Einführung
The Dremel 575 Right Angle Attachment is designed to extend the functionality of your Dremel rotary tool, providing access to confined and hard-to-reach areas. This attachment allows for precise grinding, drilling, and cutting tasks in spaces where a standard rotary tool might be cumbersome. Its robust design ensures smooth and cool operation, making intricate work more manageable.
Im Lieferumfang enthaltene Komponenten
The Dremel 575 Right Angle Attachment package typically includes the following items:
- One (1) Dremel 575 Right Angle Attachment
- One (1) Drive Adapter (1/8" collet)
- One (1) Collet Lock
- One (1) Wrench
Kompatibilität
The Dremel 575 Right Angle Attachment is compatible with a wide range of Dremel corded and cordless rotary tool models. Ensure your tool is listed below for proper fit and function:
- Dremel 100
- Dremel 200
- Dremel 3000
- Dremel 4000
- Dremel 4300
- Dremel 8220
- Dremel 8240
- Dremel 8250
- Dremel 8260
Note: For Dremel 4200 compatibility, use the 4200 Attachment Adapter found in your Dremel 4200 kit.
Aufstellen
Follow these steps to properly attach the Dremel 575 Right Angle Attachment to your rotary tool and install accessories:
- Prepare the Rotary Tool: Ensure your Dremel rotary tool is unplugged or its battery is removed. Remove the housing cap from the front of your rotary tool.
- Install Drive Adapter: Insert the included drive adapter into the collet of your rotary tool. Tighten the collet using the provided wrench.
- Attach Right Angle Unit: Align the right angle attachment with the threaded collar of the rotary tool. Screw the attachment onto the tool until it is secure. The quick connect system allows for easy attachment without additional wrenches.
- Winkel einstellen (optional): The coupling system allows you to rotate the right angle attachment on the tool to achieve a perfect grip and optimal working angle. There are 12 adjustable directions. Loosen the collar slightly, rotate to the desired position, and then re-tighten the collar.
- Zubehör einsetzen: Insert your desired Dremel accessory (e.g., grinding stone, cutting wheel, drill bit) into the collet of the right angle attachment. Use the included collet lock and wrench to securely tighten the accessory. Do not use the main rotary tool's shaft lock button when tightening accessories on the attachment to prevent damage.
Bedienungsanleitung
Once the Dremel 575 Right Angle Attachment is securely installed and your desired accessory is in place, you can begin operation. The fixed 90° angled head provides stability and improved visibility to your workpiece.
- Einschalten: Turn on your Dremel rotary tool to the desired speed setting.
- Positionierung: Utilize the 90° angle to reach areas that are otherwise inaccessible with the straight rotary tool. The ability to rotate the attachment in 12 directions allows for optimal positioning for various tasks.
- Anwendung: Apply gentle, consistent pressure. Allow the tool and accessory to do the work. Avoid excessive force, which can lead to premature wear of the accessory or the attachment.
- Sichtweite: The angled head improves line of sight to the workpiece, enhancing precision for tasks like grinding, drilling, and cutting.
Wartung
The Dremel 575 Right Angle Attachment is designed for durability and smooth operation, featuring ball bearings and spiral bevel gears. Regular maintenance will ensure its longevity and optimal performance:
- Reinigung: After each use, disconnect the attachment from the rotary tool and clean any dust, debris, or residue from the exterior and internal mechanisms. Use a soft brush or compressed air to remove particles from the gear housing and collet area.
- Schmierung: The internal ball bearings and spiral bevel gears are designed for smooth and cool operation. No user lubrication is typically required. If you notice any unusual noise or resistance, consult Dremel customer support.
- Lagerung: Store the attachment in a clean, dry place, away from extreme temperatures and humidity.
Fehlerbehebung
If you encounter any issues with your Dremel 575 Right Angle Attachment, consider the following:
- Accessory Not Holding Securely: Ensure the collet and collet lock are properly installed and tightened using the provided wrench. Verify the accessory shank size matches the collet size (1/8" drive adapter included).
- Übermäßige Geräusche oder Vibrationen: Check that the attachment is securely fastened to the rotary tool and that the accessory is correctly installed and balanced. If the issue persists, discontinue use and contact Dremel customer support.
- Difficulty Changing Angle: Ensure the collar is sufficiently loosened before attempting to rotate the attachment. Do not force the rotation.
For further troubleshooting or issues not listed, refer to your main Dremel rotary tool's instruction manual or contact Dremel customer support.
Technische Daten
| Besonderheit | Spezifikation |
|---|---|
| Marke | Dremel |
| Modellnummer | 575 |
| Artikelgewicht | 4.9 Unzen |
| Produktabmessungen (L x B x H) | 2.78 x 1.7 x 6.58 Zoll |
| Material | Plastik |
| Maximale Drehzahl | 30,000 U/min |
| Besonderheit | Compact, Cordless (when used with compatible cordless tools) |
| Empfohlene Verwendung | Cutting, Grinding, Drilling in hard-to-reach areas |
Garantie und Support
The Dremel 575 Right Angle Attachment is backed by a 1 Jahr eingeschränkte Garantie. For warranty claims, technical assistance, or product support, please contact Dremel customer service through their official webWebsite oder den Händler, bei dem das Produkt gekauft wurde.
Always refer to the official Dremel webWebsite für die aktuellsten Garantieinformationen und Supportressourcen.
