Daakro XY-T1002P 2 Channel Bluetooth Amplifier Board Bedienungsanleitung

Einführung

This manual provides detailed instructions for the installation, operation, and maintenance of the Daakro XY-T1002P 2 Channel Bluetooth Amplifier Board. Please read this manual thoroughly before using the product to ensure proper function and safety.

Image: The Daakro XY-T1002P amplifier board connected to two speakers, demonstrating its 2.0 channel audio output capability.

Sicherheitshinweise

Observe the following safety precautions to prevent electric shock, fire, or damage to the device:

• Stellen Sie sicher, dass die Stromversorgungslautstärketage liegt im angegebenen Bereich von 12–30 V DC.
• Setzen Sie das Gerät keiner Feuchtigkeit oder extremen Temperaturen aus.
• Vermeiden Sie ein Kurzschließen der Ausgangsklemmen.
• Zerlegen oder modifizieren Sie das Gerät nicht amplifier-Board.
• Außerhalb der Reichweite von Kindern aufbewahren.
• Vor dem Anschließen oder Einstellen jeglicher Einstellungen die Stromzufuhr unterbrechen.

Produkt überview

The Daakro XY-T1002P is a 2-channel Bluetooth amplifier board designed for DIY audio projects, offering 100W+100W peak power output. It features a TPA3221 HiFi chip for high-fidelity sound and supports multiple audio input options.

Bild: Eine detaillierte view der amplifier board, showcasing its premium-grade components such as high-capacity capacitors, digital amplifier-specific inductors, solid-state capacitors, Bluetooth chip, TI NE5532 chips, and large heat sinks.

Hauptmerkmale:

• Dual TPA3221 HiFi Chip: Provides ultra-high resolution and low distortion audio.
• 2.0-Kanal-Ausgang: 100W + 100W power output.
• Mehrere Audioeingänge: Bluetooth 5.2, AUX (3.5mm), USB Flash Drive, USB Sound Card.
• Multi-Function Master Volume Knob: Controls volume, play/pause, track skipping, and mode switching.
• Kontrollleuchten: Green for USB, Red for AUX, Blue for Bluetooth mode.
• Höhen- und Bassregelung: Independent knobs for sound customization.

Bild: Ein schräger view der amplifier board, showing the layout of the control knobs and input/output terminals.

Installationsanweisungen

Follow these steps to correctly set up your Daakro XY-T1002P amplifier-Board.

Image: A detailed diagram illustrating the various connection points on the amplifier board, including power input, speaker outputs, 3.5mm audio input, USB input, and the multi-function knob.

1. Stromanschluss:

• Connect a DC power supply (12-30V) to the "POWER DC 12-30V" input terminals. Ensure correct polarity (+ and -).
• Alternatively, use a 5.5-2.5mm DC jack if your power supply has one.
• Wichtig: Ensure the power switch is in the "OFF" position before connecting power.

2. Lautsprecheranschluss:

• Connect your passive speakers to the "SPEAKERS" output terminals.
• Connect the left speaker to the "L+" and "L-" terminals.
• Connect the right speaker to the "R+" and "R-" terminals.
• Ensure proper polarity for optimal sound quality.

3. Audio Input Connection:

Der amplifier supports three main audio input methods:

• Bluetooth: Für drahtlose Verbindungen von Smartphones, Tablets oder Computern.
• AUX: For wired connection via a 3.5mm audio jack from devices like TVs, computers, or MP3 players.
• USB: Zum Abspielen von Audio files directly from a USB flash drive or using the board as a USB sound card for a computer.

Image: An illustration demonstrating the various audio input options available on the amplifier board, including Bluetooth, 3.5mm AUX, and USB, with exampweniger kompatible Geräte.

4. Optional External Bluetooth Antenna:

The board includes a 1st Gen IPEX interface for an optional external Bluetooth antenna (purchased separately) to enhance Bluetooth signal reception.

Bild: Eine Nahaufnahme view of the 1st Gen IPEX interface on the amplifier board, where an optional external Bluetooth antenna can be connected.

Bedienungsanleitung

1. Ein-/Ausschalten:

Locate the power switch on the side of the board. Flip it to the "ON" position to power on the amplifier. Flip it to "OFF" to power off.

Image: A close-up of the power switch, clearly showing the "ON" and "OFF" positions for controlling the ampLeistung des Verstärkers.

2. Mode Selection and Indicator Lights:

Der amplifier board features three indicator lights to show the current input mode:

• Grünes Licht: Indicates USB mode.
• Rotlicht: Indicates AUX mode.
• Blaues Licht: Indicates Bluetooth mode.

To switch modes, quadruple-click the multi-function master volume knob.

Bild: Eine Nahaufnahme view of the three indicator lights (USB, AUX, BT) on the amplifier board, which illuminate to show the active audio input mode.

3. Multi-Function Master Volume Knob:

This knob controls various audio functions:

• Drehen: Passt die Gesamtlautstärke an.
• Ein einziger Klick: Pauses or plays audio.
• Doppelklick: Springt zum nächsten Titel.
• Dreifachklick: Returns to the previous track.
• Vierfachklick: Switches between input modes (USB, AUX, Bluetooth).
• Lange drücken: Schaltet das Gerät EIN/AUS.

Bild: Eine Nahaufnahme view of the three control knobs on the amplifier board, used for master volume, treble adjustment, and bass adjustment.

4. Bluetooth-Kopplung:

1. Stellen Sie sicher, dass amplifier is powered on and in Bluetooth mode (blue indicator light).
2. Aktivieren Sie auf Ihrem Gerät (Smartphone, Tablet) Bluetooth und suchen Sie nach verfügbaren Geräten.
3. Select "XY-T1002P" from the list to pair.
4. Once paired, the blue indicator light may become solid or flash differently depending on the connection status.

5. AUX-Eingang:

Connect your audio source to the 3.5mm AUX input jack. Switch the amplifier to AUX mode (red indicator light) using the multi-function knob.

6. USB Input:

Stecken Sie einen USB-Stick mit Audio ein files into the USB port. Switch the amplifier to USB mode (green indicator light). The ampDer Verstärker erkennt und spielt automatisch kompatible Audiodateien ab. files (WAV, FLAC, APE, MP3). For USB sound card functionality, connect the amplifier to your computer via a USB cable and select it as the audio output device.

7. Treble and Bass Adjustment:

Use the dedicated "TREBLE" and "BASS" knobs to fine-tune the high and low frequencies of your audio output to your preference.

Wartung

• Reinigung: Reinigen Sie die Oberfläche des ampVerstärkerplatine. Keine flüssigen Reiniger oder Lösungsmittel verwenden.
• Lagerung: Bewahren Sie das Gerät bei Nichtgebrauch an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
• Belüftung: Sorgen Sie für ausreichende Belüftung um das amplifier board during operation to prevent overheating.

Fehlerbehebung

Technische Daten

Notiz: Ausreichende Lautstärketage and current input are required for optimal power output. Higher voltage and current generally result in higher power. Under the same conditions, a smaller speaker impedance yields greater power.

Image: A table detailing the power output of the amplifier board at different input voltages und Lautsprecherimpedanzen.

Image: A diagram showing the physical dimensions of the amplifier board, including length, width, and height, along with knob cap length and product weight.

Garantie und Support

For warranty information and technical support, please refer to the seller's policy or contact Daakro customer service through the platform where the product was purchased. Keep your purchase receipt for warranty claims.