1. Wichtige Sicherheitshinweise
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warnung: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Verwenden Sie dieses Produkt nicht für andere als die vorgesehenen Zwecke.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture (for electrical products).
- Handle with care to avoid cuts or injuries (for sharp/dangerous items).
2. Packungsinhalt
Your VGR Professional Grooming Kit includes the following items:
- 1 x Hair Clipper (V-003)
- 1 x Hair Trimmer (V-906)
- 1 x Hair Shaver (V-308)
- 6 x Guide Combs for Hair Clipper (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm)
- 3 x Guide Combs for Hair Trimmer (1mm, 2mm, 3mm)
- 1 x USB-Ladekabel
- 1 x Reinigungsbürste
- 1 x Oil (Note: Due to airline regulations, lubricants may not be included in some packages.)
- 1 x Protection Cap (for shaver)
- 1 x Travel Pouch (for shaver)
- 1 x Benutzerhandbuch (dieses Dokument)
Video: Unboxing und mehrview of the V-003 Hair Clipper, showing package contents and basic features.

Image: The VGR Professional Hair Trimmer, Clipper, and Shaver set.
3. Einrichten und Laden
3.1 Ersteinrichtung
- Auspacken: Carefully remove all protective films and packaging materials from the devices.
- Überprüfen: Check each device and accessory for any signs of damage. Do not use if damaged.
3.2 Ladeanweisungen
Before first use, fully charge each device. Use the provided USB cable and connect it to a certified 5V power adapter (not included).
- V-003 Hair Clipper: Approximately 3 hours for a full charge, providing up to 250 minutes of work time.
- V-906 Hair Trimmer: Approximately 2.5 hours for a full charge, providing up to 240 minutes of work time.
- V-308 Hair Shaver: Approximately 2 hours for a full charge, providing up to 150 minutes of work time.

Image: V-003 Hair Clipper showing 3 hours charge time and 250 minutes work time.

Image: V-308 Hair Shaver showing 2 hours charge time and 150 minutes work time.
4. Bedienungsanleitung
4.1 Allgemeine Bedienung
- Ein-/Ausschalten: Halten Sie die Einschalttaste 3 Sekunden lang gedrückt, um das Gerät ein- oder auszuschalten.
- Change Modes/Speeds: For devices with multiple modes or speeds, short press the power button to cycle through the available settings.
- LED-Anzeige: Monitor battery status, motor RPM, and charging indication on the integrated LED display.
4.2 V-003 Hair Clipper
- Einstellbarer Kegelhebel: Use the side taper lever to micro-adjust the cutting length from 0.5mm to 2.5mm for seamless fades and precise detailing.
- Anbringen der Führungskämme: Select the desired guide comb (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm) and securely attach it to the blade.
- Motor: Features a dual-speed motor with up to 9000 RPM for efficient cutting of all hair types.

Image: V-003 Hair Clipper showing guide comb adjustment and on/off switch with Turbo function.

Image: V-003 Hair Clipper demonstrating 0.5-2.5mm adjustment and various guide comb sizes.
4.3 V-906 Hair Trimmer
- Führungskämme: Use the 1mm, 2mm, or 3mm guide combs for precise trimming and detailing.
- Motor: Equipped with a 9000 RPM motor for powerful and accurate trimming.
- Klingen: Features advanced DLC-coated blades for lasting sharpness and reduced friction.

Image: V-906 Hair Trimmer showing 1mm, 2mm, 3mm guide combs and its metal housing.
4.4 V-308 Hair Shaver
- 3-Speed Adjustable Motor: Customize your shave with three precision speed settings (7000-9000 RPM) for sensitive skin or dense beard areas.
- Dual Black Titanium Foil System: Provides a smooth and irritation-free shave with ultra-thin foils.
- Ergonomisches Design: The contoured, anti-slip grip ensures comfortable and controlled shaving.

Image: V-308 Hair Shaver highlighting double black titanium foils and LED display.

Image: V-308 Hair Shaver's LED display showing motor speed, battery state, and charging indicator.
5. Wartung
5.1 Reinigung
Regelmäßige Reinigung gewährleistet optimale Leistung und Hygiene.
- Nach jedem Gebrauch: Turn off the device. Remove any attached guide combs.
- Bürstenreinigung: Use the provided cleaning brush to remove loose hairs from the blades and the device body.
- Shaver Cleaning: For the V-308 shaver, the foil head can be easily detached for thorough cleaning.

Image: V-308 Hair Shaver demonstrating easy cleaning by detaching the foil head.
5.2 Schmierung
Apply a small drop of lubricating oil to the blades after every few uses to maintain smooth operation and prolong blade life. (Note: Due to airline regulations, lubricants may not be included in some packages. If not included, use a suitable clipper oil.)
6. Fehlerbehebung
If you encounter any issues with your VGR grooming device, please refer to the following common solutions:
- Gerät lässt sich nicht einschalten: Stellen Sie sicher, dass das Gerät vollständig aufgeladen ist. Ist der Akku schwach, schließen Sie es an das Ladegerät an.
- Schlechte Schneidleistung: Clean the blades thoroughly to remove any hair buildup. Lubricate the blades. Ensure the correct guide comb is attached securely.
- Überhitzung des Gerätes: Stop using the device and allow it to cool down. Ensure proper ventilation during use.
- Ungewöhnliches Geräusch: Clean and lubricate the blades. If the noise persists, contact customer support.
7. Spezifikationen
| Besonderheit | V-003 Hair Clipper | V-906 Haarschneider | V-308 Hair Shaver |
|---|---|---|---|
| Marke | VGR | ||
| Klingenmaterial | Hybrid Ceramic & Powder Metallurgy / DLC Coating | Ceramic / DLC Coating | Dual Black Titanium Foil |
| Motortyp | ROTIEREND | ||
| Motordrehzahl | Up to 9000 RPM (Dual-Speed) | 9000 U/min | 7000-9000 RPM (3-Speed Adjustable) |
| Akku-Typ | 2500 mAh Lithium-Ionen-Akku | 2000 mAh Lithium-Ionen-Akku | 1200 mAh Lithium-Ionen-Akku |
| Ladezeit | 3 Stunden | 2.5 Stunden | 2 Stunden |
| Arbeitszeit | 250 Minuten | 240 Minuten | 150 Minuten |
| Leistungstyp | Mains and battery operation (Cordless) | ||
| Ladeschnittstelle | USB (5V-1A Input) | ||
| Schnittlängeneinstellung | 0.5-2.5mm Taper Lever + Guide Combs | Guide Combs (1mm, 2mm, 3mm) | N/A (Foil Shaver) |
| Gehäusematerial | Metall | ||
| Bandtage | <20 V | ||
| Zertifizierung | 3C, CE, UL, GS, CCC | ||
8. Benutzertipps
- Understand Your Tools: Each device in this VGR set (Clipper, Trimmer, Shaver) is designed for specific grooming tasks. Familiarize yourself with their unique features and recommended uses to achieve the best results.
- Start with Longer Settings: When cutting hair, always start with a longer guide comb and gradually reduce the length until you achieve your desired style. This helps prevent accidental over-cutting.
- Regelmäßig reinigen: Consistent cleaning after each use is crucial for maintaining the sharpness of the blades and the longevity of your devices.
- Vollständig aufladen: For optimal performance and battery life, ensure your devices are fully charged before each grooming session.
9. Garantie und Support
All VGR products come with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For warranty claims, technical support, or any questions regarding your VGR grooming devices, please contact the seller or manufacturer directly. Ensure you retain your proof of purchase for warranty validation.
Hersteller: Ningbo Woji Electric Appliance Co., Ltd., CN-CN-No. 656, Kaifa East Road, Zhouxiang Town, Cixi City, Ningbo, Zhejiang.
Bevollmächtigter EU-Vertreter: Jorge Wilsone, CASTELLANA 9144, 28046 Madrid.





