EasyGuard Plug and Play Remote Starter for BMW F-Series

Einführung

This manual provides detailed instructions for the installation and operation of the EasyGuard ECS002PP-BM-FM1B remote starter. This system allows you to remotely start and stop your compatible BMW F-Series vehicle using your existing factory OEM key fob. It is designed for plug-and-play installation, minimizing the need for complex wiring modifications.

Wichtige Hinweise und Sicherheitsinformationen

• This product is specifically designed for BMW F-Series vehicles (2011-2018) that are equipped with a factory OEM push start button. It is not compatible with BMW E-series cars.
• Installation requires unplugging existing car pins and replacing them with pins from the EasyGuard remote starter kit. Ensure you are comfortable with this process or seek professional assistance.
• Two working factory key fobs are required for installation. One key fob will be placed inside the bypass module, and the other will be used for remote control functions.
• Professional installation by a trained car alarm installer or locksmith is highly recommended, especially if you lack experience with vehicle electronics.
• No additional programming of car keys is required after the wiring connection is complete.
• The engine will automatically turn off during the remote start run-time if any door is opened for safety.
• The remote starter will not attempt to start the vehicle if the battery voltage liegt unter 11 Volt.
• The remote start runtime is user-programmable to 10, 20, 30, or 40 minutes (default is 20 minutes).

For detailed wiring diagrams, please refer to the relevant sections in this manual.

Packungsinhalt

Bitte überprüfen Sie beim Öffnen des Pakets, ob alle Artikel vorhanden und unbeschädigt sind:

• Steuermodul
• Bypass-Modul
• Plug-and-Play Wire Harness
• Bypass Wire
• Battery Board (choose one to use)

Video 1: Auspacken und überview of EasyGuard remote starter components.

Kompatibilität

This remote starter is compatible with specific BMW F-Series and G-Series models from 2010-2020 that feature a factory OEM push start button. Please consult the tables below to confirm your vehicle's compatibility.

Compatible Vehicles (FEM Platform)

Note: All listed vehicles must be equipped with a factory OEM push start button.

Compatible Vehicles (BDC1/BDC2/BDC3 Platform)

Setup und Installation

Installation of the EasyGuard remote starter involves several steps, primarily focusing on connecting the module to your vehicle's existing wiring system. It is crucial to follow these instructions carefully or consult a professional installer.

1. Bereiten Sie die Installation vor

1. Whole Car Power Cut Off: Dismantle the trunk panel and disconnect the car battery negative terminal to cut off power to the entire vehicle.
2. Locate BDC Module: Find the BDC module in your vehicle. This is typically located in the passenger footwell area.

2. Wiring Instructions Overview

The following diagrams illustrate the main connection points on the BDC module. Specific wiring details for different vehicle platforms (FEM, BDC1) are provided below.

3. Detailed Wiring Connections

Connect the EasyGuard harness wires to the corresponding pins on your vehicle's BDC module as detailed below:

• Oil Tank (4B 54Pin No.16):
  Insert the product's brown wire into the original PIN 16 with the socket. Plug the product's black cable into the 54P black cable.

• GND / 12V Constant:
  Connect the GND (ground) wire to a car body screw. Insert the product's power wire into the original car fuse hole for 12V constant power.

• Door Trigger / Foot Brake (2B 42Pin No.30 / 3B 52Pin No.22):
  Connect the door trigger wire to Pin 30 (New BMW) and the foot brake wire to Pin 22.

• CAN BUS Wire (8B 54Pin No.51 CANL & No.52 CANH):
  Refer to the main wiring diagram for specific CAN BUS connections.

• Push Start Button (7B 54Pin No.45 & No.49):
  Refer to the main wiring diagram for specific push start button connections.

4. Bypass Module Installation

The bypass module requires one of your factory OEM key fobs to be placed inside it. Follow these steps:

1. Carefully open your factory key fob.
2. Raise the contact spring slightly to ensure good contact with the battery board.
3. Insert the battery board into the bypass module.
4. Connect the ribbon cable from the bypass module to the key fob's circuit board.
5. Secure the key fob inside the bypass module with adhesive tape, ensuring the key button side faces up.

5. Fixed Control Module

Once all wiring is complete, securely fix the control module in a suitable location, such as behind the BDC module or in an accessible cavity.

6. Important Installation Reminders

• Ensure all car pins are correctly unplugged and replaced with the corresponding pins from the EasyGuard kit.
• If you lack alarm installation experience, have a trained professional install the kit.
• No programming is needed after the wiring connection is finalized.

Bedienungsanleitung

The EasyGuard remote starter utilizes your vehicle's original OEM key fob for remote start and stop functions.

Fernstart

To remotely start your vehicle:

• Drücken Sie die Lock button three times on your factory OEM key fob.

Remote start allows you to pre-cool your vehicle in hot weather or pre-warm it in cold weather, enhancing comfort before you enter.

Remote Shut Off

To remotely shut off your vehicle after a remote start cycle:

• Drücken Sie die Trunk button three times on your factory OEM key fob.

Benutzertipps

• Key Fob Requirement: Always ensure you have two functional factory key fobs before starting the installation. One will be integrated into the bypass module.
• Professionelle Installation: If you are not confident with automotive electrical work, it is strongly advised to have the system installed by a certified professional to avoid potential damage to your vehicle or the product.
• Keine Programmierkenntnisse erforderlich: Ein bedeutender Vorteiltage of this system is that it does not require any complex key programming after the physical wiring is completed.
• Sicherheitsfunktion: Remember that the engine will automatically shut off if a door is opened during a remote start cycle. This is a safety feature to prevent unauthorized driving.
• Adjust Runtime: You can customize the remote start duration (10, 20, 30, or 40 minutes) to suit your needs. Refer to the full user manual for instructions on how to program this setting.
• Smartphone Control (Optional): For advanced control via a smartphone app, an additional 4G LTE module is required and must be purchased separately.

Technische Daten

Wartung

The EasyGuard remote starter is designed for minimal maintenance. Follow these general guidelines to ensure longevity:

• Keep the control and bypass modules dry and free from excessive dust or debris.
• Avoid exposing the modules to extreme temperatures or direct sunlight for prolonged periods.
• Überprüfen Sie regelmäßig alle Kabelverbindungen, um sicherzustellen, dass sie fest sitzen.
• If you notice any unusual behavior, consult the troubleshooting section or contact customer support.

Fehlerbehebung

If you encounter issues with your EasyGuard remote starter, consider the following common problems and solutions:

• System does not respond to remote commands:
  - Ensure your vehicle's battery voltage is above 11 volts. A low battery will prevent remote start.
  - Check if your factory key fob battery is working correctly.
  - Verify that the key fob placed in the bypass module has a working battery and is correctly seated.
• Engine starts but immediately shuts off:
  - Confirm all doors, hood, and trunk are fully closed before attempting remote start.
  - Check if any door was opened during the remote start cycle (this will trigger an automatic shutdown).
• Remote start function is inconsistent:
  - Ensure you are pressing the lock/trunk button exactly three times in quick succession.
  - Check for any potential radio frequency interference in your area.
  - Verify all wiring connections are secure and free from corrosion.
• Vehicle does not start after remote start command:
  - Ensure the vehicle is in Park (P) and the parking brake is engaged (if applicable).
  - Check for any active warning lights on the dashboard that might prevent starting.

If these steps do not resolve the issue, please contact EasyGuard customer support for further assistance.

Garantie und Support

Qualitätsgarantie

EasyGuard products come with a 12-month warranty covering quality-related issues from the date of purchase. This warranty ensures that all products are brand new, unused, and in original packaging. The warranty does not cover damages caused by improper use.

Kostenloser Kunden-Support

If you require assistance with your EasyGuard product, our support team is available to help. When contacting support, please have your EasyGuard product readily available for efficient troubleshooting.

• Technische Unterstützung: Available 7x24 hours.
• Kontaktinformationen: Refer to the seller's store page or product listing for the most current contact details.