Einführung
This manual provides instructions for the installation, operation, and maintenance of your Westek 6603BC 3-Level Touch Control Lamp Socket Dimmer. This device converts any lamp mit einer Metallfassung in ein berührungsgesteuertes lamp, offering three levels of illumination.
Wichtig: This dimmer is designed for use with incandescent bulbs up to 150W. It is not compatible with CFL or non-dimmable LED bulbs. Dimmable LED bulbs may work, but performance can vary.
Sicherheitshinweise
- Trennen Sie immer den lamp from the wall outlet before installation or maintenance.
- Überschreiten Sie nicht dieamp wastage specified for your lamp fixture. The dimmer supports up to 150W incandescent bulbs.
- Stellen Sie sicher, dass die lamp has a metal socket for proper operation. This dimmer will not function with plastic sockets.
- Do not use this dimmer control with another dimmer in the same circuit.
- Operate within the specified temperature range: 32°F to 104°F (0°C to 40°C).
Produkt überview
The Westek 6603BC is a compact screw-in device that adds touch control dimming functionality to compatible lamps.
Abbildung 1: Vorderseite view of the Westek 6603BC Touch Control Lamp Socket Dimmer. The device is white with a brass screw-in base and a socket for a light bulb at the top.
Abbildung 2: Seite view of the Westek 6603BC Touch Control Lamp Socket Dimmer, showing its compact design.
Abbildung 3: Oben view of the dimmer's bulb socket, showing the internal contacts where the light bulb screws in.
Setup und Installation
Follow these steps to install your touch control dimmer:
- Bereiten Sie das L voramp: Stellen Sie sicher, dass Ihr lamp is unplugged from the wall outlet. Remove the lamp shade and the existing light bulb.
- Check Socket Material: Verify that your lamp hat eine metal socket. This dimmer will not work with plastic sockets.
- Dimmer einbauen: Screw the Westek 6603BC dimmer firmly into your lamp's metal socket.
- Glühbirne einbauen: Screw an ordinary one-way incandescent light bulb (up to 150W) into the dimmer's socket. Even if your lamp originally used a 3-way bulb, a standard one-way bulb is required for this dimmer.
- Strom anschließen: Stecken Sie denamp in eine Wandsteckdose.
- Aktivieren Sie Lamp: Wenn Ihr lamp has an existing switch, turn it to the "ON" position (or the second position for 3-way sockets) to allow the dimmer to function.
Video 1: A short demonstration of the Westek 6603BC dimmer in operation, showing how to touch a metal part of the lamp to cycle through light levels. This video is provided by AmerTac, the manufacturer.
Bedienungsanleitung
Once installed and powered, operate the dimmer by touching any metal portion of your lamp:
- Erste Berührung: Aktiviert die Nachtlicht level (low brightness).
- Zweite Berührung: Aktiviert die Medium level (normal room light brightness).
- Dritte Berührung: Aktiviert die Hoch level (full brightness for reading or maximum illumination).
- Vierte Berührung: Macht das lamp AUS.
The dimmer will cycle through these four states with each subsequent touch.
Wartung
The Westek 6603BC dimmer requires minimal maintenance. Ensure the device and lamp are unplugged before cleaning.
- Wipe the exterior of the dimmer with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Periodically check the electrical connections for any signs of wear or damage.
- Replace incandescent bulbs as needed, ensuring they do not exceed 150W.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Dimmer does not respond to touch. |
|
|
| Light flickers or does not dim properly. |
|
|
| Dimmer turns on randomly or behaves erratically. |
|
|
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | 6603 v.Chr. |
| Marke | Westek |
| Betriebsmodus | ON-OFF, 3-Level Dimming |
| Aktuelle Bewertung | 1.25 Amps |
| Betriebslautstärketage | 120 Volt |
| Kompatible Geräte | Glühlampen (bis zu 150 W) |
| Kontrollmethode | Berühren |
| Anzahl Positionen | 3 (Night Light, Medium, High) + OFF |
| Artikelabmessungen (L x B x H) | 2.75 x 1.75 x 1.75 Zoll |
| Artikelgewicht | 4 Unzen |
| Material | Metall (Kontaktmaterial) |
| Hersteller | AMERTAC-WESTEK |
| Betriebstemperatur | 32 °C bis 104 °C (0 °F bis 40 °F) |
Garantieinformationen
This product comes with a manufacturer's warranty. Please refer to the packaging or contact Westek customer service for specific warranty terms and conditions.
Kundenservice
For further assistance, technical support, or to inquire about replacement parts, please contact Westek customer service. Contact information can typically be found on the product packaging or the official Westek webWebsite.
