Langsdom AirSwim Neo Bone Conduction Headphones User Manual

1. Einleitung

The Langsdom AirSwim Neo bone conduction headphones are engineered for versatile use, offering high-performance audio in diverse environments. Featuring IP68 waterproofing, a comfortable skin-friendly silicone design, and dual Bluetooth V6.0 and MP3 modes, these headphones are suitable for activities such as swimming, running, and general daily use. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Lieferumfang

• Langsdom AirSwim Neo Bone Conduction Headphones
• Magnetisches Lade-/Datenkabel
• Benutzerhandbuch (dieses Dokument)

3. Produktüberschreitungview

Familiarize yourself with the key features and design elements of your AirSwim Neo headphones.

Abbildung 3.1: Headphones in use by a swimmer, demonstrating the built-in 32GB memory for MP3 playback, essential for underwater listening.

Abbildung 3.2: Ergonomic design for comfortable and secure fit during extended wear, featuring skin-friendly silicone and a bio-curved shape.

Abbildung 3.3: The headphones are designed for both water and land activities, offering IP68 waterproof protection for swimming and durability for various sports.

Abbildung 3.4: Intern view illustrating the advanced Bluetooth 6.0 technology for strong signal, fast connection, and low power consumption.

Abbildung 3.5: Battery performance details, indicating up to 8 hours of playtime in Bluetooth mode and 4 hours in MP3 mode.

Abbildung 3.6: The AI single mic ENC algorithm ensures clear call quality by reducing environmental noise.

4. Einrichtung

4.1 Erstaufladung

Before first use, fully charge the headphones. Connect the magnetic charging cable to the charging port on the headphones and the other end to a USB power source (e.g., computer USB port or USB wall adapter). A full charge takes approximately 1.5 hours. The indicator light will change to show charging status (e.g., red for charging, blue for fully charged).

4.2 Ein-/Ausschalten

• Einschalten: Press and hold the Power/Multi-function button for 3 seconds until the indicator light flashes and you hear a power-on prompt.
• Ausschalten: Press and hold the Power/Multi-function button for 5 seconds until the indicator light turns off and you hear a power-off prompt.

4.3 Bluetooth-Kopplung

1. Stellen Sie sicher, dass die Kopfhörer ausgeschaltet sind.
2. Press and hold the Power/Multi-function button for 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
3. Aktivieren Sie auf Ihrem Gerät (Smartphone, Tablet, Computer) Bluetooth und suchen Sie nach verfügbaren Geräten.
4. Select "AirSwim Neo" from the list of found devices.
5. Once paired, the indicator light will flash blue slowly, and you will hear a connection confirmation.

Die Kopfhörer versuchen beim Einschalten automatisch, sich wieder mit dem zuletzt gekoppelten Gerät zu verbinden.

4.4 MP3 Mode (Music Transfer)

The AirSwim Neo features a built-in 32GB memory for offline music playback, ideal for swimming or when a Bluetooth connection is not desired.

1. Connect the magnetic charging/data cable to the headphones.
2. Connect the USB end of the cable to your computer. The headphones will be recognized as a removable disk.
3. Ziehen Sie Ihre gewünschte Musik per Drag & Drop in die App. files (MP3, WMA, WAV, APE, FLAC formats are supported) into the headphone's storage folder.
4. Entfernen Sie die Wechseldiskette sicher aus dem Computer, bevor Sie das Kabel abziehen.

Alternatively, an OTG adapter can be used to connect the headphones to compatible mobile devices for music transfer.

5. Bedienungsanleitung

5.1 Umschalten zwischen Bluetooth- und MP3-Modus

Press the Mode button (often combined with the Power/Multi-function button or a dedicated button) to switch between Bluetooth and MP3 playback modes. A voice prompt will confirm the current mode.

5.2 Musikwiedergabesteuerung

• Abspielen/Pause: Drücken Sie kurz die Multifunktionstaste.
• Lautstärke erhöhen: Drücken Sie kurz die Lautstärketaste +.
• Lautstärke runter: Drücken Sie kurz die Lautstärketaste -.
• Nächster Titel: Die Lautstärketaste + lange drücken.
• Vorheriges Lied: Die Lautstärketaste - lange drücken.

5.3 Anrufmanagement

• Anruf annehmen/beenden: Short press the Multi-function button during an incoming call or to end an active call.
• Anruf ablehnen: Während eines eingehenden Anrufs die Multifunktionstaste lange gedrückt halten.
• Wahlwiederholung letzte Nummer: Drücken Sie die Multifunktionstaste zweimal, wenn Sie nicht telefonieren.

5.4 Sprachassistent

Triple-press the Multi-function button to activate your device's voice assistant (e.g., Siri, Google Assistant).

5.5 Waterproof Usage (Swimming)

For swimming and other water-based activities, it is recommended to use the MP3 mode. Bluetooth signals do not transmit effectively through water. Ensure the charging port is clean and dry before and after water exposure. The IP68 rating allows submersion up to 2 meters.

6. Wartung

6.1 Reinigung

• Wischen Sie den Kopfhörer mit einem weichen,amp Reinigen Sie das Tuch nach jedem Gebrauch, insbesondere nach dem Training oder Schwimmen.
• Do not use abrasive cleaners, alcohol, or chemical solvents, as these can damage the silicone material and waterproof seals.
• Ensure the charging port is free of debris and dry before charging.

6.2 Speicherung

Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the headphones to prevent damage to the frame.

6.3 Wasserfeste Pflege

After using the headphones in chlorinated or saltwater, rinse them thoroughly with fresh water and allow them to air dry completely before charging or storing. This helps prevent corrosion and maintains the integrity of the waterproof seals.

7. Fehlerbehebung

• Kein Strom: Ensure the headphones are fully charged. If the issue persists, try a different charging cable or USB port.
• Kein Ton: Check the volume level on both the headphones and your connected device. Ensure the headphones are correctly paired in Bluetooth mode or that music files are properly loaded in MP3 mode.
• Bluetooth-Kopplung fehlgeschlagen: Ensure the headphones are in pairing mode (red and blue flashing light). Turn off and on your device's Bluetooth, then try pairing again. Clear previous pairings on your device if necessary.
• Probleme bei der Musikübertragung: Verify the magnetic charging/data cable is securely connected. Ensure music files are in supported formats (MP3, WMA, WAV, APE, FLAC). Try connecting to a different USB port on your computer.
• Schlechte Anrufqualität: Ensure the microphone is not obstructed. Check for strong Bluetooth connection. The AI Call Noise Reduction feature works best in moderately noisy environments.

Sollten die Probleme weiterhin bestehen, finden Sie weitere Hilfe im Supportbereich.

8. Spezifikationen

9. Garantieinformationen

The Langsdom AirSwim Neo headphones come with a 1 Jahr eingeschränkte Garantie Diese Garantie gilt ab Kaufdatum und deckt Herstellungs- und Verarbeitungsfehler bei normalem Gebrauch ab. Sie deckt keine Schäden ab, die durch Missbrauch, Unfälle, nicht autorisierte Änderungen oder normale Abnutzung verursacht wurden. Bitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

10. Unterstützung

For further assistance, technical support, or warranty inquiries, please contact Langsdom customer service through the retailer where you purchased the product or visit the official Langsdom webWebsite für Kontaktinformationen.

Online-Ressourcen:

• Langsdom Official WebWebsite: Visit the Langsdom Store on Amazon