VTOMAN X3 Jump Starter with Air Compressor and V-Truck Pro Jump Starter User Manual

1. Einleitung

This manual provides detailed instructions for the safe and effective use of your VTOMAN X3 Jump Starter with Air Compressor and VTOMAN V-Truck Pro Jump Starter. These devices are designed to provide reliable power for jump-starting vehicles and other emergency needs. Please read this manual thoroughly before operation and retain it for future reference.

VTOMAN X3 Starthilfe mit Luftkompressor

The VTOMAN X3 is an all-in-one portable device combining a 3500A peak current jump starter, a 160 PSI air compressor, an LED light, an SOS alarm, and a USB charging port. It is designed for jump-starting vehicles with up to 9L gas or 8.5L diesel engines and for inflating tires with precision.

VTOMAN V-Truck Pro Jump Starter

The VTOMAN V-Truck Pro is a heavy-duty portable jump starter delivering an 8000A peak current. It is compatible with all 12V vehicles, including trucks, RVs, tractors, boats, and other large-displacement diesel engines. It also features a 41600mAh power bank with 65W fast charging capabilities for various electronic devices.

2. Sicherheitshinweise

Always observe the following safety precautions to prevent personal injury or damage to the device and vehicle.

• Vor Gebrauch alle Anweisungen lesen.
• Tragen Sie beim Arbeiten mit Batterien einen Augenschutz und Schutzkleidung.
• Ensure the work area is well-ventilated. Do not smoke or allow sparks or flames near the battery or jump starter.
• Keep the device dry. Do not expose it to rain or wet conditions.
• Außerhalb der Reichweite von Kindern aufbewahren.
• Versuchen Sie nicht, eine eingefrorene Batterie mit Starthilfekabeln zu starten.
• Verbinden Sie nicht die positive und negative Klamps zusammen.
• Trennen Sie den Starthilfe-Booster innerhalb von 30 Sekunden nach dem Starten des Fahrzeugs von der Fahrzeugbatterie.
• Do not over-inflate tires. Always monitor pressure during inflation.
• Das Gerät darf nicht auseinandergebaut werden. Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal durchgeführt werden.

3. Produktüberschreitungview

VTOMAN X3 Components

• Starthilfeanschluss
• Luftschlauchanschluss
• USB-Ausgangsanschluss
• LED-Anzeige
• Control Buttons (+, -, M)
• LED-Taschenlampe

Image: The VTOMAN X3 unit displaying its LED screen with battery level, preset pressure, real-time pressure, tire pressure unit, and inflation mode indicators. Various buttons are visible for control.

VTOMAN V-Truck Pro Components

• Starthilfeanschluss
• DC-Eingangsport
• USB-C-Eingangs-/Ausgangsanschluss
• USB-A Output Ports (A1, A2)
• LED-Batterieanzeigen
• Netzschalter

Image: The VTOMAN V-Truck Pro jump starter connected to a vehicle battery with its heavy-duty clamps. The unit's ports and LED indicators are visible.

4. Einrichtung

Erstladung

Before first use, fully charge your VTOMAN jump starter. It is recommended to fully charge the unit after each use and at least every 3-6 months to maintain battery health.

• VTOMAN V-Truck Pro: Connect the provided 65W charger to the DC input port. A full charge takes approximately 2.5 hours for the 41600mAh battery.
• VTOMAN X3: Connect a compatible USB-C charger to the USB-C input port. The LED screen will indicate charging status.

Image: The VTOMAN V-Truck Pro unit acting as a portable power bank, charging a smartphone, iPad, earphone, smart watch, camera, drone, and game console via its USB ports.

5. Bedienungsanleitung

5.1. Starthilfe für Ihr Fahrzeug

Ensure your jump starter is sufficiently charged before attempting to jump-start a vehicle.

1. Schalten Sie die Zündung des Fahrzeugs und sämtliche Zubehörteile (Lichter, Radio usw.) aus.
2. Verbinden Sie die rote (+) Klamp of the jumper cables to the positive (+) terminal of the vehicle's dead battery.
3. Schließen Sie die schwarze (-) Klamp of the jumper cables to the negative (-) terminal of the vehicle's dead battery, or to a solid, unpainted metal part of the vehicle's chassis away from the battery.
4. Insert the jumper cable plug firmly into the jump starter's jump start port.
5. Start the vehicle's engine. If it does not start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
6. Once the vehicle starts, immediately disconnect the jumper cable plug from the jump starter.
7. Entfernen Sie den schwarzen (-) Steckeramp from the vehicle, then remove the red (+) clamp.

Motorkompatibilität:

• VTOMAN X3: Up to 9L Gas / 8.5L Diesel Engines.
• VTOMAN V-Truck Pro: All Gas / All Diesel Engines (12V vehicles).

Image: The VTOMAN X3 jump starter connected to a car battery, demonstrating the jump-starting process. The unit's display shows operational status.

5.2. Using the Air Compressor (VTOMAN X3 Only)

The VTOMAN X3 features a 160 PSI air compressor with auto-shutoff.

1. Screw the air hose onto the tire valve stem.
2. Connect the other end of the air hose to the air hose port on the VTOMAN X3.
3. Power on the X3 unit. The LED screen will display the current tire pressure.
4. Press the 'M' button to cycle through preset modes (Car, Motorcycle, Bicycle, Ball, Custom) or to select desired pressure units (PSI, KPA, BAR).
5. Verwenden Sie die Tasten „+“ und „-“, um den Zieldruck einzustellen.
6. Press the power button to start inflation. The compressor will automatically stop once the target pressure is reached.
7. Disconnect the air hose from the tire valve and the X3 unit.

Image: The VTOMAN X3 unit connected to a car tire valve, actively inflating the tire. The digital display shows the pressure reading and inflation status.

5.3. Verwendung als tragbare Powerbank

Both VTOMAN jump starters can charge electronic devices.

• Connect your device's USB charging cable to the appropriate USB-A or USB-C output port on the jump starter.
• Das Gerät beginnt mit dem Aufladen.
• VTOMAN V-Truck Pro: Features a 41600mAh capacity and 65W fast charging output, capable of charging a smartphone approximately 8-10 times.

5.4. Using the LED Light / SOS Function (VTOMAN X3 Only)

The VTOMAN X3 includes an integrated LED flashlight with SOS capabilities.

• Press and hold the dedicated light button (if available) or the power button (refer to specific model instructions) to turn on the LED light.
• Press again to cycle through different modes (e.g., steady on, strobe, SOS).
• Zum Ausschalten gedrückt halten.

6. Wartung

Proper maintenance ensures the longevity and optimal performance of your VTOMAN jump starter.

• Reinigung: Wischen Sie das Gerät mit einem trockenen, weichen Tuch ab. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
• Lagerung: Bewahren Sie den Starthilfe-Booster an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
• Aufladen: Recharge the unit fully after each use. If not used frequently, recharge at least every 3-6 months to prevent deep discharge and prolong battery life.
• Kabelinspektion: Regularly inspect jumper cables and air hoses for any signs of damage, wear, or corrosion. Replace if necessary.

7. Fehlerbehebung

If you encounter issues with your VTOMAN jump starter, refer to the following common problems and solutions.

8. Spezifikationen

9. Garantie und Support

For detailed warranty information, please refer to the official VTOMAN website or the warranty card included with your product packaging. For technical support, troubleshooting assistance, or replacement parts, please contact VTOMAN customer service through their official channels.