Ourlife 1200Mbps Dualband-WLAN-Repeater – Benutzerhandbuch

1. Einleitung

Vielen Dank, dass Sie sich für O entschieden haben.urlife 1200Mbps Dual-Band WiFi Repeater. This device is designed to enhance your wireless network experience by extending Wi-Fi coverage, boosting signal strength, and eliminating dead zones in your home or office. It offers versatile functionality, operating as a Wi-Fi Repeater, Wireless Access Point (AP), or Router, and supports both 2.4GHz and 5GHz frequency bands for high-speed and stable internet connectivity.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device. Please read it thoroughly before use to ensure optimal performance and safety.

2. Sicherheitshinweise

• Ensure the device is used in a dry environment, away from water or excessive humidity.
• Setzen Sie das Gerät keinen extremen Temperaturen oder direkter Sonneneinstrahlung aus.
• Verwenden Sie ausschließlich das mitgelieferte oder vom Hersteller angegebene Netzteil.
• Avoid placing the device near heat sources or in enclosed spaces that may hinder ventilation.
• Do not attempt to open, disassemble, or modify the device. This will void the warranty and may cause damage or injury.
• Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf.
• Disconnect the device from the power outlet during lightning storms or when unused for long periods.

3. Packungsinhalt

Das Paket beinhaltet typischerweise:

• Ourlife 1200Mbps Dual-Band WiFi Repeater
• Benutzerhandbuch (dieses Dokument)
• Ethernet-Kabel (kann je nach Verpackung variieren)

Please check the contents upon unpacking. If any items are missing or damaged, contact your retailer.

4. Produktüberschreitungview

Das Ourlife WiFi Repeater features a compact design with six adjustable high-gain external antennas to maximize signal coverage. It includes LED indicators for power, Wi-Fi status, and signal strength, along with a WPS button for quick setup and Ethernet ports for wired connections.

5. Einrichtung und Installation

Das Ourlife WiFi Repeater offers a simple plug-and-play setup. You can configure it using the WPS button for quick connection or through a web browser for more detailed settings.

5.1 Schnelleinrichtung mit WPS

1. Plug the WiFi Repeater into a power outlet near your existing router.
2. Wait for the Power LED to turn solid.
3. Drücken Sie die WPS-Taste an Ihrem Hauptrouter.
4. Within 2 minutes, press the WPS button on the Ourlife WiFi Repeater.
5. The Repeater's Wi-Fi LED should start blinking and then turn solid, indicating a successful connection. This process typically takes about 8 seconds.
6. Once connected, you can unplug the repeater and move it to a desired location within your router's Wi-Fi range but closer to the dead zone.

Note: If your router does not support WPS, or if you prefer manual configuration, proceed to the Web Browser Setup section.

5.2 Web Browser Setup (for Repeater, AP, or Router Mode)

1. Stecken Sie den WLAN-Repeater in eine Steckdose.
2. Connect your computer or mobile device to the repeater's default Wi-Fi network (e.g., "Ourlife_XXXX" or similar, check the label on the device). No password is required initially.
3. Öffnen Sie ein web browser and enter the default IP address (usually 192.168.1.1 or 192.168.0.1, or a specific domain like "repeater.net" - check the device label or manual for the exact address).
4. Log in using the default username and password (usually "admin" for both, check the device label).
5. Follow the on-screen instructions to select your desired operating mode (Repeater, AP, or Router) and configure the network settings.
6. For Repeater Mode: Select your existing Wi-Fi network, enter its password, and choose a new name for the extended network (or keep the same name).
7. For AP Mode: Connect an Ethernet cable from your main router to the repeater's WAN/LAN port. The repeater will create a new wireless network.
8. For Router Mode: Connect the internet source (e.g., modem) to the repeater's WAN port. The repeater will act as your main router.
9. Speichern Sie Ihre Einstellungen und starten Sie das Gerät gegebenenfalls neu.

6. Betriebsarten

Das Ourlife WiFi Repeater supports three primary operating modes:

6.1 Repeater-Modus

In Repeater Mode, the device extends the coverage of an existing wireless network. It receives the Wi-Fi signal from your main router and re-broadcasts it, effectively expanding the range and eliminating Wi-Fi dead zones. This mode is ideal for large homes or offices where the main router's signal doesn't reach all areas.

6.2 AP-Modus (Access Point)

AP Mode converts a wired network connection into a wireless one. If you have an Ethernet port in a room with no Wi-Fi, you can connect the repeater to that port via an Ethernet cable. The repeater will then create a new wireless network, allowing wireless devices to connect to the internet. This mode is plug-and-play and does not require complex setup.

6.3 Router-Modus

In Router Mode, the device acts as a primary router, creating a new private wireless AC network. You would connect your internet source (e.g., a DSL/Cable modem) directly to the repeater's WAN port. This mode is suitable for setting up a new network or replacing an existing router.

7. Wartung

• Reinigung: Reinigen Sie das Gerät mit einem weichen, trockenen Tuch. Verwenden Sie keine flüssigen oder Aerosol-Reinigungsmittel.
• Firmware-Updates: Überprüfen Sie regelmäßig die Herstellerangaben. website for firmware updates. Keeping your device's firmware up-to-date can improve performance, stability, and security.
• Neustart: Sollten Netzwerkprobleme auftreten, versuchen Sie, den Repeater neu zu starten, indem Sie ihn für 10 Sekunden vom Stromnetz trennen und ihn dann wieder anschließen.
• Zurücksetzen: If the device is not functioning correctly, you may need to perform a factory reset. Locate the reset button (usually a small pinhole) and press and hold it for about 5-10 seconds until the LEDs flash. Note that a factory reset will erase all custom settings, and you will need to reconfigure the device.

8. Fehlerbehebung

Q: The repeater is not powering on.

A: Ensure the power adapter is securely plugged into both the repeater and a working power outlet. Try a different outlet to rule out power supply issues.

Q: I cannot connect to the repeater's Wi-Fi network.

A: Make sure the repeater is powered on and its Wi-Fi LED is active. If you're connecting for the first time, look for the default network name (SSID) printed on the device. If you've changed the network name and password, ensure you're using the correct credentials. Try resetting the device to factory defaults and reconfiguring.

Q: The extended Wi-Fi signal is weak or unstable.

A: The repeater might be placed too far from your main router. Try moving the repeater to a location halfway between your router and the area with poor coverage. Ensure there are no major obstructions (thick walls, large metal objects) between the repeater and your devices or the main router. Adjust the external antennas for better reception.

Q: I forgot the login password for the web Verwaltungsseite.

A: You will need to perform a factory reset on the device. This will revert the login credentials to the default "admin/admin" (or as printed on the device label) and erase all custom settings. You will then need to reconfigure the repeater.

Q: My internet speed is slow when connected to the repeater.

A: Ensure the repeater is placed in an optimal location to receive a strong signal from your main router. Check if there are many devices connected to the extended network. If using Repeater Mode, the speed can be halved as the device is both receiving and transmitting on the same channel. Consider using AP Mode if you have a wired connection available.

9. Spezifikationen

Hinweis zu den Varianten: A 300Mbps 2.4G only variant of this repeater is also available. The specifications above primarily refer to the 1200Mbps Dual-Band model.

10. Benutzertipps

• Optimale Platzierung: For best results in Repeater Mode, place the device roughly halfway between your main router and the area where you need improved Wi-Fi coverage. Ensure it receives at least a moderate signal from the main router.
• Antenneneinstellung: Experiment with the 180° adjustable antennas to find the best orientation for signal strength and coverage in your environment.
• Dualband-Advantage: Utilize the 5GHz band for high-bandwidth activities like streaming 4K video or online gaming, and the 2.4GHz band for general browsing and devices further away, as 2.4GHz has better penetration through walls.
• WPS-Komfort: If your main router supports WPS, use the WPS button for a quick and hassle-free setup.
• Kabelverbindungen: Use the Ethernet ports to connect wired devices (like smart TVs, gaming consoles, or desktop PCs) to the extended network for a more stable and faster connection.

11. Garantie und Support

Ourlife products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase or visit the official Ourlwenn webBewahren Sie Ihren Kaufbeleg als Kaufnachweis für Garantieansprüche auf.