DOMRAEM ESP32 WLED Digital Music Controller User Manual

1. Produktüberschreitungview

The DOMRAEM ESP32 WLED Digital Music Controller (DOM-WLE-AM) is an advanced, open-source based controller designed for smart LED strip lighting. It features a built-in microphone for music synchronization, supports a wide range of addressable LED chips, and offers versatile control options via a mobile app, voice assistants like Alexa, and integration with smart home platforms like MQTT and Home Assistant.

Hauptmerkmale:

• Breites Volumentage Input & High Power Output: Supports 5-24V DC input with 12A per channel and 16A total output capacity. Includes a USB-C 5V/5A direct power supply interface.
• Smart WiFi Connectivity & Open-Source Control: Utilizes ESP32 WLED wireless control technology, allowing direct WiFi connection and easy management via the WLED app. Open-source code supports developer customization and continuous upgrades.
• Sound-Activated & Music Sync: Built-in microphone enables sound-reactive lighting effects that automatically synchronize with music rhythm.
• Multi-Smart Control: Compatible with mainstream voice assistants (Alexa/Google Assistant) and supports dual control modes: remote (sold separately) and mobile app.
• 100+ Lighting Effects: Features a built-in professional-grade lighting effects library, fully supporting DIMMER/RGB/RGBW/RGBCCT light strips for personalized lighting scenes.
• Energy-Efficient Eco-Design: Standby power consumption of approximately 0.5W, ensuring long-term stable operation.
• Extensive Hardware Compatibility: Compatible with mainstream LED chips including WS2811, SK6812, WS2812B, WS2813, WS2814, WS2815, TM1814, and WS2805.

Produkt-Highlights:

• Industrial-grade circuit protection design.
• Professional open-source lighting control system.
• One-touch smart scene switching.
• Minimalist aesthetic exterior design.

2. Packungsinhalt

Bitte prüfen Sie das Paket auf folgende Artikel:

• 1x DOMRAEM ESP32 WLED Digital Music Controller (DOM-WLE-AM)

Note: LED strips, power supply, and remote control are sold separately and are not included in this package.

3. Spezifikationen

4. Installationsanleitung

4.1 Powering the Controller

The DOMRAEM WLED controller offers flexible power options:

• Gleichstromeingang 5-24V: Connect a compatible DC power supply to the 'INPUT DC5V-24V' terminal. Ensure the voltage entspricht Ihren Anforderungen an LED-Streifen.
• USB-C 5V/5A Eingang: For 5V LED strips, you can use a USB-C power adapter connected to the 'INPUT USB-C DC5V/5A' port. Do not exceed 5A when using USB-C.
• V+, V- Stromschnittstelle: An additional V+, V- power interface is available for direct power connection.

4.2 Verdrahtung von LED-Streifen

The controller features quick connect port design for convenient wiring. Follow these steps:

1. Öffnen Sie den Stecker: Den Stecker vorsichtig nach oben öffnen.
2. Draht einführen: Insert the stripped wire into the appropriate terminal.
3. Niederdrücken: Drücken Sie den Stecker nach unten, um das Kabel zu sichern.

Verkabelungsanleitungen:

• The group of D for GPIO16 is the default output. Please use this group first.
• The other group of D is GPIO2, which can be used after configuration on the APP.
• Ensure correct polarity: V=VCC, D=DATA, G=GND.

4.3 App-Installation

The WLED app is essential for controlling your LED strips. Download it using the following methods:

• iOS: Suchen nach "WLED" or "WLED Native" in the Apple App Store.
• Android: Download aus dem offiziellen GitHub-Repository: github.com/Aircoookie/WLED-App/releases

4.4 Initial App Configuration (WiFi Setup)

Follow these steps to connect your controller to your WiFi network and the WLED app:

1. Schritt Eins: Power on the WLED controller. Open the phone settings and connect to the WLED-AP WiFi network (password: wled1234).
2. Schritt zwei: After successful connection, it will automatically redirect to the WLED page. If not, open a browser and enter the WLED page. Click on "WIFI SETTINGS".
3. Schritt drei: Click "Scan" to display the account. NOTIZ: Be sure to choose a 2.4GHz WiFi network, otherwise it will not work.
4. Schritt vier: Geben Sie das Passwort ein und klicken Sie anschließend oben auf dem Bildschirm auf „Speichern“.
5. Schritt fünf: Verbinden Sie Ihr Telefon und den WLED-Controller mit demselben WLAN.
6. Schritt Sechs: Rufen Sie die WLED-Seite für die Konfiguration auf.
7. Schritt Sieben: Klicken Sie auf „Leerer Bereich“, um zur WLED-Seite zu gelangen.
8. Schritt Acht: After successful application, open WLED app.

5. Bedienungsanleitung

5.1 Basic App Control (Colors and Effects)

Once connected to the WLED app, you can easily control your LED strips:

• Farben: Use the color wheel to select static colors or choose from predefined color palettes.
• Auswirkungen: Browse through over 100 dynamic effects. Adjust speed, intensity, and other parameters for each effect.
• Segmente: Divide your LED strip into multiple sections and apply unique colors and effects to each segment independently.

5.2 Musikmodus

The built-in sensitive microphone allows the ESP32 WLED controller to follow music dynamic mode. After resetting, the microphone parameters need to be configured for the first time, and the device needs to be restarted.

Konfigurationsinformationen:

1. Mikrofontyp: Generisches I2S
2. I2S SD-Pin: 26
3. I2S WS Pin: 5
4. I2S SCK Pin: 21

5.3 Integration von Sprachassistenten (Alexa)

To connect your WLED controller with Alexa, follow these steps:

1. Gehen Sie zur Steuerungsseite des WLED-Controllers, klicken Sie oben rechts auf die Schaltfläche „Konfiguration“, um die Einstellungen aufzurufen, und klicken Sie dann auf „Schnittstellen synchronisieren“.
2. Scrollen Sie nach oben, um „Alexa Sprachassistent“ zu finden, aktivieren Sie das Kontrollkästchen neben „Alexa-Gerät emulieren“ und speichern Sie anschließend.
3. Nach erfolgreichem Speichern muss der WLED-Controller einmal aus- und wieder eingeschaltet werden.
4. Open "Amazon Alexa" app, click on the "Devices" page at the top right corner on the "+" Sign, and then click "Add Device".
5. Scrollen Sie anschließend nach oben und klicken Sie auf „Andere“, wählen Sie „Wi-Fi“ aus und klicken Sie dann auf „Geräte suchen“, um nach Lampen zu suchen.

5.4 Tastenfunktionen

The controller has two buttons: Reset and Opt.

• Reset-Taste: Durch Drücken dieser Taste wird das Controllermodul ausgeschaltet, wodurch der WLED-Controller unbrauchbar wird.asing the button will power the module back on, then you can use WLED controller normally. This button is useful for powering the controller on and off when it's inconvenient.
• Opt-Schaltfläche:
  1. Kurz drücken: Ein-/Ausschalten.
  2. 1 Sekunde lang gedrückt halten: Farben wechseln.
  3. Long press for more than 10 seconds: The WLED device will be reset to factory settings and the WLED-AP hotspot will be activated. Do not use unless it is an emergency! If the factory settings have been restored, please refer to the instruction manual to configure the device correctly.

5.5 Relaiskonfiguration

The controller supports relay configuration. When the power is turned off, there is no current passing through the LED strip, thus reducing power consumption. This can be configured within the WLED app settings.

5.6 WLED Remote Control (Optional)

The controller supports WLED remote control for long transmission distance and stable signal. Please note that the WLED remote control is sold separately and is not included with the controller.

5.7 Supported LED Strip Types

The controller supports most addressable LED strip types, including:

• WS2811
• WS2812
• WS2814
• WS2815
• SK6812
• SM16703
• SM16703P3
• FL1903B

5.8 Produktdemonstrationsvideo

6. Wartung

To ensure the longevity and optimal performance of your DOMRAEM WLED Digital Music Controller, please follow these maintenance guidelines:

• Reinigung: Use a soft, dry cloth to clean the exterior of the controller. Avoid using liquid cleaners or solvents, as they may damage the device.
• Umfeld: Operate the controller within the specified operating temperature range of -20 to 45°C. Avoid exposing it to extreme temperatures, high humidity, or direct sunlight.
• Verbindungen: Überprüfen Sie regelmäßig alle Kabelverbindungen auf festen Sitz und Korrosionsfreiheit. Lose Verbindungen können zu Funktionsstörungen oder Schäden führen.
• Lagerung: If storing the controller for an extended period, disconnect it from power and store it in a cool, dry place.

7. Fehlerbehebung

If you encounter issues with your DOMRAEM WLED Digital Music Controller, refer to the following troubleshooting tips:

7.1 LEDs Not Responding After Reset/Update

Important: After any reset or OTA update, you MUST configure GPIO12, then briefly press Reset or power cycle the controller. Refer to the manual for detailed configuration.

• Check GPIO12 Configuration: Ensure GPIO12 is correctly configured in the WLED app settings. If abnormal, reconfigure and reboot the controller.
• Netzteil prüfen: If GPIO12 configuration is normal, check the power supply circuit for any issues. Ensure the power supply is providing the correct voltage and sufficient current for your LED strips.

7.2 Connectivity Issues (WiFi)

• Verify WiFi Network: Ensure your phone and the WLED controller are connected to the same 2.4GHz WiFi network. The controller does not support 5GHz networks.
• Passwort prüfen: Double-check that the WiFi password entered during setup is correct.
• Restart Router/Controller: Try restarting your WiFi router and the WLED controller.
• Zurücksetzen auf Werkseinstellungen: If all else fails, perform a factory reset by long-pressing the 'Opt' button for more than 10 seconds. Then, repeat the initial app configuration steps.

7.3 Microphone Not Responding

• Anfangskonfiguration: After resetting the device, the microphone parameters (I2S SD pin, WS pin, SCK pin) must be configured in the WLED app settings. Refer to section 5.2.
• Gerät neu starten: After configuring microphone parameters, restart the controller for changes to take effect.

8. Benutzertipps

• For optimal performance, ensure your power supply is adequately rated for the length and density of your LED strips.
• Experiment with different effects and segments in the WLED app to discover unique lighting combinations.
• Prüfen Sie regelmäßig, ob WLED-Firmware-Updates verfügbar sind, um auf neue Funktionen und Verbesserungen zugreifen zu können.
• When using voice control, ensure clear pronunciation and that your voice assistant is properly linked to the WLED controller.

9. Garantie und Support

The DOMRAEM ESP32 WLED Digital Music Controller comes with a 2 Jahr Garantie Die Garantie deckt Herstellungsfehler ab Kaufdatum ab. Bitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or visit the official DOMRAEM support webWebsite.

10. Sicherheitshinweise

• Stellen Sie stets sicher, dass die Eingangslautstärketage (DC 5-24V) matches the requirements of your LED strips and power supply. Exceeding the maximum voltage or current can damage the controller and LED strips.
• When using the USB-C input, ensure the power supply does not exceed 5V/5A.
• Ensure all wiring is correctly connected with proper polarity (VCC, Data, GND) to prevent damage.
• Do not expose the controller to water, moisture, or extreme temperatures.
• Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf.
• Do not attempt to open or modify the controller, as this will void the warranty and may pose a safety risk.