FERM WTA1003 Digital Water Timer Instruction Manual

1. Einleitung

Thank you for choosing the FERM WTA1003 Digital Water Timer. This device is designed to automate your garden watering tasks, ensuring your plants receive consistent hydration. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

2. Sicherheitshinweise

• This device is intended for outdoor use with cold water only. Do not use with hot water or other liquids.
• Protect the device from freezing temperatures. Remove the timer from the faucet and store it indoors during winter to prevent damage.
• Do not immerse the timer in water. While it is IPX5 rated for water resistance, it is not designed for submersion.
• Achten Sie darauf, dass die Batterien gemäß der Polaritätsmarkierung richtig eingelegt sind. Entfernen Sie die Batterien, wenn das Gerät längere Zeit nicht benutzt wird.
• Außerhalb der Reichweite von Kindern aufbewahren.

3. Packungsinhalt

Bitte prüfen Sie das Paket auf folgende Artikel:

• FERM WTA1003 Digital Water Timer
• G3/4" (26.5 mm) faucet adapter
• G1/2" (21 mm) faucet adapter
• Metallischer Filter
• Quick-connect hose fitting
• Bedienungsanleitung

Note: 2x AA batteries are not included and must be purchased separately.

4. Einrichtung

4.1 Einlegen der Batterie

1. Suchen Sie das Batteriefach auf der Rückseite des Timers.
2. Schieben Sie die Batterieabdeckung auf.
3. Legen Sie zwei (2) AA-Alkalibatterien ein und achten Sie dabei auf die richtige Polarität (+/-).
4. Schließen Sie die Batterieabdeckung fest.

4.2 Anschluss an den Wasserhahn

The timer is compatible with most outdoor threaded faucets. It includes adapters for G3/4" (26.5 mm) and G1/2" (21 mm) threads.

1. Ensure the metallic filter is placed inside the timer's inlet connection. This prevents debris from entering the timer.
2. Screw the appropriate faucet adapter (G3/4" or G1/2") onto your outdoor faucet.
3. Attach the water timer to the faucet adapter by screwing it on firmly by hand. Do not overtighten.

Bild 1: Assembly diagram of the water timer, showing the metallic filter, faucet connection, and hose quick-connect.

4.3 Connecting to Hose

1. Attach your garden hose to the quick-connect fitting at the bottom of the water timer.
2. Stellen Sie sicher, dass die Verbindung sicher ist, um Lecks zu vermeiden.

Bild 2: The FERM WTA1003 water timer installed on a brick wall faucet, actively watering a garden area.

5. Bedienungsanleitung

The FERM WTA1003 features a large, readable LCD screen for easy programming.

5.1 Programmierung von Bewässerungsplänen

The timer allows for up to three watering programs per day or a weekly cycle. Watering duration can be set from 1 second to 99 minutes, and intervals from 1 hour to 15 days.

1. Aktuelle Uhrzeit einstellen: Use the 'TIME' button to set the current time and day.
2. Programm 1 (P1): Press 'PROG' to enter program mode. Select P1. Set the start time, watering duration, and frequency (e.g., daily, specific days of the week, or interval).
3. Program 2 (P2) & Program 3 (P3): Repeat the steps for P1 to set up additional watering schedules if needed.
4. Review Programme: Use the 'PROG' button to cycle through and review your set programs.
5. Aktivieren: Ensure the timer is in 'AUTO' mode for the programs to run automatically.

5.2 Manual Watering (OPEN Function)

The 'OPEN' function allows you to manually turn on the water without affecting your programmed schedules. This is useful for temporary watering or using the faucet for other purposes.

• Press the 'OPEN' button to start manual watering.
• Press 'OPEN' again to stop manual watering.

5.3 OFF Function

To temporarily disable all watering programs and manual operation, use the 'OFF' function.

• Press the 'OFF' button to stop all watering. The display will show 'OFF'.
• Press 'OFF' again to return to 'AUTO' mode and resume programmed watering.

Bild 3: Funktion vorbeiview with icons, highlighting watering intervals, multiple schedules, faucet compatibility, pressure range, and frost warning.

6. Wartung

6.1 Reinigen des Filters

Periodically check and clean the metallic filter located at the inlet of the timer to prevent blockages and ensure optimal water flow.

• Schrauben Sie den Timer vom Wasserhahn ab.
• Den Metallfilter entfernen.
• Spülen Sie den Filter unter fließendem Wasser ab, um eventuell angesammelte Ablagerungen zu entfernen.
• Setzen Sie den sauberen Filter wieder ein und befestigen Sie den Timer wieder am Wasserhahn.

6.2 Winterization / Frost Protection

WARNING: Protect the timer from frost.

• Before the first frost, disconnect the water timer from the faucet and hose.
• Nehmen Sie die Batterien heraus.
• Store the timer in a dry, frost-free location indoors.

7. Fehlerbehebung

• Kein Wasserfluss: Check if the faucet is fully open. Ensure the metallic filter is not clogged. Verify battery charge.
• Timer schaltet sich nicht ein: Überprüfen Sie den Batterieeinbau und stellen Sie sicher, dass die Batterien neu sind.
• Leaks from connections: Ensure all connections are tightened securely. Check rubber washers for proper seating and damage.
• Programs not running: Ensure the timer is in 'AUTO' mode. Verify that the current time and program start times are set correctly.
• Bildschirm ist leer oder dunkel: Batterien ersetzen.

8. Spezifikationen

• Modell: WTA1003
• Marke: FERM
• Wasserdruckbereich: 0.5 - 8 bar
• Wasserdurchflussrate: 15.8 - 21 liters per minute (depending on pressure)
• Bewässerungsdauer: 1 Sekunde bis 99 Minuten
• Watering Interval: 1 Stunde bis 15 Tage
• Programme: Up to 3 per day or weekly cycles
• Kompatibilität der Wasserhähne: G3/4" (26.5 mm) and G1/2" (21 mm)
• Wasserbeständigkeit: IPX5
• Energiequelle: 2x AA Batterien (nicht enthalten)
• Material: ABS-Kunststoff
• Herkunft: China

9. Garantie und Support

FERM products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.