SwitchBot Matte Relay Switch 1PM User Manual

1. Produktüberschreitungview

The SwitchBot Matte Relay Switch 1PM is a compact, power-measuring relay switch module designed to integrate existing appliances and lighting into your smart home system. It features Wi-Fi and Bluetooth connectivity, an integrated Bluetooth repeater, and compatibility with major smart home platforms like Alexa, Apple Home, and Google Home. This device allows for remote control, scheduling, and energy monitoring of connected devices.

Image: SwitchBot Relay Switch 1PM highlighting its control capabilities, Bluetooth, Wi-Fi, and Matter compatibility.

2. Lieferumfang

• Relais-Schalter 1PM (x1)
• Benutzerhandbuch (x1)

3. Safety Information and Installation Guidelines

Ihre Sicherheit ist von größter Bedeutung. When installing this device, always adhere to your country's standards for electrical installation. Before commencing any mounting or installation, ensure that the circuit breakers are turned off and verify there is no voltage on the terminals. Once you confirm the absence of voltage, you may proceed with wiring. Consult the user guide thoroughly before beginning installation.

This video is for demonstration purposes only. It is highly recommended to hire a professional electrical installer for device installation. Wire colors may vary based on regional standards. Always follow local regulations and standards.

3.1. Verdrahtungsanweisungen

1. Strom ausschalten: Locate the circuit breaker for the area where you will install the relay switch and switch off the power. Verify with a voltagPrüfen Sie, ob der Strom abgeschaltet ist.
2. Neutralleiter anschließen: Connect the neutral wire (typically blue) to the 'N' terminal on the Relay Switch 1PM.
3. Stromführendes Kabel anschließen: Connect the live wire (typically brown or red) to the 'L' terminal on the Relay Switch 1PM.
4. Lastdraht anschließen: Connect the load wire (the wire going to your light fixture or appliance) to the 'O' terminal on the Relay Switch 1PM.
5. Schließen Sie die Schalterdrähte an: Connect the existing wall switch wires to the 'SW' and 'L' terminals on the Relay Switch 1PM. This allows the physical switch to control the relay.
6. Reinstall Switch Shell: Carefully place the Relay Switch 1PM into the wall box and reinstall the switch shell.
7. Strom wiederherstellen: Schalten Sie den Schutzschalter wieder ein.

Image: Wiring diagram for the SwitchBot Relay Switch 1PM.

Bild: Example of the Relay Switch 1PM installed behind an existing wall switch.

4. Bedienungsanleitung

4.1. Initial Setup and App Control

1. Laden Sie die SwitchBot-App herunter: Suchen nach "SwitchBot" in your smartphone's app store and download the application.
2. Gerät hinzufügen: Open the app, create an account or log in, and follow the on-screen instructions to add the Relay Switch 1PM. Ensure your phone's Bluetooth is enabled during this process.
3. Mit WLAN verbinden: During setup, connect the device to your 2.4 GHz Wi-Fi network for remote control and smart home integration.
4. Steuerung per App: Once connected, you can use the SwitchBot app to turn the connected appliance or light on/off, set schedules, and monitor energy usage.

Image: SwitchBot app displaying real-time energy monitoring data.

4.2. Smart Home Integration (Matter Certified)

The Relay Switch 1PM is Matter certified, allowing for broad compatibility with various smart home platforms including Apple Home, Alexa, Google Home, and SmartThings. A compatible smart speaker or hub may be required for full functionality with certain platforms.

• Apple Home: Requires connection to the Matter network.
• Alexa/Google Home/SmartThings: Requires a compatible speaker or hub for direct control.

Image: Matter certification and smart home platform compatibility.

4.3. Bluetooth Repeater Function

The Relay Switch 1PM includes an integrated Bluetooth repeater, which supports networking with up to 10 SwitchBot Bluetooth sub-devices. This extends the range and reliability of your SwitchBot ecosystem, allowing you to remotely view and operate these devices and integrate them into automations.

Image: The Relay Switch 1PM functioning as a Bluetooth repeater for other SwitchBot devices.

4.4. Energieüberwachung

The device provides real-time power consumption data and historical charts through the SwitchBot app. This feature helps analyze power usage for the connected channel, contributing to energy management and potential electricity bill savings. One year of free cloud data storage is included.

Image: Energy monitoring data displayed on the SwitchBot app and a laptop.

5. Wartung

• Reinigung: Reinigen Sie das Gerät mit einem trockenen, weichen Tuch. Verwenden Sie keine flüssigen Reiniger oder Sprays.
• Firmware-Updates: Regularly check the SwitchBot app for available firmware updates to ensure optimal performance and security.
• Umgebungsbedingungen: Ensure the device is installed in a dry environment, away from direct sunlight and extreme temperatures, to prolong its lifespan.

6. Fehlerbehebung

• Gerät reagiert nicht: Check if the power is on at the circuit breaker. Ensure the device is properly wired. Verify Wi-Fi connectivity in the SwitchBot app.
• Verbindungsprobleme: Ensure your Wi-Fi router is operating on a 2.4 GHz band. Move the device closer to the router if possible. Restart the device and your router.
• App Control Delays: Check your internet connection speed. Ensure the SwitchBot app is updated to the latest version.
• Physikalischer Schalter funktioniert nicht: Verify the wiring to the 'SW' and 'L' terminals. Ensure the physical switch itself is functional.
• Matter Integration Problems: Ensure your Matter controller (e.g., Apple HomePod, Google Nest Hub) is updated and properly configured. Firmware updates for the Relay Switch 1PM are crucial for Matter compatibility.

7. Spezifikationen

Image: Dimensions of the compact Relay Switch 1PM.

8. Garantie und Support

Informationen zur Garantie und zum technischen Support finden Sie auf der offiziellen SwitchBot-Website. website or contact SwitchBot customer service directly. Keep your purchase receipt for warranty claims.