DARK SKY 10303

MJX Hyper GO WRC C3 10303 4WD Brushless RC Rally Racing Car

Bedienungsanleitung

1. Einleitung

Vielen Dank für Ihren Einkauf.asing the MJX Hyper GO WRC C3 10303 4WD Brushless RC Rally Racing Car. This 1:10 scale electric remote control model car is designed for enthusiasts aged 14 and above, offering high performance and durability. This manual provides essential information for the safe and effective setup, operation, and maintenance of your new RC car.

MJX Hyper GO 10303 RC Rally Car
The MJX Hyper GO 10303, an officially licensed C3 WRC 1:10 scale model.

2. Sicherheitshinweise

WARNUNG: Dieses Produkt kann Sie Chemikalien wie Phthalaten (DEHP) aussetzen, von denen bekannt ist, dass sie im US-Bundesstaat Kalifornien Krebs und Geburtsfehler oder andere reproduktionsschädigende Wirkungen verursachen. Weitere Informationen finden Sie unter [Link einfügen]. www.P65Warnings.ca.gov.

  • Das RC-Auto darf nur auf offenen Flächen und fernab von Menschen, Haustieren und Hindernissen betrieben werden.
  • Betrieb nicht in der Nähe von öffentlichen Straßen oder in belebten Gegenden.
  • Halten Sie Hände, Haare und lose Kleidung von beweglichen Teilen fern.
  • Ensure batteries are charged safely and correctly.
  • Für Benutzer unter 18 Jahren wird die Aufsicht durch Erwachsene empfohlen.
  • Do not modify the product, as this may lead to malfunction or injury.

3. Packungsinhalt

Das Standardpaket umfasst folgende Artikel:

  • MJX Hyper GO WRC C3 10303 RC Rally Racing Car
  • Fernbedienung (Sender)
  • Bedienungsanleitung
  • Originalverpackung

Notiz: The 'without Battery' version (SKU 12000051797411812) does not include a battery or charger. The 'with Battery' version (SKU 12000051797411811) includes a 2S 5000mAh battery and charger.

RC Car with Battery and Charger, and Remote Controller
Example of included components for the 'with Battery' version, including the remote controller.

4. Spezifikationen

BesonderheitBeschreibung
Modellnummer10303
MarkennameDARK SKY (MJX Hyper GO)
TypRC Car, Rally Racing
Skala1:10
LeistungstypBürstenloser Elektromotor
Motor3652 Sensored Brushless Motor 3200 KV
ESC80A Sensored Brushless ESC (with Bluetooth APP parameter adjustment)
Servo6kg Standard Servo
EmpfängerR3B 3CH Receiver
KreiselG3C Gyro
MaterialMetal, Plastic, Rubber (PC Material body)
Chassis7075 Aluminum Alloy Chassis
StoßdämpferMetal Oil Filled Shocks
Stand der VersammlungSofort einsatzbereit
FernbedienungYes, MODE2 Controller Mode
Empfohlenes Alter14+ Jahre
Abmessungen des BatteriefachsApprox. 13.8cm (length) x 4.5cm (width)
Empfohlene BatterieAngry Snail 2S 5000mAh Battery (or similar 2S LiPo)
ReifendimensionenApprox. 2.5cm (width), 25.7cm (diameter)
BodenfreiheitCa. 2.5cm
Hochgefährliche ChemikalieKeiner
Key Electronic Components of the RC Car
Key electronic components: 80A Sensored Brushless ESC, 6kg Standard Servo, G3C Gyro, R3B 3CH Receiver, 3652 Sensored Brushless Motor 3200 KV.

5. Einrichtung

5.1 Einlegen der Batterie

  1. Ensure the RC car and remote controller are turned OFF.
  2. Locate the battery compartment on the chassis. Refer to the image below for dimensions.
  3. If your package did not include a battery, acquire a compatible 2S LiPo battery (e.g., Angry Snail 2S 5000mAh) that fits within the 13.8cm x 4.5cm compartment.
  4. Carefully insert the charged battery into the compartment.
  5. Connect the battery to the ESC (Electronic Speed Controller) using the appropriate connector.
  6. Befestigen Sie die Batteriefachabdeckung.
Battery Compartment Dimensions and Recommended Battery
Battery compartment dimensions (13.8cm x 4.5cm) and recommended Angry Snail 2S 5000mAh battery.

5.2 Einrichtung der Fernbedienung

  1. Install 4x AA batteries (not included) into the remote controller.
  2. Machen Sie sich mit den Bedienelementen vertraut:
    • ST.REV: Lenkung rückwärts
    • ST.TRIM: Lenktrimmung
    • ST.D/R: Lenkung Dual Rate
    • TH.D/R: Dual Rate drosseln
    • TH.REV: Gasrückseite
    • CH1: ST: Steering Channel
    • CH2: TH: Drosselkanal
    • STROMSCHALTER: Ein/Aus-Schalter
    • LEDs: Betriebsanzeige
  3. Turn on the remote controller first, then the RC car.
Remote Controller Layout and Functions
Detaillierte view der Fernbedienung mit beschrifteten Funktionen.

5.3 Tire Selection

Your RC car comes with two sets of tires, suitable for different terrains. Choose the appropriate set for your driving environment.

Two Sets of Tires and Car Dimensions
The RC car includes two sets of tires. Also shown are the car's ground clearance (2.5cm) and overall height (25.7cm).

6. Bedienungsanleitung

6.1 Grundlegende Bedienung

  1. Stellen Sie das RC-Auto auf eine ebene Fläche.
  2. Turn on the remote controller, then the RC car.
  3. Use the steering wheel on the remote controller to turn left and right (CH1: ST).
  4. Use the trigger to control forward and reverse throttle (CH2: TH). Pull for forward, push for reverse/brake.
  5. Adjust ST.TRIM to ensure the car drives straight when the steering wheel is centered.
  6. Adjust ST.D/R and TH.D/R to limit steering angle and throttle response for easier control, especially for beginners.

6.2 Advanced ESC Features

The 80A Sensored Brushless ESC features a built-in powerful BEC with a maximum 13A output, capable of driving various servos and peripheral electrical equipment. It also supports Bluetooth APP connectivity for advanced parameter adjustments and real-time monitoring.

  • Bluetooth-APP: Download the dedicated app to your smartphone.
  • Parameteranpassung: Adjust settings such as Drag Brake, Neutral Range, and more via the app.
  • Echtzeitüberwachung: Batterievol überwachentage, motor temperature, and ESC temperature directly from your phone.
80A Sensored Brushless ESC with Bluetooth App Monitoring
The 80A Sensored Brushless ESC offers high efficiency, power saving, low noise, fast deceleration, and braking. It supports Bluetooth APP for parameter adjustment and real-time monitoring of battery voltage, motor, and ESC temperature.

7. Wartung

Regelmäßige Wartung gewährleistet die Langlebigkeit und optimale Leistung Ihres RC-Autos.

  • Reinigung: After each use, especially in dusty or wet conditions, clean the car thoroughly. Use a soft brush or compressed air to remove dirt and debris. Avoid using water directly on electronic components.
  • Chassis and Drivetrain: Regularly inspect the 7075 Aluminum Alloy Chassis, Metal Drive Shaft, Metal CVDs, Powder Metallurgy Gears, and Rear Differential Chrome Steel Gear for any signs of wear, damage, or loose connections. Tighten screws as needed.
  • Schocks: Check the Metal Oil Filled Shocks for leaks or damage. Ensure they operate smoothly.
  • Lager: Inspect bearings for smooth rotation. Replace any worn or seized bearings.
  • Reifen: Check tires for wear and tear. Ensure they are securely mounted.
  • Elektronik: Keep all electronic components (ESC, motor, receiver, servo, gyro) clean and dry. Ensure all wires are securely connected.
Metal Parts for the Whole Car
Überview of the durable metal components: Metal Drive Shaft, 7075 Aluminum Alloy Chassis, Metal CVD, Powder Metallurgy Gear, Rear differential chrome steel gear, 7075 Aluminum Alloy suspension parts, Metal Oil Filled Shocks, and Bearings.
7075 Aluminum Alloy Chassis and Drivetrain Diagram
Detaillierte view of the 7075 Aluminum Alloy Chassis and the 4WD drivetrain components.

8. Fehlerbehebung

ProblemMögliche UrsacheLösung
Auto reagiert nichtLow battery in car or remote; Car/remote not turned on; Loose connections; Binding issue.Charge/replace batteries. Turn on both devices. Check all wire connections. Re-bind remote to car (refer to remote manual for binding procedure).
Car drives slowly or lacks powerLow battery in car; Motor/ESC overheating; Obstruction in drivetrain.Charge car battery. Allow motor/ESC to cool down. Check for debris in gears or axles.
Steering is erratic or unresponsiveSteering trim incorrect; Servo arm loose; Damaged servo; Low battery in remote.Adjust ST.TRIM. Check servo arm for tightness. Inspect servo for damage. Replace remote batteries.
Car pulls to one sideSteering trim incorrect; Uneven tire pressure/wear; Suspension issue.Adjust ST.TRIM. Check tires. Inspect suspension components for damage or misalignment.
Motor/ESC gets very hotOvergearing; Continuous heavy load; Insufficient cooling.Consider smaller pinion gear. Avoid prolonged high-stress operation. Ensure cooling fan (if present) is clear. Monitor temperature via app.

9. Benutzertipps

  • Batteriepflege: Always store LiPo batteries in a safe, fireproof location and at storage voltage. Never overcharge or over-discharge them.
  • ESC App: Utilize the Bluetooth APP feature of the 80A Sensored Brushless ESC to fine-tune your car's performance and monitor its health. This can significantly improve your driving experience and prevent damage.
  • Tire Matching: Experiment with both sets of included tires to find the best grip and handling characteristics for different surfaces (e.g., asphalt, dirt, gravel).
  • Vorlaufprüfung: Before each run, quickly check all screws, especially on the chassis and suspension, to ensure they are tight. A loose screw can lead to unexpected part failure.
  • Reinigung nach dem Lauf: A quick clean after each session, especially removing debris from the drivetrain, will prevent premature wear and keep your car running smoothly.

10. Garantie und Support

For any issues or questions regarding your MJX Hyper GO WRC C3 10303 RC Rally Racing Car, please contact the seller or manufacturer directly. Provide your model number (10303) and a detailed description of the issue for efficient support.

Zugehörige Dokumente - 10303

Vorview DarkSky Approved Luminaire: LED Linear GmbH FUSION IP67
DarkSky approval certificate for the LED Linear GmbH FUSION IP67 commercial luminaire, highlighting its contribution to protecting dark skies and preserving the nighttime environment.
Vorview Hyper Go 1:14 RC Hochgeschwindigkeitsauto – Benutzerhandbuch
Benutzerhandbuch für das Hyper Go 1:14 RC-Hochgeschwindigkeitsauto, einschließlich Einrichtung, Bedienung, Sicherheitsvorkehrungen und technischen Spezifikationen.
Vorview Bedienungsanleitung Carrello Cascata CRL-10303/1
Szczegółowa instrukcja obsługi dla krzesełka Carrello Cascata CRL-10303/1. Informieren Sie sich über die Wartung, Reparatur, Montage und Funktionsweise des Produkts.
Vorview LIGHTAILING LGK531 LED Lighting Kit Installation Guide for LEGO Icons Loop Coaster 10303
Comprehensive step-by-step instructions for installing the LIGHTAILING LGK531 LED lighting kit onto the LEGO Icons Loop Coaster 10303 set. Enhance your model with detailed guidance.
Vorview DIGITUS USB-GaN-Ladegerät 67W (DA-10303) – Kurzanleitung
Kurzanleitung zur Installation des DIGITUS USB-GaN-Ladegeräts (67 W) mit je einem USB-C- und USB-A-Anschluss. Detaillierte Spezifikationen, Informationen zur Stromverteilung und Sicherheitshinweise für das Modell DA-10303.
Vorview Lightailing Angel 43257 (LGK769) LED Lighting Kit Installation Guide
Step-by-step instructions and guide for installing the Lightailing LED lighting kit for the Angel 43257 building block model (Item No. LGK769).