driver's line of sight. Featuring a 10Hz high refresh rate and Beidou dual-mode chip, it offers broad compatibility with various vehicles, including new energy cars, hybrids, motorcycles, buses, and trucks. Its automatic brightness adjustment ensures optimal visibility in diverse lighting conditions.

2. Packungsinhalt

Bitte überprüfen Sie, ob alle unten aufgeführten Artikel in Ihrem Paket enthalten sind:

• 1 x Heads-Up Display (HUD) GPS Digital Speed Meter
• 1 x Typ-C USB-Kabel
• 1 x Reflexionsfolie
• 1 x Benutzerhandbuch
• 1 x Anti-Slip Double-Sided Tape

Abbildung 2.1: Im Lieferumfang enthaltenes Produktzubehör

3. Produktmerkmale

• Clear Driving Data Display: Provides essential driving information in a clear format.
• Automatische Helligkeitsanpassung: Built-in light sensor automatically adjusts display brightness for optimal visibility in any lighting condition (day or night).
• Vielseitige Kompatibilität: Equipped with a 10Hz high refresh rate and Beidou dual-mode chip, compatible with new energy cars, HYBRIDs, motorcycles, buses, and trucks.
• Multi-Function Speedometer: Allows switching between speed units (KMh and MPH) and includes an overspeed warning feature.
• Feinmechanik: Features seamless assembly technology and a dual-core processor for smooth and consistent RPM displays.
• Mühelose Installation: Designed for user convenience, installs easily without vehicle damage. Powers on and off automatically with your car via USB.
• Visual Overspeed Alerts: Three-level flash alarm visually warns when preset speed thresholds are exceeded. This alarm is silent to minimize distraction.

Figure 3.1: Intelligent Light Sensing for Optimal Visibility

4. Einrichtung

Follow these steps to set up your AirheadStorm GPS Digital Speedometer:

1. Auspacken: Entnehmen Sie vorsichtig alle Komponenten aus der Verpackung.
2. Halterung anbringen: Secure the suction cup mount to the bottom of the HUD unit. Ensure it clicks into place firmly.
3. Positionierung: Wählen Sie einen geeigneten Platz auf Ihrem Armaturenbrett, der Ihre Sicht nicht behindert. view of the road. Use the anti-slip double-sided tape for a secure placement if needed.
4. Stromanschluss: Connect the Type-C USB cable to the HUD unit and plug the other end into a USB power source in your vehicle (e.g., USB port, cigarette lighter adapter). The unit will power on automatically with your vehicle.
5. Reflektierende Folie (optional): If the display is not clear due to reflections, apply the reflective film to your windshield directly above the HUD unit. Clean the windshield thoroughly before application.

Figure 4.1: Speedometer positioned on a dashboard

5. Bedienungsanleitung

The GPS Digital Speedometer is designed for simple operation. Once connected to power, it will automatically turn on and begin acquiring GPS signals to display your speed.

5.1 Ein-/Ausschalten

The device powers on automatically when your vehicle starts and powers off when your vehicle is turned off, provided it is connected to a switched USB power source.

5.2 Helligkeitseinstellung

The built-in light sensor automatically adjusts the display brightness to suit ambient light conditions, ensuring readability during both day and night driving.

5.3 Speed Unit Switching (KMh/MPH)

Refer to the user manual for specific button presses to switch between Kilometers per hour (KMh) and Miles per hour (MPH) display units. This is typically done via a short press of a designated button on the device.

5.4 Überdrehzahlalarm

The device features a three-stage visual overspeed alarm. When your speed exceeds a preset limit, the display will flash to alert you. This alarm is visual only and does not produce sound.

6. Anzeigemodi

The device offers multiple display modes, allowing you to customize the information shown. You can switch between interfaces to meet different needs, typically by pressing a button on the unit.

• Speed + Unit + Compass: Displays current speed, speed unit (MPH/KMh), and cardinal direction.
• Speed + Unit: Displays current speed and speed unit.
• Geschwindigkeit + Kompass: Displays current speed and cardinal direction.
• Nur Geschwindigkeit: Displays only the current speed.

Abbildung 6.1: Mehrere Anzeigemodi

7. Spezifikationen

Abbildung 7.1: Produktabmessungen

8. Fehlerbehebung

• Kein Bildschirm: Ensure the USB cable is securely connected to both the device and a working USB power source. Check if the vehicle's ignition is on.
• Ungenaues Schnelllesen: Stellen Sie sicher, dass das Gerät frei ist view of the sky for optimal GPS signal reception. Speed accuracy may vary slightly based on GPS signal strength.
• Display zu dunkel/hell: The device features automatic brightness adjustment. Ensure the light sensor is not obstructed.
• Kein GPS-Signal: The device requires an unobstructed view of the sky to acquire GPS signals. This may take a few minutes upon initial startup or in areas with poor satellite coverage (e.g., tunnels, dense urban areas).

9. Garantie und Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the manufacturer's official webBewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.