Electronic Watch DT-6507 User Manual

1. Einleitung

The Electronic Watch DT-6507 is a versatile mirror LED alarm clock designed for desktop use. It features a bright green LED display, automatic temperature measurement, and an automatic brightness reduction function for nighttime viewing. This manual provides instructions for setting up, operating, and maintaining your DT-6507 electronic watch.

2. Packungsinhalt

• Electronic Watch DT-6507 (with green digits)
• USB-A power cable (adapter sold separately)
• Montagefuß
• Benutzerhandbuch (dieses Dokument)

3. Einrichtung

3.1 Einschalten des Geräts

The DT-6507 can be powered in two ways:

1. USB-Stromversorgung: Connect the provided USB-A cable to the DC input port on the back of the clock. Plug the other end into a compatible USB power adapter (not included) and then into a wall outlet.
2. Batterie-Backup: For memory function and to prevent time settings from being lost during power outages, install 3 AAA batteries (not included) into the battery compartment on the back of the clock. Note: Batteries alone will not power the main display continuously; they primarily serve as backup for settings.

Abbildung 3.1: Rückseite view with power input and battery compartment.

3.2 Placing the Clock

Attach the included mounting foot to the bottom of the clock for stable desktop placement. Ensure the clock is placed on a flat, stable surface.

Abbildung 3.2: Vorderseite view of the DT-6507 clock.

4. Bedienungsanleitung

4.1 Steuertasten

The clock features five function buttons located on the top:

• MODUS: Used to switch between display modes and enter setting modes.
• ALARM: Dient zum Einstellen und Aktivieren/Deaktivieren des Alarms.
• SNZ/LIGHT: Used for snooze function during an alarm and to adjust display brightness.
• UP: Used to increase values during setting or navigate menus.
• NIEDER: Used to decrease values during setting or navigate menus.

Abbildung 4.1: Oben view mit Bedienknöpfen.

4.2 Anzeigemodi

The clock automatically cycles through different display modes:

1. Zeitanzeige: Shows hours and minutes for 10 seconds.
2. Datumsanzeige: Shows month and day for 2 seconds.
3. Temperaturanzeige: Shows the current temperature for 2 seconds.

The cycle then repeats starting with the Time Display.

4.3 Uhrzeit und Datum einstellen

Drücken Sie die MODUS Taste zum Aufrufen des Zeiteinstellungsmodus. Verwenden Sie die UP Und RUNTER Tasten zum Einstellen von Stunden und Minuten. Drücken MODUS again to confirm and move to the next setting (e.g., 12/24 hour format, date).

4.4 Wecker stellen

Drücken Sie die ALARM Taste zum Aufrufen des Alarmeinstellungsmodus. Verwenden Sie die UP Und RUNTER Tasten zum Einstellen der gewünschten Alarmzeit. Drücken ALARM again to activate or deactivate the alarm. An 'AL' indicator will appear on the display when the alarm is active.

Figure 4.2: Display showing 'OFF' when alarm is deactivated.

4.5 Helligkeitseinstellung

The clock features an automatic brightness reduction function at night for comfortable viewing. You can also manually adjust the brightness using the SNZ/LICHT Taste.

5. Wartung

To ensure the longevity and optimal performance of your DT-6507 electronic watch:

• Reinigung: Wipe the mirror display and plastic case with a soft, dry cloth. Avoid abrasive cleaners or solvents that may damage the surface.
• Umfeld: Die Uhr sollte nicht direktem Sonnenlicht, extremen Temperaturen oder hoher Luftfeuchtigkeit ausgesetzt sein.
• Batteriewechsel: Replace the AAA backup batteries periodically (e.g., once a year) to ensure settings are retained during power interruptions.

6. Fehlerbehebung

6.1 Time Resets After Power Loss

If the time and settings reset every time the clock is disconnected from power, ensure that 3 AAA backup batteries are correctly installed in the battery compartment. These batteries are crucial for retaining settings when the main USB power is interrupted.

6.2 Anzeige funktioniert nicht

Check if the USB power cable is securely connected to both the clock and the power adapter, and that the adapter is plugged into a working electrical outlet.

7. Spezifikationen

8. Benutzertipps

• For continuous display and alarm functionality, always ensure the clock is connected to a USB power source.
• Install fresh AAA batteries for the memory function to avoid re-setting the time and alarm after power interruptions.
• The mirror surface can be used for quick checks, but remember it's primarily a clock display.

9. Garantie und Support

Specific warranty information for this product is not provided in the available documentation. For any questions, technical support, or warranty inquiries, please contact the seller or retailer from whom you purchased the product.