Einführung
The Yeedi S20 Infinity Ultra is an advanced robot vacuum and mop designed to provide comprehensive floor cleaning. It features FocusJet Stain Pre-Dissolving Technology, a Mop Roller Smart Cover, powerful 22000Pa suction, 145°F hot air drying, hot water mop washing, and AI obstacle avoidance. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device to ensure optimal performance.
Image: The Yeedi S20 Infinity Ultra Robot Vacuum and Mop with its Omni Station.
Aufstellen
Follow these steps to set up your Yeedi S20 Infinity Ultra for the first time:
- Packen Sie das Gerät aus: Carefully remove all components from the packaging. Ensure all protective films and packing materials are removed from the robot and the Omni Station.
- Position the Omni Station: Place the Omni Station on a hard, level surface against a wall, ensuring there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front. Plug the power cord into the station and a wall outlet.
- Install Side Brush and Main Brush: Attach the side brush to the designated post on the underside of the robot. Ensure the main brush and its cover are correctly installed.
- Wassertanks füllen: Fill the clean water tank in the Omni Station with clean water. If desired, add the provided cleaning solution to the solution tank.
- Place Robot on Station: Place the robot onto the Omni Station. It will begin charging automatically.
- Laden Sie die App herunter: Download the Yeedi app from your smartphone's app store. Follow the in-app instructions to connect your robot to your 2.4GHz Wi-Fi network.
Video: Ein überview of the YEEDI S20 Infinity Ultra Robotic Vacuum and Mop, demonstrating its features and setup process.
Bedienungsanleitung
The Yeedi S20 Infinity Ultra offers various cleaning modes and smart features for efficient floor care.
Reinigungsmodi
- Automatische Reinigung: The robot intelligently maps your home and cleans all accessible areas.
- Bereich reinigen: Select specific rooms or zones to clean via the Yeedi app.
- Fleckenreinigung: Direct the robot to clean a concentrated area for spills or localized dirt.
- Benutzerdefinierte Reinigung: Adjust suction power, water flow, and cleaning frequency through the app.
FocusJet Stain Pre-Dissolving Technology
This technology sprays a targeted fine mist onto tough stains before mopping, allowing them to break down for more effective removal.
Image: The robot vacuum applying FocusJet Stain Pre-Dissolving Technology to a floor stain.
Image: Visual representation of the three steps of FocusJet technology: Spray, Dissolve, and Roll.
Mop Roller Smart Cover
The Mop Roller Smart Cover automatically shields the mop roller when the robot detects carpets or non-mopping zones, preventing wetting and cross-contamination.
Image: The robot vacuum demonstrating its mop roller lifting mechanism over a carpet.
AI Obstacle Avoidance
Equipped with RGBD AI obstacle avoidance technology, the robot identifies and navigates around furniture, toys, and other obstacles in real-time. It also recognizes stains and large particles, adjusting cleaning intensity as needed.
Image: The robot vacuum using AI to avoid obstacles and clean edges.
Wartung
Regular maintenance ensures the longevity and optimal performance of your Yeedi S20 Infinity Ultra.
Omni Station Maintenance
- Leeren Schmutzwassertank: Regularly empty the dirty water tank in the Omni Station. Rinse it with clean water.
- Frischwassertank auffüllen: Ensure the clean water tank is always filled for mopping operations.
- Staubbeutel prüfen: Replace the dust bag in the Omni Station when indicated by the app or when full.
- Clean Station Base: Periodically clean the base of the Omni Station to remove any accumulated dirt or debris.
Image: The 10-in-1 Smart Cleaning Station, illustrating its various automated maintenance functions.
Roboterwartung
- Clean Mop Roller: The Omni Station automatically washes and hot-air dries the mop roller. Ensure the roller is free from debris.
- Seitenbürste reinigen: Remove and clean the side brush regularly to prevent hair entanglement.
- Hauptbürste reinigen: Remove the main brush and clean any hair or debris wrapped around it.
- Filter reinigen: Tap out or rinse the robot's filter as needed. Allow to air dry completely before reinserting.
- Wischsensoren: Use a dry cloth to wipe the robot's sensors to ensure accurate navigation.
Image: Close-up of the robot's underside, highlighting the Airflow-Directed Anti-Tangle Main Brush and ARClean Anti-Tangle Side Brush.
Fehlerbehebung
If you encounter issues with your Yeedi S20 Infinity Ultra, refer to the following common solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Der Roboter startet nicht und reagiert nicht. | Niedriger Batteriestand; Netzschalter ausgeschaltet; Roboter blockiert. | Ensure robot is fully charged. Check if the power switch is on. Clear any obstructions. |
| Mangelhafte Reinigungsleistung. | Full dustbin; clogged brushes; dirty filter; low water in tank. | Empty dustbin. Clean main and side brushes. Clean or replace filter. Refill clean water tank. |
| Der Roboter bleibt häufig stecken. | Obstacles in path; dirty sensors; uneven surfaces. | Clear cables, toys, and other small items. Wipe all sensors with a dry cloth. Ensure cleaning area is suitable. |
| Mop leaves streaks or doesn't clean effectively. | Dirty mop roller; insufficient water; incorrect cleaning solution. | Ensure mop roller is clean and properly installed. Check clean water tank level. Use only recommended cleaning solutions. |
| Es kann keine Verbindung zum WLAN hergestellt werden. | Incorrect Wi-Fi band; wrong password; router issues. | Ensure you are connecting to a 2.4GHz Wi-Fi network. Double-check password. Restart router and robot. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Marke | Yeedi |
| Modellname | YEEDI S20 Infinity Ultra |
| Oberflächenempfehlung | Hard Floors & Carpets |
| Saugleistung | 22000Pa |
| Besondere Merkmale | FocusJet Technology, Mop Roller Smart Cover, OZMO ROLLER 3.0, PowerBoot PLUS, AI Obstacle Avoidance |
| Farbe | Schwarz |
| Controllertyp | App-Steuerung |
| Akkulaufzeit | Up to 5461 minutes (under specific conditions) |
| Akku-Typ | Lithium-Ionen |
| Bandtage | 110 Volt |
| Fassungsvermögen des Staubbehälters | 2.5 Liters (Omni Station dust bag) |
| Artikelabmessungen (L x B x H) | Robot: 13.9"L x 13.82"W x 3.86"H, Station: 13.31"L x 18.07"W x 19.69"H |
| Im Lieferumfang enthaltene Komponenten | Robot, OMNI Station, Power cord, User Manual, Quick guide, Side Brush, Main Brush & Cover, Filter, Dust Bag, Cleaning Solution (260mL), Heavy Duty Cleaning Solution (260mL), Auxiliary Compartment Auto-Fill Module, Ordinary Roller Mop, Clean Water Tank, Dirty Water Tank |
| UPC | 850066464304 |
Image: Dimensions of the Yeedi S20 Infinity Ultra robot and its Omni Station.
Garantie und Support
Yeedi provides comprehensive support for its products.
- Garantie: Yeedi offers a 1-year coverage for any manufacturing defects or quality issues.
- Widerrufsfolgen: A 30-day free return policy is available through Amazon.
- Kundendienst: For any issues or assistance, contact Yeedi customer support. Issues can often be resolved with guidance or replacement parts.
- Qualitätssicherung: Every product undergoes strict quality checks to ensure reliability.
For further assistance, please visit the official Yeedi webWebsite oder wenden Sie sich direkt an den Kundendienst.