BSIDE OT5 Mini Digital Oscilloscope User Manual

Einführung

The BSIDE OT5 Mini Digital Oscilloscope is a compact and portable instrument designed for basic electrical measurements and waveform analysis. Featuring a 50 MHz bandwidth and a 200 MSa/s real-time sampling rate, it provides clear and detailed waveform displays on its 3.2-inch color LCD. Its intuitive interface and robust design make it suitable for various applications, including electronics, audio, and automotive diagnostics.

Lieferumfang

Packen Sie den Inhalt vorsichtig aus und vergewissern Sie sich, dass alle Artikel vorhanden sind:

• 1 x BSIDE OT5 Mini Oscilloscope
• 1 x BNC Oscilloscope Probe
• 1 x USB-C-Ladekabel
• 4 x Color Rings (for probe identification)
• 1 x Tragetasche
• 1 x Alignment Screwdriver
• 1 x Benutzerhandbuch (Englisch)

Image: All components included in the BSIDE OT5 Mini Oscilloscope package.

Produkt überview

The OT5 Mini Oscilloscope features an ultra-slim and compact design, making it highly portable for on-the-go measurements. Its dimensions are approximately 130.1 x 64.1 x 23 mm, and it weighs only 143g.

Image: The compact BSIDE OT5 Mini Oscilloscope, easily held in one hand.

Anzeige

The device is equipped with a 3.2-inch full-viewing angle TFT color LCD, providing bright and clear waveform readings from various perspectives. This display ensures that all measurement data and waveforms are easily visible.

Image: The 3.2-inch full-viewing LCD of the oscilloscope displaying a waveform.

Bedienelemente

The oscilloscope features an intuitive interface with four main buttons for essential functions and a side rotary wheel for quick adjustments, enhancing operational speed and ease of use.

Aufstellen

Aufladen des Geräts

Before first use, fully charge the oscilloscope using the provided USB C charging cable. Connect the cable to the device's USB C port and a standard USB power adapter (not included). The built-in 1200 mAh rechargeable lithium-ion battery provides over 8 hours of continuous operation when fully charged.

Bild: Intern view mit besonderem Fokus auf den wiederaufladbaren 1200-mAh-Akku.

Anschließen der Sonde

Connect the BNC oscilloscope probe to the BNC connector on the device. Ensure a secure connection. The probe can be set to X1 or X10 attenuation. Adjust the oscilloscope's settings to match the probe's attenuation for accurate measurements.

Bedienungsanleitung

Ein-/Ausschalten

Press and hold the power button to turn the oscilloscope on or off.

Grundlegende Messung

The device supports both automatic and manual waveform capture. For quick analysis, use the auto-ranging function. The oscilloscope can capture various waveform types, including sinusoidal, square, triangular, sawtooth, and more.

Image: The oscilloscope displaying a captured waveform with key measurement data.

Auslösemodi

Select from Automatic, Single, or Normal trigger modes to stabilize repetitive waveforms or capture single-shot events. The trigger can be set to rising or falling edge.

Time Base and Vertical Sensitivity

Adjust the horizontal time base (10 ns/div to 20 s/div) and vertical sensitivity (20 mV/div to 10 V/div) to properly scale the waveform on the screen. The device supports automatic time base and amplitude calibration.

Cursor Measurements

Utilize vertical and horizontal cursors to perform precise measurements on specific segments of the waveform, such as voltage differences or time intervals.

Mathematical Operations (FFT)

The oscilloscope supports mathematical operations, including Fast Fourier Transform (FFT), for frequency domain analysis.

Daten speichern und übertragen

Waveforms can be saved with a single click and viewed directly on the unit or transferred to a PC for further analysis. The device supports data retention and transfer.

Bild: Examples of various waveforms measured and displayed by the oscilloscope.

Wartung

Batteriepflege

To prolong battery life, avoid fully discharging the device frequently. Recharge the battery when the low battery indicator appears. Store the device in a cool, dry place if not used for extended periods.

Reinigung

Reinigen Sie das Gerät mit einem weichen, trockenen Tuch. Verwenden Sie keine Scheuermittel oder Lösungsmittel, da diese das Gerät beschädigen können.asing oder Bildschirm.

Firmware-Aktualisierungen

Firmware updates may be released periodically to improve performance or add new features. Please contact BSIDE support for information on available firmware updates and instructions on how to apply them.

Fehlerbehebung

If you encounter issues with your BSIDE OT5 Mini Oscilloscope, consider the following:

• Gerät lässt sich nicht einschalten: Ensure the battery is sufficiently charged. Connect the USB C charging cable and allow it to charge for a period before attempting to power on again.
• Es wird keine Wellenform angezeigt: Check that the probe is correctly connected to both the device and the circuit under test. Verify the probe's attenuation setting matches the oscilloscope's input settings. Adjust the time base and vertical sensitivity to bring the waveform into view.
• Instabile Wellenform: Adjust the trigger level and trigger mode (Automatic, Single, Normal) to stabilize the waveform. Ensure the trigger edge (rising/falling) is correctly selected.
• Ungenaue Messungen: Perform an auto-calibration of the time base and amplitude. Ensure the probe is properly calibrated and connected.

The device features intelligent anti-burn and overload protection to prevent damage from incorrect input. If issues persist, contact customer support.

Technische Daten

Garantie und Support

For warranty information, technical support, or inquiries regarding firmware updates, please contact BSIDE customer service. Refer to the contact details provided with your purchase or visit the official BSIDE webWebsite für Unterstützung.