MIBOXER PUSH Wireless Brightness Dimming Panel User Manual

1. Produktüberschreitungview

The MIBOXER PUSH Wireless Brightness Dimming Panel is a 2.4GHz wireless control device designed to adjust the brightness of compatible MiBoxer/Mi-Light 2.4G series lamps and controllers. It is available in two models: PUSH3 (1 GANG) for single-zone control and PUSH3-2 (2 GANG) for dual-zone control.

2. Einrichtung

2.1 Einlegen der Batterie

The PUSH Wireless Dimming Panel is powered by a CR2032 battery. To install or replace the battery:

1. Carefully remove the back cover of the panel.
2. Setzen Sie eine neue CR2032-Batterie ein und achten Sie dabei auf die richtige Polarität (+/-).
3. Bringen Sie die hintere Abdeckung wieder fest an.

2.2 Koppeln mit Geräten

The PUSH panel uses 2.4GHz wireless transmission technology to communicate with compatible MiBoxer/Mi-Light 2.4G series lamps and controllers. The pairing process typically involves:

1. Ensure the target lighting device (lamp or controller) is powered on and in pairing mode (refer to the device's specific manual for details).
2. On the PUSH panel, perform the pairing sequence (e.g., a specific button press combination or holding a button).
3. Once successfully paired, the lighting device may flash or change color to indicate a successful connection.

Note: The exact pairing procedure may vary slightly depending on the specific MiBoxer/Mi-Light device you are connecting to. Always consult the manual of the receiving device for precise instructions.

3. Bedienungsanleitung

3.1 PUSH3 (1 GANG) Operation

The PUSH3 panel provides single-zone control for brightness adjustment.

• Kurzes Drücken: To turn the light ON or OFF.
• Lange drücken: To adjust the light brightness (dimming up or down).

3.2 PUSH3-2 (2 GANG) Operation

The PUSH3-2 panel offers group control, allowing you to manage lights in two different areas or zones independently.

• Each 'gang' or button corresponds to a separate control zone (Zone 1 and Zone 2).
• Short Press (on either gang): To turn the lights in that specific zone ON or OFF.
• Long Press (on either gang): To adjust the light brightness (dimming up or down) for the corresponding zone.

4. Wartung

• Reinigung: Use a soft, dry cloth to clean the panel surface. Avoid using abrasive cleaners or solvents.
• Batteriewechsel: Replace the CR2032 battery when the panel's response becomes sluggish or stops working. Refer to Section 2.1 for battery installation.
• Lagerung: If storing the device for an extended period, remove the battery to prevent leakage.

5. Fehlerbehebung

• Panel not responding:
  • Check if the CR2032 battery is correctly installed and has sufficient charge. Replace if necessary.
  • Ensure the panel is within the 30m control distance of the paired lighting device.
  • Re-pair the panel with the lighting device if the connection seems lost.
• Dimming not working correctly:
  • Verify that the lighting device is compatible with brightness dimming.
  • Ensure the panel is properly paired with the correct zone (for PUSH3-2).
• Interferenz:
  • While designed for strong anti-interference, excessive 2.4GHz activity in the area might affect performance. Try to minimize other 2.4GHz devices if issues persist.

6. Spezifikationen

6.1 Dimensions and Packaging

7. Garantie und Support

This MIBOXER PUSH Wireless Brightness Dimming Panel comes with a 2 Jahr Garantie ab Kaufdatum. Bitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer's customer service. Contact information can typically be found on the product packaging or the manufacturer's official webWebsite.

8. Benutzertipps

Aus den bereitgestellten Informationen waren keine spezifischen Benutzertipps verfügbar.views oder Q&A-Inhalte.