1. Einleitung
Thank you for choosing the NEXPOW X7 10000A Jump Starter and NP19PLUS Portable Tire Inflator. This device is designed to provide reliable emergency vehicle starting power and convenient tire inflation. Please read this manual thoroughly before use to ensure safe and optimal operation.
2. Sicherheitshinweise
WARNUNG: Lesen Sie alle Sicherheitswarnungen und Anweisungen. Die Nichtbeachtung der Warnungen und Anweisungen kann zu elektrischem Schlag, Brand und/oder schweren Verletzungen führen.
- Tragen Sie beim Arbeiten mit Batterien immer einen Augenschutz.
- Do not allow the jump starter clamps to touch each other or connect to the same piece of metal, as this may cause sparks, short circuits, or damage.
- Starten Sie eine gefrorene Batterie nicht mit Starthilfe.
- Do not attempt to jump start a vehicle if the battery is severely damaged or leaking.
- Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf.
- Ensure proper ventilation when operating the tire inflator to prevent overheating.
- Do not over-inflate tires. Always refer to the vehicle manufacturer's recommended tire pressure.
- The device operates reliably in temperatures from -4°F to 140°F (-20°C to 60°C).
- The jump starter features 10 smart safety protections: reverse polarity, reverse charge, short-circuit, overcurrent, overload, over-temperature, under-temperature, overcharge, over-discharge, and low-voltage.
Image: NEXPOW X7 Jump Starter displaying its 10 smart safety protections, including over-charge, over-current, short-circuit, over-voltage, umgekehrte Verbindung, niedrige Lautstärketage, extreme temperature, over-load, spark-proof, and over-heat protection.
3. Lieferumfang
Packen Sie den Inhalt vorsichtig aus und vergewissern Sie sich, dass alle Artikel vorhanden sind:
- NEXPOW X7 Jump Starter Host
- EVA-Aufbewahrungstasche
- Benutzerhandbuch (dieses Dokument)
- C to C Supercharge Cable
- USB to C Supercharge Cable
- Zigarettenanzünder-Adapter
- 65-W-Wandladegerät
- Batterie Clamp & Jumper Cable
Image: All components included in the NEXPOW X7 and NP19PLUS package, laid out next to the main unit and its EVA storage bag.
4. Produktüberschreitungview
4.1. Main Unit Display and Ports
The NEXPOW X7 features a large, easy-to-read display that shows input/output status, LED light mode, battery percentage, electric power, fast charge input/output, and battery discharge status.
Bild: Nahaufnahme view of the NEXPOW X7 Jump Starter's large display, showing various indicators like battery percentage, input/output power, and charging status. The image also details the steps for jump starting a car and important cautions.
4.2. Heavy-Duty Clamps
The included heavy-duty jumper clamps are designed for reliable contact and safety. They feature high-conductivity copper wires, thick grippy teeth, and a secure, large design. An intuitive indicator on the clamps shows green for correct connection and beeps if connected incorrectly.
Bild: Detailliert view of the NEXPOW heavy-duty jumper clamps, highlighting features such as thick, conductive cables, thick teeth for strong grip, and a strong spring mechanism for secure connection.
5. Aufladen des Geräts
Before first use, fully charge the NEXPOW X7. It is recommended to keep the device charged above 50% for optimal performance and longevity.
- Connect the provided C to C Supercharge Cable or USB to C Supercharge Cable to the input port of the NEXPOW X7.
- Connect the other end of the cable to the 65W Wall Charger or a compatible USB power source.
- The display will indicate the charging status and battery percentage.
6. Operating the Jump Starter (X7)
6.1. Steps to Jump Start Your Car
- Verbinden Clamps: Verbinden Sie die rote (+) Klamp an den Pluspol der Autobatterie und den schwarzen (-) Steckeramp to the negative terminal. The smart indicator on the clamps will show green for correct connection.
- Power-Taste drücken: Ensure the jump starter is powered on.
- Startfahrzeug: Start your car's engine. If it doesn't start immediately, wait a few seconds and try again.
- Cl entfernenamps: Sobald der Motor startet, sofort den Zündschlüssel entfernen.amps from the car battery. First remove the black (-) clampdann die rote (+) clamp.
Vorsicht:
- Do not start any engine that exceeds the maximum displacement the jump starter can bear.
- Lassen Sie die Starthilfe zwischen jedem Startversuch mindestens 1 Minute abkühlen.
Image: The NEXPOW X7 Jump Starter connected to a car battery, demonstrating its capability to start 12V vehicles with all gas and diesel engine sizes, providing up to 60 starts per charge. It is suitable for trucks, RVs, pickups, SUVs, and cars.
6.2. Funktion „Start erzwingen“
The X7 features a built-in Force Start technology that activates automatically when needed, allowing you to start completely dead batteries, including zero-voltage batteries, without requiring a power button press.
6.3. All-Weather Operation
The NEXPOW X7 is designed to work reliably in extreme temperatures, from -4°F to 140°F (-20°C to 60°C), ensuring dependable starts in various weather conditions.
Image: The NEXPOW X7 Jump Starter depicted in various weather conditions (rain, snow, and heat), illustrating its all-weather capability for effortless starts from -4°F to 140°F.
7. Operating the Tire Inflator (NP19PLUS)
7.1. Inflationsprozess
- Verbinden Sie den Luftschlauch mit dem Reifenventilschaft.
- Connect the 3m (9.8ft) power cord to a 12V power source (e.g., car cigarette lighter).
- Set the desired pressure using the controls on the inflator.
- Start the inflation. The inflator will automatically stop once the preset pressure is reached.
The NP19PLUS can inflate standard car tires (195/55 R15) from 30 PSI to 36 PSI in less than 1.5 minutes, and Tesla tires (235/45 R18) from 30 PSI to 36 PSI in less than 2 minutes, reaching a maximum pressure of 150PSI.
7.2. Cooling Period
After running continuously for a period of time, allow the portable air compressor to cool for 10 minutes to prevent overheating and ensure longevity.
8. Zusätzliche Funktionen
8.1. LED-Taschenlampe
The NEXPOW X7 features a 600LM ultra-bright LED flashlight with multiple modes for various situations:
- Stetig: For general illumination during roadside emergencies, power outages, or outdoor activities.
- Strobe: Zur Signalgebung oder um Aufmerksamkeit zu erregen.
- SOSSE: Zur Notsignalisierung.
Image: The NEXPOW X7 Jump Starter demonstrating its 600LM ultra-bright LED flashlight with Steady, Strobe, and SOS modes, suitable for outdoor camping, roadside emergencies, power outages, and night travel.
8.2. Powerbank-Funktion
Equipped with 65W PD fast charging, the NEXPOW X7 can also serve as a portable power bank to charge various electronic devices, including smartphones, tablets, cameras, drones, and laptops.
Image: The NEXPOW X7 Jump Starter illustrating its high-capacity battery and 65W PD fast charging capability, showing it can charge multiple devices like iPads, iPhones, AirPods, smartwatches, GoPros, cameras, drones, and MacBooks.
9. Wartung
- Lagerung: Bewahren Sie das Gerät an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
- Laden: It is suggested to recharge the battery pack at least once every 3 months to maintain battery health, even if not in use. Ensure the device is at least 50% power before storage.
- Reinigung: Reinigen Sie die Außenseite des Geräts mit einem weichen, trockenen Tuch. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
- Kabelpflege: Kabel und Anschlüsse prüfenampVor jedem Gebrauch auf Beschädigungen prüfen. Gegebenenfalls ersetzen.
10. Fehlerbehebung
Sollten Sie auf Probleme stoßen, konsultieren Sie bitte die folgenden häufigen Probleme und Lösungen:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Starthilfegerät lässt sich nicht einschalten. | Der Akku ist vollständig entladen. | Laden Sie das Gerät vor Gebrauch vollständig auf. |
| Das Fahrzeug startet nach dem Anschließen nicht. | Falsche Klamp connection; vehicle battery too dead; jump starter needs cooling. | Überprüfen Sie dieamp connections (green indicator); use Force Start if battery is zero-voltage; allow 1 minute cool-down between attempts. |
| Tire inflator is slow or not inflating. | Low power supply; air hose leak; tire valve issue. | Ensure stable 12V power; check hose connections; inspect tire valve. Allow cool-down if used continuously. |
| Auf der Anzeige erscheint ein Fehlercode. | Interner Fehler oder spezifischer Zustand. | Den genauen Fehlercode finden Sie im vollständigen Handbuch (sofern verfügbar) oder wenden Sie sich an den Kundendienst. |
11. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Modell | X7, NP19PLUS |
| Batteriekapazität | 88.8 Wh |
| Anfangslautstärketage | 12 V |
| Spitzenstrom | 10000 A |
| Input (PD) | 5 V = 3 A, 9 V = 3 A, 12 V = 3 A, 15 V = 3 A, 20 V = 3.25 A (max. 65 W) |
| USB-Ausgang | 5V=3A, 9V=2A, 12V=1.5A |
| Typ-C-Ausgang | 5 V = 3 A, 9 V = 3 A, 12 V = 3 A, 15 V = 3 A, 20 V = 3.25 A (max. 65 W) |
| Betriebstemperatur | -4°F bis 140°F (-20°C bis 60°C) |
| Tire Inflator Max Pressure | 150 PSI |
12. Garantie und Support
NEXPOW products are designed and manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official NEXPOW webBitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.