WSDCAM Motorcycle TPMS Tire Pressure Monitor

1. Einleitung

Thank you for choosing the WSDCAM Motorcycle TPMS (Tire Pressure Monitoring System). This device is designed to enhance your riding safety by providing real-time monitoring of your motorcycle's tire pressure and temperature. With its advanced features and robust design, you can ride with greater confidence and peace of mind.

2. Hauptmerkmale

• Echtzeitüberwachung: Displays motorcycle tire data, including temperature and pressure, in real-time.
• 7 Alarmmodi: Includes high-pressure, low-pressure, high-temperature, fast air leakage, sensor data loss, sensor low battery, and receiver low power alarms.
• Advanced Smart Chip: Quickly and effectively senses tire conditions, providing accurate and timely alerts for abnormal tire pressure. Strong, interference-free signal for higher stability.
• Automatische Operation: The vibrator automatically enters working state when driving. The monitor automatically enters dormant and standby state when the motorcycle stops for a static period.
• Intelligent Charging Design: Features magnetic charging for quick and convenient power replenishment. The magnetic design is also waterproof and dustproof.
• IP67 Wasserdicht: Designed to withstand rain, mud, and dust, ensuring reliable performance in various riding conditions.

3. Packungsinhalt

Bitte überprüfen Sie das Paket, um sicherzustellen, dass alle Artikel vorhanden sind:

• TPMS Monitor Unit
• Front Wheel Sensor (A.F.W)
• Rear Wheel Sensor (B.R.W)
• Schlüssel
• USB-Netzkabel
• Theft-proof Nuts (2x)
• Mounting Bracket (pre-attached to monitor)

4. Einrichtung und Installation

4.1 Aufladen des Monitors

Before first use, fully charge the TPMS monitor. The unit supports both solar power charging and magnetic USB charging.

• Solarladung: Place the monitor in direct sunlight to utilize its integrated solar panel.
• Magnetische USB-Aufladung: Connect the provided USB power cord to the magnetic charging port on the monitor and a USB power source. The magnetic design ensures a secure, waterproof, and dustproof connection.

4.2 Installing the Monitor

The monitor comes with a mounting bracket suitable for motorcycle handlebars.

1. Befestigen Sie die Montagehalterung sicher am Lenker Ihres Motorrads.
2. Slide the TPMS monitor onto the bracket until it clicks into place.
3. Passen Sie die viewing angle for optimal visibility while riding.

4.3 Installing the Sensors

The sensors are labeled 'A.F.W' (Front Wheel) and 'B.R.W' (Rear Wheel). Ensure you install them on the correct tires.

1. Schrauben Sie die Ventilkappe von Ihrem Reifen ab.
2. Screw on one of the theft-proof nuts onto the valve stem.
3. Screw the corresponding sensor (A.F.W for front, B.R.W for rear) onto the valve stem until it is hand-tight.
4. Using the provided spanner, tighten the theft-proof nut against the sensor to secure it and prevent theft.
5. Repeat for the other tire.

5. Bedienungsanleitung

5.1 Power On/Off and Automatic Operation

• The monitor will automatically power on and enter working state when it detects vibration (e.g., when you start riding).
• When the motorcycle stops and remains static for approximately ten minutes, the monitor will automatically enter a dormant (sleep) and standby state to conserve power.

5.2 Das Display verstehen

The LCD color screen provides clear, real-time information about your tires.

5.3 Alarmmodi

The TPMS is equipped with a 7-alarm guardian system to alert you to potential issues:

• Hochdruckalarm: Alerts when tire pressure exceeds a preset safe limit.
• Niederdruckalarm: Alerts when tire pressure drops below a preset safe limit.
• Hochtemperaturalarm: Alerts when tire temperature exceeds a preset safe limit.
• Fast Tire Leak Alarm: Erkennt und alarmiert bei schnellem Rückgangasing Reifendruck.
• Alarm bei Sensordatenverlust: Zeigt an, dass ein Sensor keine Daten überträgt.
• Alarm bei niedrigem Batteriestand des Sensors: Alerts when a tire sensor's battery is low.
• Receiver Low Power Alarm: Alerts when the main monitor unit's battery is low.

Upon an alarm, the monitor will typically emit an audible warning and display the specific alarm icon or message on the screen. Address any alarms promptly for your safety.

6. Wartung

6.1 Reinigung

Wischen Sie Monitor und Sensoren mit einem weichen, fusselfreien Tuch ab.amp cloth. Do not use harsh chemicals or abrasive cleaners. The IP67 rating ensures the device is waterproof and dustproof, but avoid submerging it for extended periods or using high-pressure water jets directly on the charging port or sensors.

6.2 Batteriepflege

• Regularly check the monitor's power display and recharge as needed using solar power or the magnetic USB cable.
• If a 'Sensor Low Battery' alarm occurs, replace the battery in the affected sensor immediately. Refer to the sensor's specific instructions for battery replacement.

7. Fehlerbehebung

8. Spezifikationen

9. Benutzertipps

• For optimal solar charging, ensure the monitor's solar panel is exposed to direct sunlight whenever possible, especially when parked.
• Always double-check tire pressure with a manual gauge periodically to confirm the accuracy of the TPMS readings.
• When installing sensors, ensure they are tightened sufficiently to prevent air leaks but do not overtighten, which could damage the valve stem.
• Familiarize yourself with the alarm sounds and display indicators so you can quickly identify and respond to any warnings while riding.

10. Garantie und Support

For warranty information, technical support, or service inquiries, please refer to the seller's contact information or the product listing page where you purchased this device. Keep your proof of purchase for warranty claims.