Grant 201

Grant Modell 201 381mm Holzlenkrad Bedienungsanleitung

Model: 201 | Brand: Grant

1. Einleitung

Welcome to your new Grant Model 201 Wood Steering Wheel. This manual provides essential information for the proper installation, operation, and maintenance of your steering wheel. Please read it thoroughly before proceeding with installation or use.

The Grant Model 201 is a premium steering wheel designed for vehicle-specific fitment. It features a 38.1 cm (15-inch) diameter, a genuine hand-polished hardwood grip with a walnut finish, anodized aluminum rivets for a sporty look, and durable chrome-plated steel spokes.

Grant Model 201 Wood Steering Wheel with chrome spokes and a polished wooden rim.

Image 1.1: The Grant Model 201 Wood Steering Wheel, showcasing its polished hardwood rim and chrome-plated steel spokes.

2. Sicherheitshinweise

Always prioritize safety during installation and operation. Failure to follow these instructions may result in injury or damage to your vehicle.

3. Packungsinhalt

Bitte vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind.

Notiz: A vehicle-specific mounting kit (hub adapter) is required for installation and is sold separately. Ensure you have the correct kit for your vehicle's make, model, and year.

4. Einrichtung und Installation

The following steps provide a general guide for installing the Grant Model 201 steering wheel. Specific procedures may vary depending on your vehicle and the mounting kit used. Always refer to your vehicle's service manual and the instructions provided with your specific mounting kit.

  1. Fahrzeug vorbereiten: Park the vehicle on a level surface, engage the parking brake, and disconnect the negative terminal of the battery. Ensure the front wheels are straight.
  2. Originales Lenkrad ausbauen: Carefully follow your vehicle's service manual to remove the original steering wheel. This often involves removing the horn pad, disconnecting electrical connectors (including airbag if present), and unbolting the steering wheel from the steering column shaft.
  3. Install Mounting Hub Adapter: Install the vehicle-specific mounting hub adapter onto the steering column shaft according to the instructions provided with the adapter kit. Ensure it is properly aligned and secured.
  4. Connect Horn Wiring: Route the horn wiring through the steering wheel and connect it to the horn button assembly as per the instructions.
  5. Lenkrad anbringen: Position the Grant Model 201 steering wheel onto the mounting hub adapter, aligning the bolt holes. Secure the steering wheel to the hub using the provided fasteners. Tighten bolts evenly and to the specified torque.
  6. Install Horn Button: Install the horn button assembly into the center of the steering wheel.
  7. Letzte Kontrollen: Reconnect the negative battery terminal. Test the horn and ensure all steering functions operate correctly. Turn the steering wheel lock-to-lock to confirm no binding or interference.

5. Bedienung

The Grant Model 201 steering wheel is designed to function identically to your vehicle's original steering wheel once properly installed. It provides a comfortable and secure grip for vehicle control.

Always operate your vehicle safely and responsibly, adhering to all traffic laws.

6. Wartung

Proper care will ensure the longevity and appearance of your Grant Model 201 steering wheel.

7. Fehlerbehebung

If you encounter any issues with your Grant Model 201 steering wheel, refer to the following table for common problems and solutions.

ProblemMögliche UrsacheLösung
Steering wheel feels loose or has excessive play.Mounting bolts are not sufficiently tightened. Hub adapter not properly seated.Check and re-tighten all mounting bolts to specified torque. Ensure the hub adapter is correctly installed on the steering column shaft.
Horn does not work.Horn wiring disconnected or faulty. Fuse blown.Check all horn wiring connections. Inspect the vehicle's horn fuse and replace if necessary. Consult a professional if the issue persists.
Steering wheel is off-center when driving straight.Steering wheel or hub adapter was not aligned correctly during installation.Re-align the steering wheel and hub adapter. If necessary, a wheel alignment may be required.

8. Spezifikationen

Key specifications for the Grant Model 201 Wood Steering Wheel:

BesonderheitDetail
MarkeGewähren
Modellnummer201
Technische Daten39.37 x 11.43 x 38.74 cm (15.5 x 4.5 x 15.25 Zoll)
Artikelgewicht1.59 Kilogramm (3.5 Pfund)
MaterialWood (Walnut finish), Chrome-plated Steel
FarbeBraun
Montage erforderlichNo (Mounting kit assembly required)
Artikeldurchmesser15 Zoll (38.1 cm)
Griffgröße15 Zoll
Anzahl der Speichen3
Fahrzeug-ServicetypAuto
UPC081126002017

9. Garantie und Support

For information regarding product warranty, returns, or technical support, please refer to the official Grant webBesuchen Sie unsere Website oder wenden Sie sich an Ihren autorisierten Händler. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.