Einführung
This manual provides detailed instructions for the installation, operation, and maintenance of your Dahua IPC-HDBW1430DE-SW 4MP IR Fixed-focal Wi-Fi Dome Network Camera. Please read this manual thoroughly before using the product and retain it for future reference.
Hauptmerkmale
- 4-MP 1/3" CMOS image sensor for low luminance and high-definition images.
- Ausgänge max. 4 MP (2560 × 1440) bei 20 fps und max. unterstützt 3 MP (2304 × 1296) bei 25/30 fps.
- H.265 codec for high compression rate and ultra-low bit rate.
- Built-in IR LED for night vision.
- SMART H.264+/H.265+ flexible coding for various bandwidth and storage environments.
- DWDR, 3D NR, BLC, digital watermarking for various monitoring scenes.
- Anomalieerkennung: Bewegungserkennung, Video tampEring, keine SD-Karte, SD-Karte voll, SD-Kartenfehler, Netzwerktrennung, IP-Konflikt, illegaler Zugriff, SMD (Mensch).
- Supports single antenna 2.4G Wi-Fi with a range of up to 80 m in an open area.
- Supports max. 256 G Micro SD card (sold separately).
- 12 VDC Stromversorgung.
- IP67 and IK10 protection for outdoor and vandal-resistant use.
Setup und Installation
Packungsinhalt
Stellen Sie sicher, dass alle Komponenten vorhanden sind:
- Dahua IPC-HDBW1430DE-SW IP Camera
- Montagezubehör
- Kurzanleitung
- Power Adapter (if included with your specific model/region)
Physische Installation
The camera features IP67 weather protection and IK10 vandal resistance, making it suitable for outdoor installation. Refer to the dimensional drawing for precise measurements for mounting.
Stromanschluss
Connect the camera to a 12 VDC power supply. Ensure the power source meets the camera's requirements (DC12V, 2A).
Netzwerkverbindung
The camera supports Wi-Fi (IEEE802.11b/g/n 2.4–2.4835 GHz) for wireless connectivity. It also has an RJ-45 (10/100 Base-T) network port for wired connection.
Initial Access and Configuration
- Connect the camera to your network (wired or wirelessly).
- Öffnen Sie ein web browser (IE, Chrome, Firefox) and enter the camera's IP address (default is often 192.168.1.108, but may vary).
- You will be prompted to log in. The default username is typically 'admin'. You will need to set a strong password upon first login.
- Once logged in, navigate to the 'Setting' section to configure the camera.
Betrieb
Wi-Fi-Konfiguration
To connect the camera to your Wi-Fi network:
- Im web Schnittstelle, gehen Sie zu Setting > Network > WIFI.
- Aktivieren Sie WLAN.
- Scan for available networks and select your SSID.
- Enter the Wi-Fi password and save the settings.
Videoeinstellungen
Adjust video encoding, resolution, and frame rate:
- Navigieren Sie zu Setting > Camera > Video.
- Configure Main Stream and Sub Stream settings, including Encode Mode (H.265 recommended), Resolution (up to 2560x1440), Frame Rate, and Bit Rate.
Audioeinstellungen
Configure audio input and output:
- Gehe zu Setting > Camera > Audio.
- Enable audio for Main Stream and Sub Stream.
- Adjust Audio Type (Mic), Noise Filter, Microphone Volume, and Speaker Volume.
Motion Detection and Smart Motion Detection (SMD)
The camera supports both standard motion detection and Smart Motion Detection (SMD) for human target recognition.
- For basic motion detection, go to Setting > Event > Video Detection > Motion Detection. Enable it, set the period, and define detection areas.
- For SMD, navigate to Setting > Event > Smart Motion Detection. Enable it and select 'Human' as the effective object. Adjust sensitivity as needed.
Lagerung
The camera supports a Micro SD card (up to 256GB, sold separately) for local storage. Insert the SD card into the designated slot. You can manage storage settings under Setting > Storage > Destination.
P2P Access
For remote access via mobile apps (iOS/Android), configure P2P settings:
- Gehe zu Setting > Network > Access Platform > P2P.
- Enable P2P and scan the QR code with your mobile client (e.g., DMSS app).
Allgemeine Systemeinstellungen
To change the camera's name or language:
- Navigieren Sie zu Setting > System > General.
- Modify the device name or select a different language from the dropdown menu.
Image Conditions
Adjust image parameters like backlight compensation (BLC, DWDR) and white balance:
- Gehe zu Setting > Camera > Conditions.
- Wählen Sie einen Profifile (e.g., Day) and adjust settings like Backlight Mode.
Videodemonstration
Wartung
Reinigung
Regularly clean the camera lens and housing with a soft, dry cloth. For stubborn dirt, use a mild cleaning solution and a soft cloth, then wipe dry. Avoid abrasive cleaners or solvents that could damage the camera's finish or lens coating.
Firmware-Aktualisierungen
Überprüfen Sie regelmäßig die Dahua-Behörde website for firmware updates. Keeping your camera's firmware up-to-date ensures optimal performance, security, and access to new features. Follow the instructions provided with the firmware update package carefully.
Umweltaspekte
While the camera is IP67 and IK10 rated, extreme environmental conditions (e.g., prolonged exposure to direct sunlight in very hot climates, or severe icing) can affect its lifespan. Ensure proper installation to minimize such exposure.
Fehlerbehebung
- Kein Strom: Überprüfen Sie Netzteil und Kabelanschlüsse. Stellen Sie sicher, dass die Steckdose funktioniert.
- Keine Netzwerkverbindung: Verify Wi-Fi settings (SSID, password) or check the Ethernet cable connection. Ensure your router is working correctly.
- Kein Zugriff möglich Web Schnittstelle: Confirm the camera's IP address is correct and your computer is on the same network segment. Try pinging the camera's IP address.
- Schlechte Bildqualität: Check the lens for dirt or condensation. Adjust video settings (resolution, bit rate) in the web interface. Ensure adequate lighting.
- SD Card Error/Full: Check if the SD card is properly inserted. Format the SD card via the web interface if necessary. Replace the SD card if it's faulty.
- Bewegungserkennung löst nicht aus: Verify motion detection settings are enabled and the detection area is correctly configured. Adjust sensitivity if needed.
- IP-Konflikt: If you receive an IP conflict error, change the camera's IP address to a unique one within your network.
Technische Daten
| Kategorie | Besonderheit | Spezifikation |
|---|---|---|
| Kamera | Bildsensor | 1/3" CMOS |
| Max. Auflösung | 2560 (H) × 1440 (V) | |
| Min. Beleuchtung | 0.025 lux@F2.0 (Color,30 IRE); 0.0025 lux@F2.0 (B/W,30 IRE); 0 lux (Illuminator on) | |
| IR-Entfernung | 30 m (98.43 Fuß) (IR-LED) | |
| Signal-Rausch-Verhältnis | >56 dB | |
| Elektronische Verschlussgeschwindigkeit | Auto/Manuell 1/3 s–1/100,000 s | |
| Scansystem | Progressiv | |
| Linse | Objektivtyp | Festfokus |
| Brennweite | 2.8mm; 3.6 mm | |
| Max. Öffnung | F2.0 | |
| Fachgebiet View (2.8 mm) | H: 90°; V: 50°; D: 107° | |
| Fachgebiet View (3.6 mm) | H: 76°; V: 40°; D: 92° | |
| Video | Videokomprimierung | H.264B; H.264; H.264H; H.265 |
| Smart Codec | Intelligentes H.265+; Intelligentes H.264+ | |
| Main Stream Frame Rate | 2560 × 1440@ (1–20 fps) | |
| Sub Stream Frame Rate | 704 × 576@ (1–25 fps); 704 × 480@ (1–30 fps) | |
| Auflösung | 2560 × 1440; 2304 × 1296; 1080p; 1.3M; 720p | |
| Bitratensteuerung | CBR/VBR | |
| Video Bit Rate | H264: 24 kbps–4096 kbps; H265: 9 kbps–4096 kbps | |
| Alarm | Alarmereignis | Keine SD-Karte; SD-Karte voll; SD-Kartenfehler; Netzwerktrennung; IP-Konflikt; illegaler Zugriff; Bewegungserkennung; Video tampering; SMD (human) |
| Netzwerk | Netzwerkport | RJ-45 (10/100 Base-T) |
| W-lan | IEEE802.11b/g/n 2.4–2.4835 GHz | |
| Drahtlose Reichweite | Bis zu 80 m (offenes Gelände) | |
| Netzwerk-Protokoll | IPv4; HTTP; TCP; UDP; ARP; RTP; RTSP; RTCP; DHCP; DNS; NTP; Multicast; RTMP | |
| Interoperabilität | ONVIF (Profile S/Profile G); CGI; P2P | |
| Lagerung | Micro-SD-Karte (unterstützt max. 256 GB, separat erhältlich) | |
| Browserunterstützung | IE, Chrome, Firefox | |
| Mobiler Client | iOS; Android | |
| Leistung | Stromversorgung | 12 V Gleichstrom |
| Energieaufnahme | Basic: 2 W; Max: 4.9 W (H.265+IR intensity) | |
| Umfeld | Betriebstemperatur | –40 °C bis +60 °C (–40 °F bis +140 °F) |
| Luftfeuchtigkeit bei Betrieb | ≤ 95 % | |
| Lagertemperatur | –30 °C bis +60 °C (–22 °F bis +140 °F) | |
| Schutz | IP67; IK10 | |
| Struktur | Casing | Metall |
| Technische Daten | Φ110.7 mm × 88.7 mm (Φ4.33" × 3.49") | |
| Nettogewicht | 414 g | |
| Bruttogewicht | 592 g | |
| Zertifizierung | Zertifizierungen | CE-LVD: EN62368-1; CE-EMC: 2014/30/EU; CE-RED: 2014/53/EU; FCC: 47 CFR FCC Part 15, Subpart B; FCC ID: FCC PART 15C |
Benutzertipps
- Verwendung im Außenbereich: The camera's IP67 and IK10 ratings confirm its suitability for outdoor installation and resistance to water and impact. This makes it a good choice for external surveillance needs.
- Kapazität der SD-Karte: While the camera supports up to 256GB Micro SD cards, consider the recording duration needed. For continuous recording or high-resolution settings, a larger capacity card is beneficial.
- Wi-Fi Reichweite: The stated 80m Wi-Fi range is for open areas. Obstacles like walls and other electronic devices will reduce this range. Test signal strength before final installation.
Garantie und Support
Informationen zu Garantie, technischem Support oder Serviceanfragen finden Sie auf der offiziellen Dahua-Website. website or contact your authorized dealer. Keep your purchase receipt and product serial number handy when seeking support.
