1. Einleitung
This manual provides detailed instructions for the installation, operation, and maintenance of your Lutron Maestro MSCLV-600M-SW Magnetic Low Voltage Digital Dimmer. This dimmer is designed for use with 600-watt magnetic low voltage lighting applications and supports multi-location dimming from up to ten locations when paired with coordinating Maestro Accessory Dimmers.
Zu den Hauptmerkmalen gehören:
- Multi-location dimming capability (up to nine accessory dimmers).
- One tap on/off to selected light level.
- Two taps for full brightness.
- Press and hold for a 10-second fade to off.
- Delayed off feature provides light as you exit the room.
- Rocker switch for precise light level adjustment.
2. Wichtige Sicherheitshinweise
WARNUNG: Stromschlaggefahr.
- Vor der Installation oder Wartung des Dimmers muss die Stromzufuhr am Sicherungsautomaten oder Sicherungskasten unterbrochen werden.
- Installation must be performed by a qualified electrician or trained personnel in accordance with all local and national electrical codes.
- Do not use with standard incandescent, LED, or electronic low voltage lighting. This dimmer is specifically for magnetic low voltage lädt.
- Stellen Sie sicher, dass das Gesamtwasser vorhanden isttage of the connected lighting does not exceed the dimmer's maximum rating of 600 watts.
- Ground the dimmer in accordance with local and national electrical codes.
3. Packungsinhalt
Your Lutron Maestro MSCLV-600M-SW package should include:
- One (1) Lutron Maestro MSCLV-600M-SW Digital Dimmer
- Installationsanleitung (dieses Dokument)
- Befestigungsschrauben
Note: Wall plates and coordinating accessory dimmers (for multi-location control) are sold separately.
4. Installationsanweisungen
Before beginning, ensure power is turned off at the circuit breaker. This dimmer is designed for single-pole or multi-location applications. For multi-location control, you will need one Maestro MSCLV-600M-SW dimmer and up to nine Maestro Accessory Dimmers.
4.1 Wiring Diagram (Typical Single-Pole Installation)
Refer to the diagram below for a typical single-pole wiring configuration. For multi-location wiring, consult the specific instructions provided with your Maestro Accessory Dimmers.
Bildbeschreibung: This image displays the Lutron Maestro MSCLV-600M-SW dimmer module from the front, showing its internal components and wiring terminals. Labels indicate 'POWER', 'TURN OFF', 'UP', 'ON', 'OFF', and '800W MAX' (note: product is 600W, this label might be generic for the series). The dimmer has a main rocker switch and a smaller vertical slider for dimming control, along with a row of indicator lights. The metal mounting straps are visible with regulatory markings.
- Strom ausschalten: Locate the circuit breaker that controls the lighting circuit and switch it to the OFF position. Verify power is off at the switch location using a voltage Tester.
- Vorhandenen Switch entfernen: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch.
- Drähte identifizieren: Identify the following wires in the wall box:
- Hot/Line Wire: The wire bringing power from the circuit breaker.
- Lastkabel: The wire going to the light fixture.
- Erdungskabel: Blankes Kupfer oder grün isolierter Draht.
- Neutralleiter: (If present, typically white) This dimmer does not require a neutral wire.
- Wire the Dimmer: Connect the wires from the wall box to the dimmer's terminals as follows:
- Verbinden Sie Hot/Line wire to the dimmer's designated line terminal (usually black).
- Verbinden Sie Laden wire to the dimmer's designated load terminal (usually red).
- Verbinden Sie Boden wire to the dimmer's green ground screw.
- For multi-location installations, connect the traveler wires according to the accessory dimmer instructions.
- Montieren Sie den Dimmer: Carefully fold the wires into the wall box and secure the dimmer to the wall box using the provided screws.
- Wandplatte installieren: Attach the coordinating wall plate (sold separately) over the dimmer.
- Strom wiederherstellen: Schalten Sie den Strom am Sicherungsautomaten wieder ein.
5. Bedienungsanleitung
The Lutron Maestro Digital Dimmer offers intuitive control over your magnetic low voltage Beleuchtung.
Bildbeschreibung: This image shows the Lutron Maestro MSCLV-600M-SW dimmer installed with a white faceplate. The main rocker switch and the smaller vertical slider are clearly visible, along with the row of five small LED indicator lights on the left side, with one light illuminated in yellow, indicating the current dimming level.
5.1 Grundlegende Bedienung
- Ein-/Ausschalten: Tap the main rocker switch once to turn the lights on to your previously selected level, or off.
- Volle Helligkeit: Tap the main rocker switch twice quickly to turn the lights on to full brightness.
- Dimmen/Aufhellen: Use the small vertical rocker switch on the right side to adjust the light level up or down. The LED indicator lights on the left will show the current brightness level.
- Delayed Off: Press and hold the main rocker switch for approximately 10 seconds. The lights will gradually fade to off, providing time to exit the room before the lights extinguish completely.
6. Wartung
Your Lutron Maestro dimmer is designed for long-lasting performance with minimal maintenance.
- Reinigung: To clean the dimmer and wall plate, wipe with a soft, damp Mit einem Tuch abwischen. Verwenden Sie keine Scheuermittel, Lösungsmittel oder chemische Sprays, da diese die Oberfläche oder die internen Bauteile beschädigen können.
- Keine vom Benutzer zu wartenden Teile: Im Inneren des Dimmers befinden sich keine vom Benutzer austauschbaren Teile. Versuchen Sie nicht, das Gerät zu öffnen oder zu reparieren.
7. Fehlerbehebung
If your Lutron Maestro dimmer is not functioning as expected, consult the following common issues and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Das Licht geht nicht an. | Der Strom ist am Sicherungsautomaten abgeschaltet. Wackelkontakt. Die Glühbirne(n) ist/sind durchgebrannt. | Check the circuit breaker and turn it ON. Prüfen Sie, ob alle Kabelverbindungen fest sitzen (stellen Sie vorher sicher, dass die Stromzufuhr unterbrochen ist). Glühbirne(n) austauschen. |
| Die Lichter dimmen oder flackern nicht. | Incorrect bulb type (not magnetic low voltagUnd). Gesamt-Wattage exceeds dimmer capacity. Lose Verkabelung. | Ensure you are using magnetic low voltage bulbs/fixtures. Reduzieren Sie den Gesamtwasserverbrauchtage of connected lights to below 600W. Überprüfen Sie die Kabelverbindungen (stellen Sie vorher sicher, dass die Stromzufuhr unterbrochen ist). |
| Der Dimmer fühlt sich warm an. | Normalbetrieb. | It is normal for dimmers to feel warm during operation. If it is excessively hot or emits smoke/odor, turn off power immediately and contact support. |
| Multi-location control not working. | Incorrect wiring for multi-location. Accessory dimmer not compatible or faulty. | Review multi-location wiring diagrams for the Maestro system. Ensure you are using genuine Lutron Maestro Accessory Dimmers. |
If the problem persists after trying these solutions, please contact Lutron Customer Support.
8. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Modellnummer | MSCLV-600M-SW |
| Marke | Lutron |
| Wastage | 600 Watts (Magnetic Low Voltage) |
| Betriebslautstärketage | 120 Volt Wechselstrom, 60 Hz |
| Betriebsmodus | Aus |
| Steuerungstyp | Touch with Dimmer Control |
| Antriebstyp | Druckknopf |
| Schaltungsart | 9-way (for multi-location with accessory dimmers) |
| Farbe | Schnee |
| Abmessungen (L x B x H) | 1.5 x 2.2 x 4.2 Zoll |
| Artikelgewicht | 4 Unzen |
| Konnektivitätsprotokoll | X-10 |
| Besondere Merkmale | Deep Back Cover |
9. Garantieinformationen
Specific warranty details for the Lutron Maestro MSCLV-600M-SW dimmer are typically provided with the product packaging or can be found on the official Lutron website. Lutron generally offers a limited warranty covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
10. Kundendienst
For additional assistance, technical support, or troubleshooting not covered in this manual, please contact Lutron Customer Support.
10.1 Lutron 24/7 Support Video
Videobeschreibung: This video highlights Lutron's commitment to customer support, emphasizing that help is available 24/7. It shows a person installing a Lutron product and then a customer service representative assisting a customer, conveying the ease of getting projects done with Lutron's continuous support.
Lutron 24/7 Support Phone: 844-588-7661
You can also visit the official Lutron website for more resources, FAQs, and product information.
